Wesley W. Terpstra
5a1da63b5a
axi4: prototype ToTL adapter
2016-10-16 22:04:01 -07:00
Wesley W. Terpstra
72e5a97d40
tilelink2: factor out the OH1ToOH function
2016-10-16 22:04:01 -07:00
Wesley W. Terpstra
d09f43c32f
axi4 Bundles: add a size calculation helper
...
The old version was wrong.
Inverting before the << has a different width.
This means you end up with high bits set.
2016-10-16 22:04:01 -07:00
Wesley W. Terpstra
20288729b9
tilelink2 Isolation: cross the valid signals as well
...
Refactor the code to be less copy-pasty
2016-10-14 18:28:36 -07:00
Wesley W. Terpstra
680a944f07
regmapper RegisterCrossing: safe AsyncQueues are overkill here
2016-10-14 18:28:31 -07:00
Wesley W. Terpstra
ac0bb841da
AsyncQueue: cope with far reset propagation delay
2016-10-14 18:05:35 -07:00
Wesley W. Terpstra
8f3c2ddfc3
tilelink2 Crossing: these asserts should be done by the AsyncQueue
2016-10-14 16:54:09 -07:00
Wesley W. Terpstra
a82cfb8306
tilelink2: replace addr_hi with address ( #397 )
...
When faced with ambiguous routing of wmask=0, we decided to include
all the address bits. Hopefully in most cases the low bits will be
optimized away anyway.
2016-10-14 14:09:39 -07:00
Wesley W. Terpstra
4e40f9bb59
tilelink2 Nodes: appease the PC police
2016-10-13 17:02:18 -07:00
Wesley W. Terpstra
54b73aef57
tilelink2: WidthWidget and Fragmenter no longer erase latency
2016-10-13 17:02:18 -07:00
Wesley W. Terpstra
200cf3dd13
tilelink2 Nodes: include some options to test for conformance
2016-10-13 17:02:18 -07:00
Wesley W. Terpstra
5d5b5a66f4
tilelink2 RAMModel: fix a write-bad-data bug
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
e5a1483358
tilelink2 Fragmenter: eliminate most of the registers on A
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
99c7003d11
tilelink2: allow preemption of Fragmenter and WidthWidget
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
b42cfdc9dd
tilelink2 Arbiter: there is only one winner
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
b6e9b0c558
tilelink2 Arbiter: allow preemption of first beat
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
0aebf9e341
tilelink2 ToAXI4: no arbitration path register needed
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
0e897b905f
tilelink2 RegisterRouter: data path register is no longer required
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
c4eadd3ab3
tilelink2 Monitor: enforce stricter transaction ordering
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
d8a1163131
tilelink2 Monitor: don't enforce Irrevocable any more
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
405f66da32
tilelink2 WidthWidget: cope with Decoupled inputs
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
e2e72ac979
tilelink2 Fragmenter: cope with Decoupled input
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
023c6402e9
tilelink2: switch to DecoupledIO syntax
2016-10-13 17:02:17 -07:00
Wesley W. Terpstra
4c1c52486b
axi4 Fragmenter: handle more inflight AXI requests than we have space
2016-10-13 15:52:32 -07:00
Wesley W. Terpstra
8005266131
axi4 Fragmenter: refine sideband FSM for case of last fragment
2016-10-13 15:52:32 -07:00
Wesley W. Terpstra
19064e602b
axi4 Fragmenter: align all output accesses
...
We promised the output is aligned. Make good on that!
2016-10-13 15:52:27 -07:00
Wesley W. Terpstra
84be93f9f3
axi4 Fragmenter: confirm correct handling of last
2016-10-13 14:01:23 -07:00
Wesley W. Terpstra
1c79a23a8b
axi4 Fragmenter: initialize error response to 0
2016-10-13 13:46:24 -07:00
Wesley W. Terpstra
958af132ba
axi4 Fragmenter: optimize dynamic slave lookup
2016-10-12 17:29:38 -07:00
Wesley W. Terpstra
11169d155c
axi4: add a Buffer to put between nodes
2016-10-12 17:08:52 -07:00
Wesley W. Terpstra
a9a3f7dd4e
tilelink2 RAMModel: include name of test in output
2016-10-12 17:08:52 -07:00
Wesley W. Terpstra
345eefd81b
axi4: include unit tests
2016-10-12 17:08:52 -07:00
Wesley W. Terpstra
a6c6d99848
axi4: prototype Fragmenter
2016-10-12 17:08:49 -07:00
Wesley W. Terpstra
c918aa6d89
axi4: name AdapterNode parameters properly
2016-10-12 17:02:02 -07:00
Wesley W. Terpstra
a423f97844
axi4: parameterized AXI master constraint for aligned access
2016-10-12 17:02:02 -07:00
Wesley W. Terpstra
673cf1fdb5
tilelink2 ToAXI4: must create irrevocable D for now
2016-10-12 17:02:01 -07:00
Wesley W. Terpstra
8e92ac32b7
tilelink2 ToAXI4: we need a Queue on B to guarantee deadlock freedom
2016-10-12 17:02:01 -07:00
Wesley W. Terpstra
38b6c1c820
tilelink2 axi4: RegisterRouter can cut ready dependency
2016-10-12 17:02:01 -07:00
Wesley W. Terpstra
dc26736f32
axi4 tilelink2: include minAlignment and maxAddress in slaves
2016-10-12 17:02:01 -07:00
Wesley W. Terpstra
538437384a
tilelink2 Fragmenter: combine AccessAck errors
2016-10-12 17:02:01 -07:00
Wesley W. Terpstra
4caa543ad7
tilelink2: Fragmenter should not cut Acquire parameters
...
The correct response to misuse is to fail a requirement check.
Pretending that things are not caches could lead to inconsistency.
2016-10-11 22:38:03 -07:00
Wesley W. Terpstra
6336f94fa2
tilelink2: only caches can support B requests
2016-10-11 22:38:02 -07:00
Wesley W. Terpstra
4a975ca380
tilelink2: add a rightOR to go with our leftOR
2016-10-11 22:38:02 -07:00
Wesley W. Terpstra
b2a5d18e37
diplomacy: simplify address range fragmentation
2016-10-11 22:36:21 -07:00
Wesley W. Terpstra
b0e33f4a39
tilelink2: use TLArbiter in HintHandler
2016-10-10 13:15:28 -07:00
Wesley W. Terpstra
683a2e6785
tilelink2: refactor firstlast helper method
2016-10-10 13:15:28 -07:00
Wesley W. Terpstra
a404cd2abf
tilelink2: use NodeHandle to restore Crossing.node API
2016-10-10 13:15:28 -07:00
Wesley W. Terpstra
876609eb0e
diplomacy: add NodeHandles to support abstraction
2016-10-10 13:15:25 -07:00
Wesley W. Terpstra
97af07eb3e
tilelink2: clarify use of Isolation
2016-10-10 13:13:32 -07:00
Wesley W. Terpstra
76388117bb
regmapper: detect improper reset sequencing in RegisterCrossing
2016-10-10 13:13:32 -07:00
Wesley W. Terpstra
b5f5ef69c1
regmapper: eliminate race condition in RegisterCrossing bypass
2016-10-10 13:13:32 -07:00
Wesley W. Terpstra
f250426728
tilelink2: blow up if the channels carry data when they should not
2016-10-10 13:13:32 -07:00
Wesley W. Terpstra
1b09f1360d
AsyncQueue: adjust register names to match vals
2016-10-10 13:13:32 -07:00
Wesley W. Terpstra
e7f8a7e9ea
AsyncQueue: make it clear that the SyncChain is not Gray specific
2016-10-10 13:13:32 -07:00
Wesley W. Terpstra
52b8121e68
Apply "async_queue: Give names to all the registers which show up in the queue ( #390 )"
...
