1
0
Commit Graph

97 Commits

Author SHA1 Message Date
Andrew Waterman
ec0d178010 Support M-mode-only implementations 2016-05-25 15:40:53 -07:00
Andrew Waterman
e82c080c3c Add blocking D$ 2016-05-25 11:09:50 -07:00
Howard Mao
f52fc655a5 remove zscale 2016-05-19 09:43:15 -07:00
Andrew Waterman
684d902059 Fix PLIC instantiation when S-mode is disabled 2016-05-13 11:22:46 -07:00
Andrew Waterman
6aa708bcee Disable MMIO by default to avoid disconnected nets 2016-05-11 13:12:39 -07:00
Andrew Waterman
aac89ca1f0 Add PLIC 2016-05-10 00:27:31 -07:00
Howard Mao
df479d7935 don't make MIFTagBits a computed parameter 2016-05-08 11:04:58 -07:00
Howard Mao
3b0e9167fa add AXI to AHB converter and more conformant HASTI RAM 2016-05-06 11:32:03 -07:00
Howard Mao
487d0b356e fixes to get groundtest working with priv-1.9 changes 2016-05-03 13:09:44 -07:00
Andrew Waterman
c7c8ae5468 Instantiate PRCI block 2016-05-02 18:08:33 -07:00
Andrew Waterman
46bbbba5e6 New address map 2016-04-30 20:59:36 -07:00
Andrew Waterman
d0aa4c722d More WIP on new memory map 2016-04-28 16:15:31 -07:00
Andrew Waterman
1f211b37df WIP on new memory map 2016-04-27 14:57:54 -07:00
Colin Schmidt
48170fd9aa add default cases to configs that use CDEMatchError
this avoids filling in the stack trace every time
a config doesn't contain the parameter
2016-04-22 12:14:58 -07:00
Howard Mao
f7af908969 put memory into the address map and no longer use MMIOBase 2016-04-21 18:53:16 -07:00
Andrew Waterman
b43a85e2e8 Make ExampleSmallConfig/DefaultRV32Config smaller 2016-04-01 18:18:08 -07:00
Andrew Waterman
6878e3265f Default RowBits to TileLink width, not XLen 2016-04-01 18:18:08 -07:00
Howard Mao
4f06a5ff6b add memtest config for testing memory channel mux 2016-03-31 18:41:56 -07:00
Howard Mao
5a74a9b1e7 switch memory interconnect from AXI to TileLink 2016-03-31 18:18:30 -07:00
Howard Mao
7c3b57b8fa switch MMIO network to TileLink 2016-03-31 14:30:10 -07:00
Howard Mao
1e03408323 get rid of mt benchmark suite 2016-03-29 20:16:07 -07:00
Howard Mao
ad93e0226d Changes to prepare for switch to TileLink interconnect
We are planning on switching to a TileLink interconnect throughout and
convert to AXI only on the very edge. Therefore, we need to get rid of
all the existing AXI masters other than the TileLink to AXI converter.

* Get rid of DMA engine for now
* Connect RTC to TileLink interconnect instead of AXI interconnect
2016-03-29 20:16:07 -07:00
Andrew Waterman
6c48dc3471 Use more sensible knob values for SmallConfig 2016-03-25 14:18:24 -07:00
Howard Mao
e90a9dfb2b make taking max of multiple integers in config a bit easier 2016-03-16 14:35:08 -07:00
Eric Love
4fc2a14a63 Fix MIF bug that cuts off upper xact id bits 2016-03-16 13:50:30 -07:00
Andrew Waterman
9dc0cbdfa4 WIP on privileged spec v1.9 2016-03-14 18:03:33 -07:00
Andrew Waterman
f2ded2721d Merge branch 'master' into add-rv32-support 2016-03-10 19:33:04 -08:00
Andrew Waterman
25091003af Add RV32 test/configuration options
These won't actually work until further commits.  Rocket RV32 support
is complete, but on the priv-1.9 branch.
2016-03-10 17:40:21 -08:00
Andrew Waterman
7a75a03123 tabs are evil 2016-03-10 14:18:56 -08:00
Howard Mao
3c9e63f5a5 don't make HTIF clock divider tied to backup memory 2016-03-09 14:58:20 -08:00
Albert Magyar
a80b0e959d Add support for per-way cache metadata
Adds a new cache parameter (SplitMetadata) and an associated knob.

Closes #62
2016-03-01 13:03:24 -08:00
Palmer Dabbelt
a0f3189c74 Change MIF_DATA_BITS back to 64
It turns out the Chisel C++ backend can't emit correct initialization
code for a 128 bit wide NastiROM.  Rather than trying to fix Chisel, I'm
just going to hack up the backup memory port Verilog harness a bit more
to make it work.

