1
0
Commit Graph

993 Commits

Author SHA1 Message Date
Howard Mao
803739a95c Make sure coreplex mmio's TLId is correct (thanks to zizztux) 2016-09-26 17:28:21 -07:00
Howard Mao
c741ada619 get TraceGen working again 2016-09-26 17:28:21 -07:00
Wesley W. Terpstra
d9e209365d Tl2 addr width0 (#346)
* tilelink2 Edges: add accessor methods for address and addr_{hi,lo}

* tilelink2: use addr_lo instead of relying on truncation

Truncation can mess up if the width should be 0, but IS 1.
2016-09-26 17:00:03 -07:00
Wesley W. Terpstra
72c205b54f tilelink2 AddressSet: add .misaligned(low, size) helper method (#345)
This helps devices with misaligned ranges still connect to TL2.
2016-09-26 16:01:09 -07:00
Wesley W. Terpstra
dd9558f45d rocketchip: generate GraphML output 2016-09-26 14:35:46 -07:00
Wesley W. Terpstra
1773eb4405 tilelink2 LazyModule: output GraphML of the bus 2016-09-26 14:35:46 -07:00
Wesley W. Terpstra
35da9320bc tilelink2 Nodes: expose connectivity in RootNode 2016-09-26 14:35:46 -07:00
Wesley W. Terpstra
14cd39e045 rocketchip: rename identically names devices with _%d (#340)
* rocketchip: rename identically names devices with _%d

If you connect two devices with the same name in TL2 (totally ok there),
when they get put into the TL1 addrmap, one gets silently overwritten.
This renames the second occurance as _1, third as _2, and so on...

* junctions: blow if duplicates add to addrmap
2016-09-26 13:05:49 -07:00
mwachs5
77a0f76289 Cleanup jtag dtm (#342)
* debug: Clean up Debug TransportModule synchronizer

With async reset async queues, I feel its safe/cleaner
to remove the one-off "AsyncMailbox verilog black-box
and use the common primitive.

I also added some comments about correct usage of this
block. Probably the 'TRST' signal should be renamed
to make it less confusing, as it requires some processing
of the real JTAG 'TRST' signal.
2016-09-26 11:10:27 -07:00
mwachs5
8641639873 Async rst async queue (#336)
* crossing: use async reset

* crossings: asyncqueue needs Asynchronous reset.

* crossing: Actually enable the head of the synchronizer flop chain

* crossing: remove reset from logic. This flop will no longer be written during reset because valid will be low.

* crossing: Tidy up code  & comments
2016-09-26 11:08:38 -07:00
Wesley W. Terpstra
d787bae0d0 tilelink2 Xbar: decouple ready from valid (#338)
This moves the Xbar from using custom code to using the Arbiter.
The arbiter has better ready-valid decoupling.
2016-09-23 16:24:29 -07:00
Wesley W. Terpstra
d175bb314d Periphery: make bus width and arithmetic atomics configurable (#337) 2016-09-23 15:25:58 -07:00
Wesley W. Terpstra
47843d8ec1 tilelink2: maxLgSize should be accurate (#332) 2016-09-22 22:06:22 -07:00
Wesley W. Terpstra
c5706afc11 RegField: remove obsolete split method
This is now natively supported by the regmap(...) invocation.
2016-09-22 20:52:47 -07:00
Wesley W. Terpstra
fc44151f10 RegField: add name and description fields
In the future we can generate interesting documentation and headers.
2016-09-22 20:52:46 -07:00
Wesley W. Terpstra
5e34b313ee RegMapper: regmap(...) now takes BYTE addresses
If a device has configurable bus-width, we need a stable way of
enumerating registers. The byte offset stays unchanged.

