1
0
Commit Graph

280 Commits

Author SHA1 Message Date
Palmer Dabbelt
7c0c48fac4 Resurrect the backup memory port
We need this to work for our chip, and it's not been tested in a long
time in upstream -- it didn't even used to build since the Nasti
conversion.  This makes a few changes:

 * Rather than calling the backup memory port parameters MEM_*, it calls
   them MIF_* (to match the MIT* paramater objects).  A new name was
   necessary because the Nasti stuff is now dumped as MEM_*, which has
   similar names but incompatible values.

 * p(MIFDataBits) was changed back to 128, as otherwise the backup
   memory port doesn't work (it only send half a TileLink transaction).
   64 also causes readmemh to bail out, but changing the elf2hex parameters
   works around that.

 * A configuration was added that enabled the backup memory port in the
   tester.  While this is kind of an awkward way to do it, I want to
   make sure I can start testing this regularly and this makes it easy to
   integrate.
2016-02-27 10:46:56 -08:00
Yunsup Lee
a2381d2faf RoCC PTW refactoring 2016-02-25 17:26:42 -08:00
Colin Schmidt
ef4915bd2c make the asm suites ordered by their insertion order 2016-02-24 19:49:35 -08:00
Colin Schmidt
ad81d95751 add run-asm-{p,pt,v}-tests targets for convenience 2016-02-24 19:49:35 -08:00
John Wright
b04cd545b6 pass base SCR address to SCRFile for address calculation 2016-02-24 15:32:46 -08:00
Howard Mao
8a877fa620 Add Matthew Naylor's trace generator and AXE scripts 2016-02-24 14:39:11 -08:00
Howard Mao
8c02cb09ca some additions to Travis and fixes for Testing 2016-02-23 23:37:29 -08:00
Palmer Dabbelt
c263c636b3 Actually reference all the tests from RISCV 2016-02-23 16:05:27 -08:00
Palmer Dabbelt
bae4c0c0c9 Point Testing to $RISCV/... not $base_dir/...
This uses the compiled tests in RISCV, which match the rest of the toolchain.
2016-02-23 10:58:51 -08:00
Colin Schmidt
4ce603e548 Memtest configs should not have a hex file loaded 2016-02-22 12:49:26 -08:00
Colin Schmidt
0c575403af only use a single asm test and 1 bmark for memtest 2016-02-22 09:36:53 -08:00
Howard Mao
5e4a02038c move FPGA AXI to HTIF converter into Chisel module 2016-02-19 13:53:31 -08:00
Palmer Dabbelt
926efd0cab Allow the number of memory channels to be picked at runtime
We're building a chip with 8 memory channels.  Since this will require a
complicated test setup we want to also be able to bring up the chip with fewer
memory channels.  This commit adds a SCR that controls the number of active
memory channels on a chip.  Toggling this SCR will scramble memory and drop
Nasti messages, so it's only possible to change while the chip is booting.

By default this just adds a 1-bit SCR, which essentially no extra logic.

When multiple memory channel configurations are enabled at elaboration time, a
NastiMemoryInterconnect is generated for each channel configuration.  The
number of outstanding misses is increased to coorespond to the maximum number
of banks per memory channel (added as a parameter), which I believe is
necessary to avoid deadlock in the memory system.

A configuration is added that supports 8 memory channels but has only 1 enabled
by default.
2016-02-17 15:23:30 -08:00
Palmer Dabbelt
db9de94588 Generate and use SCR address header files
This uses the new SCRFile changes to generate a header file containing a list
of all the SCRs in a core to remove the magic constant "63" (the HTIF clock
divider control register) and replace it with a generated number (which is
still 63).
2016-02-17 15:23:18 -08:00
Christopher Celio
c1b4d9372f Revert "add new parameters for new SCR file"
This reverts commit 4dad5b8b32.

The commit breaks the build.
2016-02-13 04:02:20 -08:00
Christopher Celio
6c6bbca92a Revert "use singleton for global"
This reverts commit 4d0f941de3.