Adjusted to include names for the new registers.
Changes to RegisterCrossing were discarded.
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
ffb734ac0e
AsyncQueue: disambiguiate the reset_n signal names
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
5ee53c61d6
util: clarify an AsyncQueue corner-case
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
609fd97a71
util: AsyncQueue detect power-down/reset of non-empty queue
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
75bb94017b
util: resynchronize AsyncQueue counters when far side resets
...
If the other clock domain is much faster than ours, it's reset
might be shorter than a single cycle in our domain. In that case,
we need to catch the reset and extend it.
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
5e2609bdd2
AsyncQueueSource: don't feed reset into normal logic!
...
There is no need to block writes to mem during reset.
The Queue must be empty anyway.
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
2f6985efd3
crossings: use flip not flip()
...
This seems to be the more common API
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
6d6aa3eb13
tilelink2: Isolation must also connect reset_n
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
cb7b16f1a9
util: exchange resets between AsyncQueue source and sink
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
8c7d469a95
Revert "async_queue: Give names to all the registers which show up in the queue ( #390 )"
...
This reverts commit a84a961a39
.
The changes to RegisterCrossing.scala were unneeded after application of this branch.
The name changes made to the AsyncQueue.scala are reapplied at the end of this branch.
2016-10-10 13:13:31 -07:00
Wesley W. Terpstra
adf5f1807b
tilelink2: ToAXI4 bridge added
2016-10-10 11:21:50 -07:00
Wesley W. Terpstra
e856cbe3a6
axi4: SRAM for testing
2016-10-10 11:21:50 -07:00
Wesley W. Terpstra
abb02aa6f4
axi4: add a RegisterRouter for generic devices
2016-10-10 11:21:50 -07:00
Wesley W. Terpstra
2f7081aeaf
tilelink2: make mask generation reusable
2016-10-10 11:21:50 -07:00
Wesley W. Terpstra
b29d34038e
axi4: diplomacy capable AXI4
2016-10-10 11:21:50 -07:00
Wesley W. Terpstra
dcb9383568
PositionalMultiQueue: work around vcs Lint report
...
Lint-[PCTIO-L] Ports coerced to inout
rocket-chip/vsim/generated-src/unittest.UncoreUnitTestConfig.v, 127524
"io_deq_0_valid"
Port "io_deq_0_valid" declared as output in module "PositionalMultiQueue_16"
may need to be inout. Coercing to inout.
2016-10-10 11:21:49 -07:00
Wesley W. Terpstra
5d905a5310
PositionalMultiQueue: shared storage FIFO 1-push n-pop
2016-10-10 11:21:49 -07:00
mwachs5
3a1d8fe482
debug: use a different form of the crossing which doesn't create an AsyncScope ( #394 )
2016-10-09 20:33:18 -07:00
mwachs5
b5d4b72313
register_crossing: Remove the need for AsyncScope by specifying the master clock and reset. ( #393 )
2016-10-09 15:51:23 -07:00
Henry Cook
1e69a2dc1c
[tilelink2] allow TL monitors to be globally enabled or disabled ( #392 )
2016-10-09 12:34:10 -07:00
Andrew Waterman
53360f4c2c
Disable U-mode by default unless S-mode is present
2016-10-08 21:29:40 -07:00
Andrew Waterman
7f429e8799
Simplify AsyncResetReg
...
No need for AsyncSetReg, as AsyncResetReg can be used exclusively with
inverted inputs.
2016-10-08 21:29:40 -07:00
mwachs5
a84a961a39
async_queue: Give names to all the registers which show up in the queue ( #390 )
...
This is to aid debugging but even more so for backend constraint writers, who generally
need predictable names for registers to set false paths, etc.
2016-10-08 17:50:50 -07:00
Andrew Waterman
4fd03ffdf1
Fix PopCountAtLeast, un-breaking BTB
2016-10-07 21:20:40 -07:00
Wesley W. Terpstra
e5ac0f717f
tilelink2: split isolation gates by direction
2016-10-07 12:03:43 -07:00
Albert Ou
ad618fd55d
plic: Fix bit extraction
2016-10-06 18:05:03 -07:00
Andrew Waterman
b1c777c7a2
Fix PLIC enable bit access for #ints >= tlDataBits
2016-10-06 16:21:14 -07:00
Andrew Waterman
c22438b822
Fix an overly strict D$ assertion
2016-10-06 15:52:46 -07:00
Jacob Chang
fe641c14a1
tilelink2: Add support for different noise generator in fuzzer ( #386 )
2016-10-06 13:20:13 -07:00
Andrew Waterman
5980dc160f
Don't allow multiple entries for same PC in BTB
...
Necessary for RVC forward-progress guarantee.
2016-10-06 11:30:45 -07:00
Andrew Waterman
eddf1679f5
Use <> instead of := for bi-directional connections
2016-10-04 22:29:39 -07:00
Andrew Waterman
67593fdf2d
Explicitly zap some S-mode CSRs when not using S-mode
2016-10-04 22:29:39 -07:00
Andrew Waterman
968851f7e3
Default to configurable priorities
...
up-to-7 levels is kind of arbitrary, but I'm unwilling to introduce
a new Parameter at the moment.
2016-10-04 22:29:39 -07:00
mwachs5
e952f8f222
asyncqueue: Fix typo in the Async Queue ( #381 )
...
* asyncqueue: Fix typo in the Async Queue that would cause the sync depth to be one less than expected.
* asyncqueue: Typo in the typo fix
2016-10-04 21:02:06 -07:00
Andrew Waterman
064c9ebdc6
Don't report I$ fetch faults on TLB misses!
2016-10-04 14:37:25 -07:00
Andrew Waterman
516481b68b
Improve back-to-back integer multiplication performance
...
More exact hazard checking in the decode stage avoids a pipeline flush.
2016-10-04 14:37:25 -07:00
Andrew Waterman
7b69f1f261
Don't enter D$ flush state machine if grant outstanding
2016-10-04 14:37:25 -07:00
Andrew Waterman
28beb33943
Make any intervening load/store/fence fail an LR/SC sequence
...
This catches LR/SC misuses more quickly.