This change also makes it possible to put an arbitrary number of RegFields
starting at some address which are then chopped up into appropriately bus-
sized registers.
2016-09-22 20:52:46 -07:00
Wesley W. Terpstra
972ca06729 RegField: remove RegField.bytes; it was dangerous
The implementation unconditionally drove the register.
This made it incompatible with drivers from the device itself.
Besides, writing only parts of a register at a time is ultra-shady.
2016-09-22 20:52:46 -07:00
Wesley W. Terpstra
a421469754 tilelink2: change adapters to use TLAdapter(params, defaults)(node)
This API makes it much more readable when you have multiple adapters
combined into a single line. The arguments for each adapter stay
beside the adapter.

For example, this:
  peripheryBus.node := TLWidthWidget(TLBuffer(TLAtomicAutomata()(TLHintHandler(legacy.node))), legacy.tlDataBytes)
becomes this:
  peripheryBus.node := TLWidthWidget(legacy.tlDataBytes)(TLBuffer()(TLAtomicAutomata()(TLHintHandler()(legacy.node))))
2016-09-22 20:52:46 -07:00
Howard Mao
22053289ef fix typo rv64iu -> rv64ui 2016-09-22 17:33:35 -07:00
Henry Cook
673efb400d Merge branch 'master' into unittest-config 2016-09-22 16:20:53 -07:00
Henry Cook
1e54820f8c Merge remote-tracking branch 'origin/master' into unittest-config 2016-09-22 16:03:51 -07:00
Henry Cook
411ee378de Provide a GeneratorApp object per user package. Extract RocketTestSuite from coreplex into rocketchip and provide GeneratorApp defaults for other target packages. 2016-09-22 15:59:29 -07:00
Henry Cook
391be8d740 tilelink2 RegisterRouter: minLatency is never more than 1 2016-09-22 15:51:15 -07:00
Wesley W. Terpstra
a3e88fa13a tilelink2 Atomics: optimize the sign-extension circuit 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
9f1f6fc61f Comparator: tolerate mismatched data when it is undefined 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
ed038678ef tilelink2 Fuzzer: work around for firrtl/verilator performance issue
Big Vec()s cause very slow compilation.
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
1e7480b6fc tilelink2 Monitor: work around for firrtl/verilator performance issue
Big Vec()s cause problems for these tools.
2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
ec2030df31 tilelink2 Legacy: convert TL1 atomic operand size 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
0a3718881f rocketchip: re-enable testing of atomics 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
e5da3eb8bb tilelink2 Atomics: support arithmetic atomics 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
5b80fe5b51 tilelink2 Atomics: support Logical AMOs 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
4066fbe18f tilelink2 RAMModel: exploit latency to remove bypass 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
e0ade8c5a9 tilelink2 Atomics: exploit minLatency to eliminate bypass 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
3bb2580223 tilelink2 Monitor: detect minLatency violations 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
2b24c4b1b4 tilelink2: most adapters can wipe away latency 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
c115913624 tilelink2 Buffer: increase the minLatency on ports 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
05beb20dc4 tilelink2: specify the minLatency for SRAM+RR 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
44277c1db3 tilelink2 Parameters: include a minLatency parameter for optimization 2016-09-22 15:18:54 -07:00
Wesley W. Terpstra
cf39c32b0e tilelink2 Fuzzer: test Atomics 2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
2b9403633d tilelink2 RAMModel: support (by ignoring) atomics 2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
ce204f604a tilelink2 AtomicAutomata: prototype flow control complete 2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
42b10356fa tilelink2: add a general-purpose Arbiter 2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
7636e772c8 tilelink2 Fuzzer: only generate legal atomics 2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
f5d604d8f8 tilelink2 Parameters: poison ports with unsafe atomics
We need to detect if an AtomicAutomata's output ever gets mixed
with some other source of operations.
2016-09-22 15:18:53 -07:00
Wesley W. Terpstra
d1151e2f0f tilelink2 Nodes: split connect into eager and lazy halves 2016-09-22 15:18:50 -07:00
Wesley W. Terpstra
684072023f tilelink2 Monitor: make it a LazyModule in the hierarchy 2016-09-22 15:14:20 -07:00
Wesley W. Terpstra
def497861b tilelink2 Bundles: add 1-way snoop bundles 2016-09-22 15:14:20 -07:00
Wesley W. Terpstra
69a1f8cd1f tilelink2 Monitor: detect if sources are mishandled 2016-09-22 15:14:19 -07:00
Henry Cook
83c08a931d [WIP] Generators for unittest and groundtest; disambiguate groundtest.TrafficGenerator 2016-09-22 14:57:18 -07:00
Henry Cook
47c5d1a992 [WIP] Move RocketTestSuite generation into RocketchipGenerator 2016-09-22 14:31:45 -07:00
Albert Ou
d76b762657 tilelink2 Fragmenter: Mask low bits of D channel addr_lo
This fixes an issue where passing addr_lo through unchanged triggered
unaligned address assertions in the Monitor.
2016-09-22 12:36:28 -07:00
Howard Mao
cd96a66ba6 replace verilog clock divider with one written in Chisel 2016-09-22 11:32:29 -07:00
Howard Mao
cbd702e48e make sure junctions and uncore unittests both run 2016-09-21 20:17:52 -07:00
Yunsup Lee
1b1ef3be07 simplify base Coreplex bundle 2016-09-21 18:29:28 -07:00
Yunsup Lee
d2df6397cd rename trc (tile reset clock) bundles to tcr (tile clock reset) 2016-09-21 18:29:28 -07:00
Yunsup Lee
5bb575ef74 rename internal/external MMIO network to cbus/pbus respectively 2016-09-21 18:29:28 -07:00
Henry Cook
64fe010369 [unittest] Config import tweaks 2016-09-21 17:40:39 -07:00
Henry Cook
fd5e00fed9 [coreplex] rename Testing.scala -> RocketTestSuite.scala 2016-09-21 17:35:39 -07:00
Henry Cook
270011b768 [unittest] more Config cleanup 2016-09-21 17:30:14 -07:00
Yunsup Lee
7afd630d3e add multiclock support to Coreplex 2016-09-21 16:55:26 -07:00
Andrew Waterman
8e63f4a1a5 Remove ClockToSignal and vice-versa
Clock.asUInt and Bool.asClock now suffice.
2016-09-21 16:17:14 -07:00
Henry Cook
335e866176 [unittest] Parallelize UnitTestSuite (#319)
* [unittest] Parallelize UnitTestSuite so all tests have their own timer, runs until all finish or any timeout. Adds SimpleTimer.