The commit breaks the build.
2016-02-13 03:56:47 -08:00
John Wright
4d0f941de3 use singleton for global 2016-02-13 00:56:11 -08:00
John Wright
4dad5b8b32 add new parameters for new SCR file 2016-02-12 18:24:12 -08:00
Howard Mao
9fb2216548 get rid of unused external mmio port 2016-02-10 21:49:02 -08:00
Howard Mao
72a876bfba add NASTI to TL converter 2016-02-10 11:12:39 -08:00
Palmer Dabbelt
b2ed35e8aa Print a better error on missing config classes
Without this you don't actually see what config class you tried to use, which
makes it hard to grep around Makefiles to see why things are broken.
2016-02-05 09:59:02 -08:00
Palmer Dabbelt
8422aaf6fc Add a "/" when targetDir doesn't have one
This isn't Chisel 3 specific, but that's what I happened to do in the Chisel 3
Driver wrapper.
2016-02-05 09:57:47 -08:00
Palmer Dabbelt
3bb0f11e6c Chisel3 <> reverse fix 2016-02-05 09:56:42 -08:00
Howard Mao
06c3f9b655 Rocket Chip fixes in response to lowRISC team's comments
* DMA frontend-backend communication tunneled over TileLink/AXI
 * Split MMIO and Mem requests in l1tol2net instead of in AXI interconnect
 * Don't make NIOMSHRs configurable. Fixed at 1.
 * Connect accelerator-internal CSRs into the CSR file
 * Make mtvec register configurable and writeable
2016-02-02 13:14:52 -08:00
Howard Mao
33aa64212d fix more Chisel3 deprecations 2016-01-14 15:06:30 -08:00
Howard Mao
c06884b78c lowercase SMI to Smi 2016-01-11 17:44:10 -08:00
Howard Mao
806e40d19b implement DMA streaming functionality 2016-01-07 19:26:15 -08:00
Howard Mao
8190bf6e18 implement DMA unit 2015-12-16 21:27:48 -08:00
Howard Mao
1a272677ca more fixes to L2 cache 2015-12-16 21:06:39 -08:00
Howard Mao
560fdc19a8 add PLRU replacement option to L2 cache 2015-12-16 10:24:57 -08:00
Howard Mao
7ad9deeaee Fix issues with request merging in L2 cache and add regression tests
In addition to the fix, there are several additions to the
RegressionTest module. The set of regressions is now parameterized and
split into ones for the cache and ones for the broadcast hub.
2015-12-15 23:02:15 -08:00
Howard Mao
0c91e00676 move GroundTest configs to a separate file 2015-12-06 03:01:05 -08:00
Howard Mao
4f5dabcda2 add SCR file to device tree 2015-12-05 00:28:58 -08:00
Howard Mao
f35b83d3ca allow configuration of rocket ICache buffering 2015-12-02 17:18:39 -08:00
Howard Mao
cdc476a370 change Rocc parameterization 2015-12-01 17:56:09 -08:00
Andrew Waterman
e0d849fec5 Fix zscale testing
Use the following command in vsim:

make CONFIG=ZscaleConfig MODEL=ZscaleTop TB=ZscaleTestHarness run-asm-tests
2015-12-01 17:31:48 -08:00
Howard Mao
c8c68e75bb base NGenerators on NTiles, not the other way around 2015-12-01 15:26:09 -08:00
Howard Mao
40d68406d6 use xlen parameter for ALU 2015-11-30 18:04:44 -08:00
Howard Mao
23f0756978 implement support for multiple RoCC accelerators 2015-11-26 12:49:04 -08:00
Andrew Waterman
e25a020e60 Construct device tree ROM in MMIO region
Rebuild riscv-tools for this to work!
2015-11-25 21:23:37 -08:00
Howard Mao
ec6bfde9a3 fix WritebackUnit issue in uncore 2015-11-21 16:11:22 -08:00
Howard Mao
9d50f37289 fix unused set issue for multiple L2 cache banks 2015-11-20 23:26:28 -08:00
Howard Mao
ad3b7fd0e1 adjust CacheFillTest configuration 2015-11-19 10:52:14 -08:00
Howard Mao
4806f72b08 add CacheFillTest to check L2 conflict misses 2015-11-19 00:16:28 -08:00
Howard Mao
3514b6eb87 add some more useful configurations 2015-11-18 22:11:17 -08:00
Howard Mao
379d43d5f4 make MultiChannel routing more performant 2015-11-18 22:11:17 -08:00
Andrew Waterman
5195a5b891 Remove IPI network
This is now provided via MMIO.
2015-11-16 21:53:14 -08:00
Howard Mao
a1063bad54 fix issues with non-allocating put/get 2015-11-12 15:54:34 -08:00
Howard Mao
6ddf81090b didn't mean to turn off GenerateCached in last commit 2015-11-11 17:39:08 -08:00
Howard Mao
11f0b3d8db restore old L2 cache AcquireTransactor configuration 2015-11-11 17:10:58 -08:00
Howard Mao
31da692ccc default to single tile in WithMemtest 2015-11-11 14:54:13 -08:00
Howard Mao
55581195eb add groundtest submodule for simple memory testing 2015-11-11 14:33:02 -08:00
Howard Mao
149480411e make sure ClientTileLinkEnqueuer uses the correct parameters 2015-11-10 16:09:19 -08:00
Howard Mao
51f128ec74 actually use backendBuffering in front of unwrapper/converter chain 2015-11-09 11:50:18 -08:00
Howard Mao
bbf14ddc01 use definitions in consts header whenever possible 2015-11-05 10:48:32 -08:00
Howard Mao
7b252d8f89 get rid of now-unnecessary bits in MIF tag 2015-11-05 10:48:32 -08:00
Sagar Karandikar
ee9195be26 rename NBANKS knob to NBANKS_PER_MEM_CHANNEL for clarity 2015-11-05 10:48:32 -08:00
Sagar Karandikar
354abf5e6b fix NSets calculation 2015-11-05 10:48:32 -08:00
Howard Mao
dcef020ca0 get multichannel simulation working in emulator 2015-11-05 10:48:32 -08:00
Howard Mao
04d92dddbd add back decoupled NASTI connection at edge of RocketChip 2015-11-05 10:48:32 -08:00
Yunsup Lee
51116e0674 add 2 and 4 memory channel configs 2015-11-05 10:48:32 -08:00
Yunsup Lee
0d245741bc add multichannel NASTI support in Verilog testbench 2015-11-05 10:48:32 -08:00
Howard Mao
9dabcab9c2 Get rid of MemIO in Top and replace with AXI throughout 2015-11-05 10:48:32 -08:00
Howard Mao
eb62ff6a50 add queues between Nasti -> TL converter and Nasti interconnect 2015-10-26 14:15:25 -07:00
Howard Mao
f37938e4de implement MultiChannel routing 2015-10-26 14:15:25 -07:00
Yunsup Lee
a175afae73 make ZscaleChip work with new parameters framework 2015-10-25 10:24:39 -07:00
Colin Schmidt
854feab08e add knob and constraint dumping 2015-10-22 17:25:38 -07:00
Henry Cook
9769b2747c now depend on external cde library rather than chisel.params (bump all submodules) 2015-10-21 18:24:16 -07:00
Howard Mao
c311c9938e nitpicky declaration move 2015-10-20 21:10:54 -07:00
Henry Cook
62765e9609 L2 rowBits param bugfix 2015-10-20 18:57:19 -07:00