2016-10-04 14:37:25 -07:00
Yunsup Lee
62954d543e
correctly initialize the active flag
2016-10-03 17:56:30 -07:00
Wesley W. Terpstra
6ec2e7c5bd
tilelink2: Legacy should preserve the access size ( #378 )
...
* tilelink2: Legacy should preserve the access size
* Legacy: extract missing size information for TL1 Puts
2016-10-03 17:25:31 -07:00
Wesley W. Terpstra
f05298d9bc
tilelink2: move general-purpose code out of tilelink2 package
2016-10-03 16:22:28 -07:00
Wesley W. Terpstra
c85e42a303
tilelink2: Nodes should accept full PortParameters
...
We need this for terminal clients/managers that bridge multiple
non-TL2 devices.
2016-10-03 16:09:49 -07:00
Wesley W. Terpstra
f2ca2178bf
graphML: CTO's like colour
2016-10-03 15:05:45 -07:00
Wesley W. Terpstra
fe0875b084
LazyModule: output final verilog Module name
2016-10-03 15:05:45 -07:00
Wesley W. Terpstra
0a4ef66894
BaseTop: record top module; more general than GraphML
2016-10-03 15:05:45 -07:00
Wesley W. Terpstra
52c1a053ff
tilelink2 RegisterRouter: test fully Decoupled behaviour
2016-10-02 02:24:02 -07:00
Wesley W. Terpstra
422e6357a4
tilelink2 RegisterCrossing: Queues go from RV to Irrevocable
...
AsyncQueue is still a Queue.
2016-10-02 02:24:02 -07:00
Wesley W. Terpstra
02f89fb530
RegMapper: clarify interface is DecoupledIO
2016-10-02 02:24:02 -07:00
Wesley W. Terpstra
8a268268ad
tilelink2 RegField: clarify restrictions on functions
...
RegMapper is fundamentaly DecoupledIO.
Let the user take advantage of this.
Clarify that rules on data handling.
2016-10-02 02:24:02 -07:00
Wesley W. Terpstra
bff0ffa428
tilelink2 RegisterRouter: fix output data glitches
...
If a device changes a register while it's being read but not yet accepted,
this an lead to 'data' changing while 'valid' is high. A violation. The
problem is that RegMapper is fundamentally DecoupledIO. So fix it with a
Queue.
2016-10-02 02:24:02 -07:00
Andrew Waterman
e0188f8aa4
Don't implicitly fence on CSR instructions
...
CSRs that have an effect on I/O should use an explicit FENCE.
2016-10-01 19:44:10 -07:00
Andrew Waterman
b772edcb1b
Allow hit-under-MMIO and multiple MMIOs in blocking D$
...
The latter feature is by default disabled, since there aren't enough
ID bits.
2016-10-01 19:44:05 -07:00
Megan Wachs
28eba9b5ac
clint/plic: Move the default addresses
2016-10-01 15:46:55 -07:00
mwachs5
9a381e88d1
Suggest sane names for common objects ( #369 )
...
* Suggest sane names for common objects frequently instantiated with factory methods
* Suggest names for common primitives using more Scala-esque Options
2016-09-30 16:19:25 -07:00
Wesley W. Terpstra
0ebab0976a
tilelink2 Isolation: add enable signal ( #368 )
2016-09-30 04:54:40 -07:00
Wesley W. Terpstra
d3547a6193
tilelink2: Isolation gate insertion module
2016-09-30 01:50:33 -07:00
Wesley W. Terpstra
9b0654be52
tilelink2 Crossing: helpful constructor objects
2016-09-30 01:48:47 -07:00
Wesley W. Terpstra
80f7bb49e3
tilelink2: helper objects operate on OutwardNodes
2016-09-30 01:39:35 -07:00
Howard Mao
4b86802b1a
change the configuration interface of SlowIO
2016-09-29 22:16:53 -07:00
Wesley W. Terpstra
6d8c965f04
tilelink2 Crossing: cut the crossing between clock domains
2016-09-29 17:35:10 -07:00
Wesley W. Terpstra
20f42a8762
tilelink2: reuse the halves of the AsyncQueue
2016-09-29 17:35:08 -07:00
Wesley W. Terpstra
8e4c1e567c
tilelink2: add types for a TL clockless interface
2016-09-29 17:33:11 -07:00
Wesley W. Terpstra
02ce8c2ca4
tilelink2 Nodes: rename RootNode => BaseNode
2016-09-29 17:33:11 -07:00
Wesley W. Terpstra
754fcf9831
tilelink2: rename BaseNode to SimpleNode
2016-09-29 17:33:11 -07:00
Wesley W. Terpstra
cfdb8ca797
tilelink2 LazyModule: remove obsolete connect method
2016-09-29 17:33:11 -07:00
Wesley W. Terpstra
f2e438833c
tilelink2 Nodes: generalize a node into inner and outer halves
...
This lets us create nodes which transform from one bus to another.
2016-09-29 17:33:11 -07:00
Andrew Waterman
2bdf8c2be7
Merge branch 'master' into move-to-util
2016-09-29 14:42:11 -07:00
Howard Mao
ab3219cf6e
don't use Scala to Chisel implicit conversions outside of rocket
2016-09-29 14:35:42 -07:00
Howard Mao
9910c69c67
Move a bunch more things into util package
...
A lot of utility code was just being imported willy-nilly from one
package to another. This moves the common code into util to make things
more sensible. The code moved were
* The AsyncQueue and AsyncDecoupledCrossing from junctions.
* All of the code in rocket's util.scala
* The BlackBox asynchronous reset registers from uncore.tilelink2
* The implicit definitions from uncore.util
2016-09-29 14:23:42 -07:00
Andrew Waterman
e928b741ce
Default mtvec=0, not None
...
Setting it to None was a mistake. It makes it far harder to
diagnose boot bugs, as you end up fetching from random addreses
after trapping.
2016-09-29 13:52:41 -07:00
Megan Wachs
45bd63fcc6
jtag: Prevent Debug RAM accesses from wrapping around, and bring the DTM closer to the Debug Spec
2016-09-29 13:49:14 -07:00
Megan Wachs
449d689a4e
jtag: Connect the JTAG DTM side of the synchronizer!
2016-09-29 13:48:55 -07:00
Yunsup Lee
0924f8adb0
print out assigned inerrupt ranges
2016-09-29 11:59:32 -07:00
Yunsup Lee
4c3e8ec1b4
assign interrupt ranges deterministically
2016-09-29 11:59:32 -07:00
Henry Cook
7bca99a27a
[tilelink2] Add unit test configs to regression
2016-09-28 18:02:04 -07:00
Henry Cook
32f3f94882
[tilelink2] Fix zero-width wires in RAMModel.
2016-09-28 18:02:04 -07:00
Henry Cook
69e121260e
[tilelink2] Add unit tests for many TL2 components
...
These tests mostly use the Fuzzer and RAMModel to check that adapters
correctly handle randomly generated legal traffic.