* [util] Timer spacing cleanup

* [unittest] Remove Config reference to UnitTestTimeout
2016-09-21 13:05:22 -07:00
Andrew Waterman
12d0c00822 Fix mtime RegField handling
RegField.bytes was unconditionally overwriting mtime, preventing it
from ever ticking.  Avoid RegField.bytes by splitting mtime into
a Seq of words.
2016-09-20 15:00:52 -07:00
Henry Cook
40f6f31611 [unittest] further refactor unittest framework 2016-09-20 14:14:30 -07:00
Henry Cook
ed91e9a89b Merge remote-tracking branch 'origin' into testharness-refactor 2016-09-20 13:03:21 -07:00
Henry Cook
b97a0947a9 [rocketchip] enable piecewise Generator output 2016-09-20 12:57:56 -07:00
Yunsup Lee
1a09e46f69 Merge branch 'master' into fix-addrmap-error-msg 2016-09-19 18:08:58 -07:00
Andrew Waterman
3b38736a8e Make BaseTopModule and BaseTopModule abstract
They aren't meant to be directly instantiated.
2016-09-19 17:18:35 -07:00
Andrew Waterman
d0572d6aab Allow reset vector to be set dynamically
A chip's power-up sequence, or awake-from-sleep sequence, may wish to
set the reset PC based upon dynamic properties, e.g., the settings of
external pins.  Support this by passing the reset vector to the Coreplex.
ExampleTop simply hard-wires the reset vector, as was the case before.