Henry Cook
3fc630405b Vectorize RoCC and Tile memory interfaces (bump uncore, rocket, zscale) 2015-10-20 15:05:12 -07:00
Henry Cook
8c3370c2e3 L2 AMOALU bugfix and simpler TileLinkParameters (bump rocket, uncore, zscale) 2015-10-16 19:15:47 -07:00
Howard Mao
c4117eb9a2 make sure TL parameters change properly throughout
* Outermost TL parameters should have the width set to be the same as the
   MIF data width.
 * Broadcast Hub and Narrower, which use different sets of TL parameters
   should use the proper set of parameters at each interface
2015-10-14 18:03:39 -07:00
Henry Cook
4270fd78a5 Merge branch 'param-refactor-tl' 2015-10-14 12:16:22 -07:00
Henry Cook
dd5052888d refactor tilelink params, compiles but ExampleSmallConfig fails 2015-10-13 23:44:05 -07:00
Howard Mao
a44e054c77 add support for different TileLink and MIF data widths 2015-10-13 12:46:23 -07:00
Henry Cook
9d11b64c75 added HasAddrMapParameters and GlobalAddrMap 2015-10-06 18:24:08 -07:00
Henry Cook
1c489d75c1 inject params at top-level for MemDessert 2015-10-06 16:26:58 -07:00
Henry Cook
c4eadbda57 Removed all traces of params 2015-10-06 11:42:06 -07:00
Henry Cook
38ae2707a3 refactor MemIO to not use params 2015-10-06 11:41:48 -07:00
Henry Cook
3d10a89907 refactor NASTI to not use param; new AddrMap class 2015-10-06 11:41:47 -07:00
Andrew Waterman
79cdf6efc0 Make perf counters optional 2015-09-28 13:56:08 -07:00
Howard Mao
7b0167b92e make sure SCR and PCR data width matches xLen 2015-09-25 12:13:22 -07:00
Howard Mao
0d763524ef make sure conf address map scales with number of cores 2015-09-25 09:41:19 -07:00
Howard Mao
8d4d8680bf replace NASTIMasterIO and NASTISlaveIO with NASTIIO 2015-09-24 16:59:13 -07:00
Howard Mao
56ecdff52d Implement NASTI-based Mem/IO interconnect 2015-09-22 10:32:31 -07:00
Andrew Waterman
c6bcc832a1 Chisel3: Don't use Vec.fill for IOs 2015-09-20 13:43:56 -07:00
Christopher Celio
c9d89226fb Generated *.d file of tests now kept in order
-Changed Set to LinkedHashSet in Testing.scala
2015-09-11 18:36:04 -07:00
Andrew Waterman
700910adff Chisel3 compatibility fix for <> 2015-08-05 15:34:40 -07:00
Andrew Waterman
34b9a7fdc5 Various Chisel3 compatibility changes 2015-08-03 18:54:56 -07:00
Henry Cook
0c9a7817b6 Reduce outstanding mem accesses for FPGAConfig (to reduce MIFTagBits < 7) 2015-07-30 16:30:00 -07:00
Henry Cook
51c42083d0 Add new junctions repo as submodule (contains externally facing buses and peripherals).
Bump all submodules.
2015-07-29 18:15:45 -07:00
Henry Cook
d21ffa4dba Streamline makefiles for more robust test dependency generation. Note: emulator/generated-src-debug no longer used 2015-07-28 00:24:07 -07:00
Yunsup Lee
efd6458a3d add zscale programs 2015-07-27 19:06:06 -07:00
Henry Cook
bd4ff35a4b Upgrade sbt to 0.13.8, simplify build.scala Tasks, generate tests from TestGenerator App, set addons with env variable ROCKETCHIP_ADDONS 2015-07-22 11:49:10 -07:00
Yunsup Lee
a99b1e3a01 append config name to generated Makefrag filename 2015-07-17 12:34:49 -07:00
Yunsup Lee
e7802825c3 add Zscale testing 2015-07-17 12:02:02 -07:00
Yunsup Lee
4c7c3f5bb2 add test generate for ZscaleTop 2015-07-14 16:26:28 -07:00
Henry Cook
76046c52fe Cleanup testing rv64uf 2015-07-13 18:58:58 -07:00
Henry Cook
302cd3e638 Added BuildZscale param for use in Top and makefrag generation 2015-07-13 15:46:42 -07:00