2016-09-28 18:02:04 -07:00
Henry Cook
81123f84c9
[tilelink2] Make map generation in RRTests a def so that multiple RRTests can be instantiated as part of the same unit test suite. ( #356 )
2016-09-27 18:06:21 -07:00
Howard Mao
c45cc76cef
Get rid of remaining MemIO code
...
The only thing we were still using it for was for the MIFDataBits
and MIFTagBits parameters. We replace these with EdgeDataBits and
EdgeIDBits.
2016-09-27 16:28:17 -07:00
Howard Mao
18e7ea89f2
Get rid of broken groundtests
...
The NastiConverterTest, PCIeMockupTest, and DirectGroundtest
configurations have been broken by recent changes.
The NastiConverterTest has been superseded by a unit test and the
other two were only created for an attempt at FPGA debugging.
They weren't actually very useful for that purpose, so might as well get
rid of them.
2016-09-27 16:28:17 -07:00
Howard Mao
c77c244016
Get rid of NASTI memory interconnects
...
These were made for a previous Hurricane tapeout, but we are now doing
all of the memory routing in TileLink, so they are no longer needed.
2016-09-27 16:28:17 -07:00
mwachs5
f9e0a7ac24
Merge branch 'master' into async_register_crossing
2016-09-27 15:54:34 -07:00
Wesley W. Terpstra
3926cb936b
rocketchip: add pbus width and AMO With classes ( #357 )
2016-09-27 15:52:13 -07:00
Wesley W. Terpstra
eaea138d0d
tilelink2: don't use chisel3 namespace ( #355 )
2016-09-27 14:44:26 -07:00
Henry Cook
f5502df6ab
Merge branch 'master' into async_register_crossing
2016-09-27 14:08:27 -07:00
Wesley W. Terpstra
357d06ac9c
tilelink2 WidthWidget: Gets must have their mask adjusted ( #353 )
...
The mask of a Get should also be converted.
This manifested as a bug when going from 32=>64 bits. A large Get
could end up with mask that was not full.
2016-09-27 14:06:02 -07:00
Megan Wachs
3ce08f40a5
crossing: Remove reset from the logic in Register Crossing because it is no longer needed when the underlying crossings are asynchronously reset. Update the order of operations
2016-09-27 13:36:28 -07:00
Howard Mao
71a9c78e4b
add WidthAdapter from AXI slave to Coreplex TL slave
2016-09-27 12:48:01 -07:00
Howard Mao
7d6fb950b6
Give TileLink IDs more sensible names
...
* Outermost -> MCtoEdge
* MMIO_Outermost -> MMIOtoEdge
Then the corresponding parameters objects are
* L1toL2 -> innerParams
* L2toMC -> outerMemParams
* L2toMMIO -> outerMMIOParams
* MCtoEdge -> edgeMemParams
* MMIOtoEdge -> edgeMMIOParams
2016-09-27 12:48:01 -07:00
Howard Mao
8a55521b01
move memory width adapter from coreplex to periphery
2016-09-27 12:48:01 -07:00
Howard Mao
e36441a046
use correct parameters object for MMIO width adapter
2016-09-27 12:48:01 -07:00
Howard Mao
201e247f73
Factor coreplex IO connection into separate trait ( #350 )
...
This would allow, for instance, putting the coreplex on a separate clock
domain and crossing the IOs over through asynchronous queues.
The ExampleMultiClockTop* classes are removed since they no longer fit
into the class hierarchy.
2016-09-27 11:55:32 -07:00
Howard Mao
6316ebd58f
make naming of L2toMC parameter object consistent between coreplex and periphery
2016-09-26 17:28:21 -07:00
Howard Mao
ea9f0a868f
TileLink utility objects should not take implicit parameters
...
We have a handful of TileLink-related helper objects
(wrappers, unwrappers, width adapters, and enqueuers). Previously, using
them could be error-prone, because you had to make sure the implicit
parameters they took in had the same TLId as the TileLinkIO bundles
passed in as inputs. This is rather silly, we should just use the
parameters in the bundle.
2016-09-26 17:28:21 -07:00
Howard Mao
803739a95c
Make sure coreplex mmio's TLId is correct (thanks to zizztux)
2016-09-26 17:28:21 -07:00
Howard Mao
c741ada619
get TraceGen working again
2016-09-26 17:28:21 -07:00
Wesley W. Terpstra
d9e209365d
Tl2 addr width0 ( #346 )
...
* tilelink2 Edges: add accessor methods for address and addr_{hi,lo}
* tilelink2: use addr_lo instead of relying on truncation
Truncation can mess up if the width should be 0, but IS 1.
2016-09-26 17:00:03 -07:00
Wesley W. Terpstra
72c205b54f
tilelink2 AddressSet: add .misaligned(low, size) helper method ( #345 )
...
This helps devices with misaligned ranges still connect to TL2.
2016-09-26 16:01:09 -07:00
Wesley W. Terpstra
dd9558f45d
rocketchip: generate GraphML output
2016-09-26 14:35:46 -07:00
Wesley W. Terpstra
1773eb4405
tilelink2 LazyModule: output GraphML of the bus
2016-09-26 14:35:46 -07:00
Wesley W. Terpstra
35da9320bc
tilelink2 Nodes: expose connectivity in RootNode
2016-09-26 14:35:46 -07:00
Wesley W. Terpstra
14cd39e045
rocketchip: rename identically names devices with _%d ( #340 )
...
* rocketchip: rename identically names devices with _%d
If you connect two devices with the same name in TL2 (totally ok there),
when they get put into the TL1 addrmap, one gets silently overwritten.
This renames the second occurance as _1, third as _2, and so on...
* junctions: blow if duplicates add to addrmap
2016-09-26 13:05:49 -07:00
mwachs5
77a0f76289
Cleanup jtag dtm ( #342 )
...
* debug: Clean up Debug TransportModule synchronizer
With async reset async queues, I feel its safe/cleaner
to remove the one-off "AsyncMailbox verilog black-box
and use the common primitive.
I also added some comments about correct usage of this
block. Probably the 'TRST' signal should be renamed
to make it less confusing, as it requires some processing
of the real JTAG 'TRST' signal.
2016-09-26 11:10:27 -07:00
mwachs5
8641639873
Async rst async queue ( #336 )
...
* crossing: use async reset
* crossings: asyncqueue needs Asynchronous reset.
* crossing: Actually enable the head of the synchronizer flop chain
* crossing: remove reset from logic. This flop will no longer be written during reset because valid will be low.
* crossing: Tidy up code & comments
2016-09-26 11:08:38 -07:00
Wesley W. Terpstra
d787bae0d0
tilelink2 Xbar: decouple ready from valid ( #338 )
...
This moves the Xbar from using custom code to using the Arbiter.
The arbiter has better ready-valid decoupling.