Additionally, allow MTVEC to *not* be reset.  In most cases, including
riscv-tests, pk, and bbl, overriding MTVEC is one of the first things
that the boot sequence does.  So the reset value is superfluous.
2016-09-19 17:18:03 -07:00
Andrew Waterman
e6c1bcfedd Expose carry-out bits from WideCounter 2016-09-19 15:54:17 -07:00
Yunsup Lee
1b26d78114 correctly print out the addrmap overlapping error message 2016-09-19 13:34:58 -07:00
Henry Cook
df442ed82c [rocketchip] avoid pending merge conflict] 2016-09-19 13:24:01 -07:00
Henry Cook
ddcf1b4099 Use PROJECT rather than MODEL in name of binary and generated src files. 2016-09-19 13:23:17 -07:00
Henry Cook
7b8aa6c839 [rocketchip] split out Base and Example tops 2016-09-19 11:00:13 -07:00
Andrew Waterman
a49814c667 Allow WideCounter to not be reset 2016-09-18 18:45:51 -07:00
Wesley W. Terpstra
9817a00ed9 tilelink2: Fuzzer should check address validity before injection 2016-09-17 17:07:21 -07:00
Wesley W. Terpstra
b11839f5a1 tilelink2: differentiate fast/safe address lookup cases 2016-09-17 17:04:18 -07:00
Wesley W. Terpstra
b4baae4214 tilelink2: minimize Xbar decode logic 2016-09-17 16:14:25 -07:00
Wesley W. Terpstra
76d8ed6a69 tilelink2: remove 'strided'; !contiguous is clearer 2016-09-17 16:14:25 -07:00
Wesley W. Terpstra
fa0f119f3c tilelink2: consider the implications of negative address mask 2016-09-17 16:14:22 -07:00
Wesley W. Terpstra
e437508548 tilelink2: track interrupt connectivity like in TL2 2016-09-17 14:43:48 -07:00
Wesley W. Terpstra
01c1886b9d Utils: cacheable only if there is a cache manager 2016-09-17 00:56:21 -07:00
Wesley W. Terpstra
6c3269a1d8 SRAM: optionally (default: true) executable 2016-09-17 00:19:37 -07:00
Wesley W. Terpstra
e749558190 ROM: optionally (default: true) executable 2016-09-17 00:19:09 -07:00
Wesley W. Terpstra
c70045b8b3 Utils: express cacheability from TL2 to TL1 2016-09-17 00:16:40 -07:00
Wesley W. Terpstra
e3d2bd3323 Top: print memory region properties, RWX [C] 2016-09-17 00:16:00 -07:00
Wesley W. Terpstra
5c858685aa Utils: support managers with multiple addresses 2016-09-16 18:03:49 -07:00
Richard Xia
3fdf40c088 Change implicit argument to explicit. 2016-09-16 17:47:31 -07:00
Wesley W. Terpstra
a9382b3116 Periphery: test bench looks for "testram" 2016-09-16 17:47:20 -07:00
Wesley W. Terpstra
b5ce6150c7 Periphery: dynamically create address map + config string for TL2 2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
8876d83640 Prci: preserve Andrew's preferred clint name 2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
a357c1d42e tilelink2: create DTS for devices automagically 2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
2587234838 tilelink2 TLNodes: capture nodePath in {Client,Manager}Parameters 2016-09-16 17:28:47 -07:00
Wesley W. Terpstra
915a929af1 tilelink2: Nodes can now mix context into parameters 2016-09-16 17:28:47 -07:00
Richard Xia
63f13ae7ce Merge remote-tracking branch 'origin/master' into rxia-testharness-refactor 2016-09-16 17:10:52 -07:00
Wesley W. Terpstra
dae0918c85 tilelink2 RegisterRouter: support undefZero 2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
f0f553f227 tilelink2 RegisterRouterTest: work around firrtl warning
Using io.wready leads to verilog that reads from the output...