Note that the backup memory port Verilog already couldn't take arbitrary
parameters for MIF_*, so it's not like we're losing any flexibility
here.
2016-02-27 11:43:44 -08:00
Palmer Dabbelt
9ea8c4e781 Add an 8-channel backup memory port config
Now that the backup memory port works I want to test it.
2016-02-27 10:56:13 -08:00
Palmer Dabbelt
7c0c48fac4 Resurrect the backup memory port
We need this to work for our chip, and it's not been tested in a long
time in upstream -- it didn't even used to build since the Nasti
conversion.  This makes a few changes:

 * Rather than calling the backup memory port parameters MEM_*, it calls
   them MIF_* (to match the MIT* paramater objects).  A new name was
   necessary because the Nasti stuff is now dumped as MEM_*, which has
   similar names but incompatible values.

 * p(MIFDataBits) was changed back to 128, as otherwise the backup
   memory port doesn't work (it only send half a TileLink transaction).
   64 also causes readmemh to bail out, but changing the elf2hex parameters
   works around that.

 * A configuration was added that enabled the backup memory port in the
   tester.  While this is kind of an awkward way to do it, I want to
   make sure I can start testing this regularly and this makes it easy to
   integrate.
2016-02-27 10:46:56 -08:00
Yunsup Lee
a2381d2faf RoCC PTW refactoring 2016-02-25 17:26:42 -08:00
Palmer Dabbelt
926efd0cab Allow the number of memory channels to be picked at runtime
We're building a chip with 8 memory channels.  Since this will require a
complicated test setup we want to also be able to bring up the chip with fewer
memory channels.  This commit adds a SCR that controls the number of active
memory channels on a chip.  Toggling this SCR will scramble memory and drop
Nasti messages, so it's only possible to change while the chip is booting.

By default this just adds a 1-bit SCR, which essentially no extra logic.

When multiple memory channel configurations are enabled at elaboration time, a
NastiMemoryInterconnect is generated for each channel configuration.  The
number of outstanding misses is increased to coorespond to the maximum number
of banks per memory channel (added as a parameter), which I believe is
necessary to avoid deadlock in the memory system.

A configuration is added that supports 8 memory channels but has only 1 enabled
by default.
2016-02-17 15:23:30 -08:00
Christopher Celio
c1b4d9372f Revert "add new parameters for new SCR file"
This reverts commit 4dad5b8b32.

The commit breaks the build.
2016-02-13 04:02:20 -08:00
Christopher Celio
6c6bbca92a Revert "use singleton for global"
This reverts commit 4d0f941de3.

The commit breaks the build.
2016-02-13 03:56:47 -08:00
John Wright
4d0f941de3 use singleton for global 2016-02-13 00:56:11 -08:00
John Wright
4dad5b8b32 add new parameters for new SCR file 2016-02-12 18:24:12 -08:00
Howard Mao
9fb2216548 get rid of unused external mmio port 2016-02-10 21:49:02 -08:00
Howard Mao
06c3f9b655 Rocket Chip fixes in response to lowRISC team's comments
* DMA frontend-backend communication tunneled over TileLink/AXI
 * Split MMIO and Mem requests in l1tol2net instead of in AXI interconnect
 * Don't make NIOMSHRs configurable. Fixed at 1.
 * Connect accelerator-internal CSRs into the CSR file
 * Make mtvec register configurable and writeable
2016-02-02 13:14:52 -08:00
Howard Mao
806e40d19b implement DMA streaming functionality 2016-01-07 19:26:15 -08:00
Howard Mao
8190bf6e18 implement DMA unit 2015-12-16 21:27:48 -08:00
Howard Mao
560fdc19a8 add PLRU replacement option to L2 cache 2015-12-16 10:24:57 -08:00
Howard Mao
0c91e00676 move GroundTest configs to a separate file 2015-12-06 03:01:05 -08:00
Howard Mao
4f5dabcda2 add SCR file to device tree 2015-12-05 00:28:58 -08:00
Howard Mao
f35b83d3ca allow configuration of rocket ICache buffering 2015-12-02 17:18:39 -08:00
Howard Mao
cdc476a370 change Rocc parameterization 2015-12-01 17:56:09 -08:00
Andrew Waterman
e0d849fec5 Fix zscale testing
Use the following command in vsim:

make CONFIG=ZscaleConfig MODEL=ZscaleTop TB=ZscaleTestHarness run-asm-tests
2015-12-01 17:31:48 -08:00