2016-09-23 16:24:29 -07:00
Wesley W. Terpstra
d175bb314d
Periphery: make bus width and arithmetic atomics configurable ( #337 )
2016-09-23 15:25:58 -07:00
Wesley W. Terpstra
47843d8ec1
tilelink2: maxLgSize should be accurate ( #332 )
2016-09-22 22:06:22 -07:00
Wesley W. Terpstra
c5706afc11
RegField: remove obsolete split method
...
This is now natively supported by the regmap(...) invocation.
2016-09-22 20:52:47 -07:00
Wesley W. Terpstra
fc44151f10
RegField: add name and description fields
...
In the future we can generate interesting documentation and headers.
2016-09-22 20:52:46 -07:00
Wesley W. Terpstra
5e34b313ee
RegMapper: regmap(...) now takes BYTE addresses
...
If a device has configurable bus-width, we need a stable way of
enumerating registers. The byte offset stays unchanged.
This change also makes it possible to put an arbitrary number of RegFields
starting at some address which are then chopped up into appropriately bus-
sized registers.
2016-09-22 20:52:46 -07:00
Wesley W. Terpstra
972ca06729
RegField: remove RegField.bytes; it was dangerous
...
The implementation unconditionally drove the register.
This made it incompatible with drivers from the device itself.
Besides, writing only parts of a register at a time is ultra-shady.
2016-09-22 20:52:46 -07:00
Wesley W. Terpstra
a421469754
tilelink2: change adapters to use TLAdapter(params, defaults)(node)
...
This API makes it much more readable when you have multiple adapters
combined into a single line. The arguments for each adapter stay
beside the adapter.
For example, this:
peripheryBus.node := TLWidthWidget(TLBuffer(TLAtomicAutomata()(TLHintHandler(legacy.node))), legacy.tlDataBytes)
becomes this:
peripheryBus.node := TLWidthWidget(legacy.tlDataBytes)(TLBuffer()(TLAtomicAutomata()(TLHintHandler()(legacy.node))))
2016-09-22 20:52:46 -07:00
Howard Mao
22053289ef
fix typo rv64iu -> rv64ui
2016-09-22 17:33:35 -07:00
Henry Cook
673efb400d
Merge branch 'master' into unittest-config
2016-09-22 16:20:53 -07:00
Henry Cook
1e54820f8c
Merge remote-tracking branch 'origin/master' into unittest-config
2016-09-22 16:03:51 -07:00
Henry Cook
411ee378de
Provide a GeneratorApp object per user package. Extract RocketTestSuite from coreplex into rocketchip and provide GeneratorApp defaults for other target packages.
2016-09-22 15:59:29 -07:00
Henry Cook
391be8d740
tilelink2 RegisterRouter: minLatency is never more than 1
2016-09-22 15:51:15 -07:00
Wesley W. Terpstra
a3e88fa13a
tilelink2 Atomics: optimize the sign-extension circuit
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
9f1f6fc61f
Comparator: tolerate mismatched data when it is undefined
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
ed038678ef
tilelink2 Fuzzer: work around for firrtl/verilator performance issue
...
Big Vec()s cause very slow compilation.
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
1e7480b6fc
tilelink2 Monitor: work around for firrtl/verilator performance issue
...
Big Vec()s cause problems for these tools.
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
ec2030df31
tilelink2 Legacy: convert TL1 atomic operand size
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
0a3718881f
rocketchip: re-enable testing of atomics
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
e5da3eb8bb
tilelink2 Atomics: support arithmetic atomics
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
5b80fe5b51
tilelink2 Atomics: support Logical AMOs
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
4066fbe18f
tilelink2 RAMModel: exploit latency to remove bypass
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
e0ade8c5a9
tilelink2 Atomics: exploit minLatency to eliminate bypass
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
3bb2580223
tilelink2 Monitor: detect minLatency violations
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
2b24c4b1b4
tilelink2: most adapters can wipe away latency
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
c115913624
tilelink2 Buffer: increase the minLatency on ports
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
05beb20dc4
tilelink2: specify the minLatency for SRAM+RR
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
44277c1db3
tilelink2 Parameters: include a minLatency parameter for optimization
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
cf39c32b0e
tilelink2 Fuzzer: test Atomics
2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
2b9403633d
tilelink2 RAMModel: support (by ignoring) atomics
2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
ce204f604a
tilelink2 AtomicAutomata: prototype flow control complete
2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
42b10356fa
tilelink2: add a general-purpose Arbiter
2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
7636e772c8
tilelink2 Fuzzer: only generate legal atomics
2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
f5d604d8f8
tilelink2 Parameters: poison ports with unsafe atomics
...
We need to detect if an AtomicAutomata's output ever gets mixed
with some other source of operations.
2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
d1151e2f0f
tilelink2 Nodes: split connect into eager and lazy halves
2016-09-22 15:18:50 -07:00
Wesley W. Terpstra
684072023f
tilelink2 Monitor: make it a LazyModule in the hierarchy
2016-09-22 15:14:20 -07:00
Wesley W. Terpstra
def497861b
tilelink2 Bundles: add 1-way snoop bundles
2016-09-22 15:14:20 -07:00
Wesley W. Terpstra
69a1f8cd1f
tilelink2 Monitor: detect if sources are mishandled
2016-09-22 15:14:19 -07:00
Henry Cook
83c08a931d
[WIP] Generators for unittest and groundtest; disambiguate groundtest.TrafficGenerator
2016-09-22 14:57:18 -07:00
Henry Cook
47c5d1a992
[WIP] Move RocketTestSuite generation into RocketchipGenerator
2016-09-22 14:31:45 -07:00
Albert Ou
d76b762657
tilelink2 Fragmenter: Mask low bits of D channel addr_lo
...
This fixes an issue where passing addr_lo through unchanged triggered
unaligned address assertions in the Monitor.
2016-09-22 12:36:28 -07:00
Howard Mao
cd96a66ba6
replace verilog clock divider with one written in Chisel
2016-09-22 11:32:29 -07:00
Howard Mao
cbd702e48e
make sure junctions and uncore unittests both run
2016-09-21 20:17:52 -07:00
Yunsup Lee
1b1ef3be07
simplify base Coreplex bundle
2016-09-21 18:29:28 -07:00
Yunsup Lee
d2df6397cd
rename trc (tile reset clock) bundles to tcr (tile clock reset)
2016-09-21 18:29:28 -07:00
Yunsup Lee
5bb575ef74
rename internal/external MMIO network to cbus/pbus respectively
2016-09-21 18:29:28 -07:00
Henry Cook
64fe010369
[unittest] Config import tweaks
2016-09-21 17:40:39 -07:00
Henry Cook
fd5e00fed9
[coreplex] rename Testing.scala -> RocketTestSuite.scala
2016-09-21 17:35:39 -07:00
Henry Cook
270011b768
[unittest] more Config cleanup
2016-09-21 17:30:14 -07:00
Yunsup Lee
7afd630d3e
add multiclock support to Coreplex
2016-09-21 16:55:26 -07:00
Andrew Waterman
8e63f4a1a5
Remove ClockToSignal and vice-versa
...
Clock.asUInt and Bool.asClock now suffice.
2016-09-21 16:17:14 -07:00
Henry Cook
335e866176
[unittest] Parallelize UnitTestSuite ( #319 )
...
* [unittest] Parallelize UnitTestSuite so all tests have their own timer, runs until all finish or any timeout. Adds SimpleTimer.
* [util] Timer spacing cleanup
* [unittest] Remove Config reference to UnitTestTimeout
2016-09-21 13:05:22 -07:00
Andrew Waterman
12d0c00822
Fix mtime RegField handling
...
RegField.bytes was unconditionally overwriting mtime, preventing it
from ever ticking. Avoid RegField.bytes by splitting mtime into
a Seq of words.
2016-09-20 15:00:52 -07:00
Henry Cook
40f6f31611
[unittest] further refactor unittest framework
2016-09-20 14:14:30 -07:00
Henry Cook
ed91e9a89b
Merge remote-tracking branch 'origin' into testharness-refactor
2016-09-20 13:03:21 -07:00
Henry Cook
b97a0947a9
[rocketchip] enable piecewise Generator output
2016-09-20 12:57:56 -07:00
Yunsup Lee
1a09e46f69
Merge branch 'master' into fix-addrmap-error-msg
2016-09-19 18:08:58 -07:00
Andrew Waterman
3b38736a8e
Make BaseTopModule and BaseTopModule abstract
...
They aren't meant to be directly instantiated.
2016-09-19 17:18:35 -07:00
Andrew Waterman
d0572d6aab
Allow reset vector to be set dynamically
...
A chip's power-up sequence, or awake-from-sleep sequence, may wish to
set the reset PC based upon dynamic properties, e.g., the settings of
external pins. Support this by passing the reset vector to the Coreplex.
ExampleTop simply hard-wires the reset vector, as was the case before.
Additionally, allow MTVEC to *not* be reset. In most cases, including
riscv-tests, pk, and bbl, overriding MTVEC is one of the first things
that the boot sequence does. So the reset value is superfluous.
2016-09-19 17:18:03 -07:00
Andrew Waterman
e6c1bcfedd
Expose carry-out bits from WideCounter
2016-09-19 15:54:17 -07:00
Yunsup Lee
1b26d78114
correctly print out the addrmap overlapping error message
2016-09-19 13:34:58 -07:00
Henry Cook
df442ed82c
[rocketchip] avoid pending merge conflict]
2016-09-19 13:24:01 -07:00
Henry Cook
ddcf1b4099
Use PROJECT rather than MODEL in name of binary and generated src files.
2016-09-19 13:23:17 -07:00
Henry Cook
7b8aa6c839
[rocketchip] split out Base and Example tops
2016-09-19 11:00:13 -07:00
Andrew Waterman
a49814c667
Allow WideCounter to not be reset
2016-09-18 18:45:51 -07:00
Wesley W. Terpstra
9817a00ed9
tilelink2: Fuzzer should check address validity before injection
2016-09-17 17:07:21 -07:00
Wesley W. Terpstra
b11839f5a1
tilelink2: differentiate fast/safe address lookup cases
2016-09-17 17:04:18 -07:00
Wesley W. Terpstra
b4baae4214
tilelink2: minimize Xbar decode logic
2016-09-17 16:14:25 -07:00
Wesley W. Terpstra
76d8ed6a69
tilelink2: remove 'strided'; !contiguous is clearer
2016-09-17 16:14:25 -07:00
Wesley W. Terpstra
fa0f119f3c
tilelink2: consider the implications of negative address mask
2016-09-17 16:14:22 -07:00
Wesley W. Terpstra
e437508548
tilelink2: track interrupt connectivity like in TL2
2016-09-17 14:43:48 -07:00
Wesley W. Terpstra
01c1886b9d
Utils: cacheable only if there is a cache manager
2016-09-17 00:56:21 -07:00
Wesley W. Terpstra
6c3269a1d8
SRAM: optionally (default: true) executable
2016-09-17 00:19:37 -07:00
Wesley W. Terpstra
e749558190
ROM: optionally (default: true) executable
2016-09-17 00:19:09 -07:00
Wesley W. Terpstra
c70045b8b3
Utils: express cacheability from TL2 to TL1
2016-09-17 00:16:40 -07:00
Wesley W. Terpstra
e3d2bd3323
Top: print memory region properties, RWX [C]
2016-09-17 00:16:00 -07:00
Wesley W. Terpstra
5c858685aa
Utils: support managers with multiple addresses
2016-09-16 18:03:49 -07:00
Richard Xia
3fdf40c088
Change implicit argument to explicit.
2016-09-16 17:47:31 -07:00
Wesley W. Terpstra
a9382b3116
Periphery: test bench looks for "testram"
2016-09-16 17:47:20 -07:00
Wesley W. Terpstra
b5ce6150c7
Periphery: dynamically create address map + config string for TL2
2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
8876d83640
Prci: preserve Andrew's preferred clint name
2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
a357c1d42e
tilelink2: create DTS for devices automagically
2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
2587234838
tilelink2 TLNodes: capture nodePath in {Client,Manager}Parameters
2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
915a929af1
tilelink2: Nodes can now mix context into parameters
2016-09-16 17:28:47 -07:00
Richard Xia
63f13ae7ce
Merge remote-tracking branch 'origin/master' into rxia-testharness-refactor
2016-09-16 17:10:52 -07:00
Wesley W. Terpstra
dae0918c85
tilelink2 RegisterRouter: support undefZero
2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
f0f553f227
tilelink2 RegisterRouterTest: work around firrtl warning
...
Using io.wready leads to verilog that reads from the output...
Lint-[PCTIO-L] Ports coerced to inout
/scratch/terpstra/federation/rocket-chip/vsim/generated-src/UnitTestHarness.UnitTestConfig.v, 24860
"io_wready"
Port "io_wready" declared as output in module "RRTestCombinational_29" may
need to be inout. Coercing to inout.
2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
3fcc1a4460
tilelink2 RegisterRouterTest: don't couple fire into helpers
2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
2210e71f42
tilelink2 AddressDecoder: validate output of optimization
2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
023a54f122
tilelink2 AddressDecoder: improved heuristic
2016-09-16 16:09:00 -07:00
Andrew Waterman
86b70c8c59
Rename PRCI to CoreplexLocalInterrupter
...
That's all it's doing (there wasn't much PRC).
2016-09-16 14:26:34 -07:00
Wesley W. Terpstra
4b1de82c1d
RegField: separate UInt=>bytes and bytes=>regs
2016-09-16 14:24:28 -07:00
Wesley W. Terpstra
943c36954d
tilelink2 RegField: .bytes should update more than one byte!
2016-09-16 14:24:24 -07:00
Andrew Waterman
6134384da4
Fix deprecation warnings
2016-09-16 14:24:19 -07:00
mwachs5
a031686763
util: Do BlackBox Async Set/Reset Registers more properly ( #305 )
...
* util: Do Set/Reset Async Registers more properly
The way BlackBox "init" registers were coded before was
not really kosher verilog for most synthesis tools.
Also, the enable logic wasn't really pushed down into the flop.
This change is more explicit about set/reset flops,
again this is only a 'temporary' problem that would go away
with parameterizable blackboxes (or general async reset support).
* Tabs, not spaces, in Makefiles
* util: Fix typos in Async BB Reg Comments
2016-09-16 13:50:09 -07:00
Andrew Waterman
a94b4af92d
Simplify AsyncResetRegVec and make AsyncResetReg companion object
2016-09-16 11:25:10 -07:00
Wesley W. Terpstra
dd19e0911e
tilelink2: handle bus width=1
2016-09-15 22:15:11 -07:00
Wesley W. Terpstra
e1d7f6d7df
PRCI: always use bus width >= XLen
2016-09-15 22:15:07 -07:00
Wesley W. Terpstra
0e80f7fd0f
HintHandler: don't violate Irrevocable rules
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
f05222a072
testconfigs: disable atomics until AtomicAbsorber finished
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
38a9421c75
Comparator: don't compare addr_beat when it's irrelevant
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
669e3b0d96
Regression: fix-up address lookup
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
30fa4ea956
RegisterRouter: compress register mapping for sparse devices
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
6b1c57aedc
tilelink2: compute minimal decisive mask
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
fb24e847fd
rocketchip: globals are for sissies
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
644f8fe974
rocketchip: switch to TL2 mmio + port PRCI
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
91e7da4de3
tilelink2: make RegisterRouter constructor args public
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
3875e11b26
tilelink2: RegField splits up big registers
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
5c8e52ca32
devices: TL2 version of ROM
2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
3f30e11f16
tilelink2: Legacy, manager_xact_id does not matter for uncached
2016-09-15 21:28:55 -07:00
Wesley W. Terpstra
ddd93871d8
tilelink2: add an executable manager parameter
2016-09-15 21:28:55 -07:00
Wesley W. Terpstra
9442958d67
tilelink2: allow := on nodes outside the tilelink2 package
2016-09-15 21:28:55 -07:00
Jack Koenig
f2fe437fa4
Use CDEMatchError for improved performance ( #304 )
2016-09-15 19:47:18 -07:00
Henry Cook
851a336db4
[unittest] split out Config and TestHarness into separate files, minimize imports
2016-09-15 14:25:47 -07:00
Henry Cook
245f8ab76b
[util] move LatencyPipe into util
2016-09-15 13:30:34 -07:00
Henry Cook
a70d8c9821
Merge remote-tracking branch 'origin/master' into testharness-refactor
2016-09-15 13:27:07 -07:00
Henry Cook
be9ddae77f
make groundtest and unitest peers of rocketchip, with their own packages, harnesses and configs
2016-09-15 13:04:01 -07:00
Henry Cook
c6f252a913
Remove Option from success flag in coreplex; just use a sane default.
2016-09-15 12:19:22 -07:00
Henry Cook
888f6a2a55
Revert "move UnitTest back into rocketchip module"
...
This reverts commit f95b8c4ec2
.
2016-09-15 11:48:09 -07:00
Henry Cook
0a65238920
Merge branch 'master' into tl2-irrevocable
2016-09-15 10:30:50 -07:00
Howard Mao
49863944c4
merge ClientTileLinkEnqueuer and ClientUncachedTileLinkEnqueuer objects into TileLinkEnqueuer
2016-09-14 21:36:27 -07:00
Howard Mao
f363f5f709
wrap TestHarness latency pipe in module
2016-09-14 21:16:54 -07:00
Howard Mao
f5db83a72f
NTiles should not be a Knob
2016-09-14 21:16:54 -07:00
Howard Mao
646527c88e
use named constants to set AXI resp, cache, and prot fields
2016-09-14 21:16:54 -07:00
Howard Mao
f95b8c4ec2
move UnitTest back into rocketchip module
2016-09-14 20:51:56 -07:00
Henry Cook
cde104b3fa
[junctions] Removes the obsoleted SMI.
...
Closes #280 .
2016-09-14 20:06:22 -07:00
Henry Cook
ab3814dcee
Merge branch 'master' into tl2-irrevocable
2016-09-14 19:00:17 -07:00
Yunsup Lee
e404bea2ee
Merge branch 'master' into move-bootrom
2016-09-14 18:58:48 -07:00
Wesley W. Terpstra
1c7d7f9d32
tilelink2 RegisterRouterTest: stall on both edges
2016-09-14 18:22:12 -07:00
Yunsup Lee
97809b183f
refactor unittest framework
...
as a result, there's another SUITE that needs to run
2016-09-14 18:10:21 -07:00
Henry Cook
d35060b881
[junctions] messed up the merge lulz
2016-09-14 17:55:16 -07:00
Henry Cook
1b53e477fa
Merge branch 'master' of github.com:ucb-bar/rocket-chip into tl2-irrevocable
2016-09-14 17:50:17 -07:00
Henry Cook
e02d149cbe
[tilelink2] Convert TileLink2 to use IrrevocableIO. Add checks to the Monitor to enforce Irrevocable semantics on TLEdges. Update the RegisterRouterTests to pass the new Monitor assertions.
2016-09-14 17:43:07 -07:00
Henry Cook
08c4c7b985
[junctions] make async crossings capable of providing IrrevocableIO
2016-09-14 17:38:54 -07:00
Megan Wachs
1308680f75
Add some async/clock utilities
2016-09-14 16:30:59 -07:00
Yunsup Lee
710f1ec020
Move BootROM from Coreplex to Periphery
2016-09-14 16:09:59 -07:00
Henry Cook
aa3fa90fe3
[tilelink2] Monitor: miscopied name in assert message
2016-09-14 14:56:50 -07:00
Henry Cook
d76e19a6ab
[tilelink2] Monitor: simplify monitor interface. EdgeIn and EdgeOut are required to be the same, so why pass around both?
2016-09-14 14:23:23 -07:00
Andrew Waterman
565444c40e
Make UnitTestCoreplex cope with an external MMIO network
2016-09-14 12:19:21 -07:00
Andrew Waterman
5828e6042e
Work around https://github.com/ucb-bar/firrtl/issues/299
2016-09-14 11:47:10 -07:00
Andrew Waterman
c3ddff809b
Move PRCI from Coreplex to always-on block, where it belongs
2016-09-14 11:01:05 -07:00
Andrew Waterman
5566bf1b13
Don't route PLIC interrupts through PRCI
...
The PLIC is local to the Coreplex, and PRCI should not be.
2016-09-14 11:01:05 -07:00
mwachs5
47acbf928b
Give AsyncCrossing slave interfaces registers visibility into when they were written ( #288 )
2016-09-14 00:17:26 -07:00
Howard Mao
bdb7b1de36
move tilelink-agnostic counters from uncore to util package
2016-09-13 20:47:05 -07:00
Howard Mao
1882241493
move junctions utils into top-level utils package
2016-09-13 20:47:04 -07:00
Henry Cook
7dd4492abb
First cut at refactoring unittests into a top-level utility. Individual tests co-located with their DUT. No functional changes.
2016-09-13 20:30:14 -07:00
Wesley W. Terpstra
d23ab7370d
tilelink2: Unit Test for the RegisterCrossing
2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
cc88bf1b08
junctions: give unit tests more time
2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
acedd3688a
tilelink2: unit test for the clock crossing
2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
c8e6d47884
tilelink2: add a clock crossing adapter
2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
44501cdbf8
crossings: change defaults to sync=3 for safer settling time
...
Make the matching AsyncQueue depth=8 to support full throughput
2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
3348236320
junctions: remove obsolete Handshaker crossing
2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
fe6a67dd0e
tilelink2: add a RegisterCrossing primitive
2016-09-13 18:33:53 -07:00
Wesley W. Terpstra
d75f9d6a34
junctions: add an AsyncQueue
2016-09-13 17:38:18 -07:00
Wesley W. Terpstra
8142406d2e
junctions: refactor the Crossing type
2016-09-13 15:51:18 -07:00
Wesley W. Terpstra
ecdfb528c5
crossing: refactor AsyncDecoupled to provide AsyncDecoupledCrossing with no clock domain
2016-09-13 15:51:18 -07:00
Wesley W. Terpstra
33a05786db
tilelink2 RAMModel: fix put, get, putAck, getAck case ( #282 )
...
This case should result in undefined data for the Get.
It was previously requiring the Get to return the new Put data,
which is only guaranteed by a FIFO device.
2016-09-13 15:44:36 -07:00
Henry Cook
632b5896b9
Delete TestGraphs.scala
...
Re-do later using Fuzzer
2016-09-13 13:29:48 -07:00
Henry Cook
e318c29d48
[tilelink2] Fuzzer: Allow noise-making to be parameterized. Better comments.
2016-09-13 12:25:57 -07:00
Henry Cook
05100c12a7
Merge branch 'master' of github.com:ucb-bar/rocket-chip into monitor
2016-09-13 11:18:18 -07:00
Andrew Waterman
61cbe6164d
Add option to execute JAL from decode stage
...
This is particularly helpful for designs that don't have a BTB, but
it becomes the critical path for designs with RVC. Caveat emptor.
2016-09-13 02:32:00 -07:00
Wesley W. Terpstra
606f19a17f
tilelink2: RegisterRouter Unit Test
2016-09-12 22:13:39 -07:00
Wesley W. Terpstra
7005422651
tilelink2 HintHandler: don't HintAck in the middle of a multibeat op
2016-09-12 19:06:35 -07:00
Wesley W. Terpstra
273d3a73f2
tilelink2: Unit Test passes!
2016-09-12 18:39:50 -07:00
Wesley W. Terpstra
9874bc553a
tilelink2: Fragmenter supports Hints
2016-09-12 17:31:59 -07:00
Wesley W. Terpstra
42955a0490
tilelink2: HintHandler optimize to nothing if unneeded
2016-09-12 17:31:16 -07:00
Wesley W. Terpstra
94761f714d
tilelink2 HintHandler: fill in correct sink in responses
2016-09-12 17:26:40 -07:00
Wesley W. Terpstra
ca5f98f138
tilelink2: Hints are not special
...
Hints have a TransferSize limit just like all other message types.
2016-09-12 17:15:28 -07:00
Henry Cook
ad8e563c89
[tilelink2] Fuzzer: Rewrite of fuzzer
...
Multiple bug-fixes and actual source id generation.
2016-09-12 17:00:58 -07:00
Henry Cook
0b0c891179
[tilelink2] Monitor: Allow zero-mask PutPartials
...
this will require a larger address refactoring TBD
2016-09-12 17:00:50 -07:00
Henry Cook
c57b52ec86
tilelink2 Fragmenter: bugfix using D.hasData
2016-09-12 16:58:21 -07:00
Henry Cook
82681179cb
[tilelink2] Edges: add size to addr_lo.
...
addr_lo cannot correctly be deciphered from the mask alone.
OxC still has addr_lo === 0 if size is >1.
2016-09-12 16:58:09 -07:00
Andrew Waterman
88440ebf89
Use PseudoLRU in BTB when possible (for powers of two)
2016-09-12 16:52:03 -07:00
Andrew Waterman
266a2f24bd
Disable Mul early out by default if XLen == 32
...
With a default unroll of 8, it doesn't help performance, but costs area.
2016-09-12 16:50:08 -07:00
Andrew Waterman
96185e4b16
tighten an assert condition
...
dcache.s1_kill is a don't-care if dcache.req.valid wasn't previously high
2016-09-12 16:49:46 -07:00
Andrew Waterman
beb141a20b
Allow M, A, D, C extensions to be disabled in misa register
2016-09-12 16:49:46 -07:00
Howard Mao
f3cdeb08c6
pass nMemChannels to coreplex through CoreplexConfig
2016-09-12 12:40:10 -07:00
Howard Mao
9d9f90646d
allow configuration of simulation memory latency
2016-09-12 12:33:50 -07:00
Henry Cook
a21b04a7c1
playground for making different DAGs to use as DUTs
2016-09-12 10:32:45 -07:00
Henry Cook
0671d5d637
Initial version of fuzzer and simple ram fuzz test
2016-09-12 10:32:45 -07:00
Wesley W. Terpstra
7760459b76
tilelink2 RegisterRouter: add RegField test patterns
2016-09-12 10:32:25 -07:00
Wesley W. Terpstra
85ae77c108
tilelink2 RAMModule: carefully stage the pipeline to make BRAMs possible
2016-09-12 10:32:25 -07:00
Wesley W. Terpstra
9560df537c
tilelink2 RegisterRouter: allow sub-4k devices in order to make useful unit tests
2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
26f9e2dfbd
tilelink2 Parameters: fix width=1 address truncation bug
2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
98a4facac7
tilelink2 RAMModel: clear Mems on power-up
2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
17f7ab18de
tilelink2 RAMModel: model the state a RAM would have for Put+Gets
2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
488b93d146
tilelink2 Parameters: if you support PutPartial, you must support PutFull
2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
d6261e8ce8
tilelink2 Edge: add a numBeats1 method for predecremented code
2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
5604049927
tilelink2 Buffer: support an unlimited number of channels
2016-09-12 10:32:24 -07:00
Yunsup Lee
d985cdfc66
Merge branch 'master' into refactor-periphery
2016-09-10 23:42:13 -07:00
Yunsup Lee
fea31c7061
let GlobalAddrMap and ConfigString overridable
2016-09-10 23:39:44 -07:00
Yunsup Lee
bb3f514e8d
now able to add periphery devices through traits
...
Unfortunately, I had to touch a lot of code, which weren't quite possible to split up into multiple commits.
This commit gets rid of the "extra" infrastructure to add periphery devices into Top.
2016-09-10 23:39:29 -07:00