Lint-[PCTIO-L] Ports coerced to inout
/scratch/terpstra/federation/rocket-chip/vsim/generated-src/UnitTestHarness.UnitTestConfig.v, 24860
"io_wready"
  Port "io_wready" declared as output in module "RRTestCombinational_29" may
  need to be inout. Coercing to inout.
2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
3fcc1a4460 tilelink2 RegisterRouterTest: don't couple fire into helpers 2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
2210e71f42 tilelink2 AddressDecoder: validate output of optimization 2016-09-16 16:09:00 -07:00
Wesley W. Terpstra
023a54f122 tilelink2 AddressDecoder: improved heuristic 2016-09-16 16:09:00 -07:00
Andrew Waterman
86b70c8c59 Rename PRCI to CoreplexLocalInterrupter
That's all it's doing (there wasn't much PRC).
2016-09-16 14:26:34 -07:00
Wesley W. Terpstra
4b1de82c1d RegField: separate UInt=>bytes and bytes=>regs 2016-09-16 14:24:28 -07:00
Wesley W. Terpstra
943c36954d tilelink2 RegField: .bytes should update more than one byte! 2016-09-16 14:24:24 -07:00
Andrew Waterman
6134384da4 Fix deprecation warnings 2016-09-16 14:24:19 -07:00
mwachs5
a031686763 util: Do BlackBox Async Set/Reset Registers more properly (#305)
* util: Do Set/Reset Async Registers more properly

The way BlackBox "init" registers were coded before was
not really kosher verilog for most synthesis tools.
Also, the enable logic wasn't really pushed down into the flop.

This change is more explicit about set/reset flops,
again this is only a 'temporary' problem that would go away
with parameterizable blackboxes (or general async reset support).

* Tabs, not spaces, in Makefiles

* util: Fix typos in Async BB Reg Comments
2016-09-16 13:50:09 -07:00
Andrew Waterman
a94b4af92d Simplify AsyncResetRegVec and make AsyncResetReg companion object 2016-09-16 11:25:10 -07:00
Wesley W. Terpstra
dd19e0911e tilelink2: handle bus width=1 2016-09-15 22:15:11 -07:00
Wesley W. Terpstra
e1d7f6d7df PRCI: always use bus width >= XLen 2016-09-15 22:15:07 -07:00
Wesley W. Terpstra
0e80f7fd0f HintHandler: don't violate Irrevocable rules 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
f05222a072 testconfigs: disable atomics until AtomicAbsorber finished 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
38a9421c75 Comparator: don't compare addr_beat when it's irrelevant 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
669e3b0d96 Regression: fix-up address lookup 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
30fa4ea956 RegisterRouter: compress register mapping for sparse devices 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
6b1c57aedc tilelink2: compute minimal decisive mask 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
fb24e847fd rocketchip: globals are for sissies 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
644f8fe974 rocketchip: switch to TL2 mmio + port PRCI 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
91e7da4de3 tilelink2: make RegisterRouter constructor args public 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
3875e11b26 tilelink2: RegField splits up big registers 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
5c8e52ca32 devices: TL2 version of ROM 2016-09-15 21:28:56 -07:00
Wesley W. Terpstra
3f30e11f16 tilelink2: Legacy, manager_xact_id does not matter for uncached 2016-09-15 21:28:55 -07:00
Wesley W. Terpstra
ddd93871d8 tilelink2: add an executable manager parameter 2016-09-15 21:28:55 -07:00
Wesley W. Terpstra
9442958d67 tilelink2: allow := on nodes outside the tilelink2 package 2016-09-15 21:28:55 -07:00
Jack Koenig
f2fe437fa4 Use CDEMatchError for improved performance (#304) 2016-09-15 19:47:18 -07:00
Henry Cook
851a336db4 [unittest] split out Config and TestHarness into separate files, minimize imports 2016-09-15 14:25:47 -07:00
Henry Cook
245f8ab76b [util] move LatencyPipe into util 2016-09-15 13:30:34 -07:00
Henry Cook
a70d8c9821 Merge remote-tracking branch 'origin/master' into testharness-refactor 2016-09-15 13:27:07 -07:00
Henry Cook
be9ddae77f make groundtest and unitest peers of rocketchip, with their own packages, harnesses and configs 2016-09-15 13:04:01 -07:00
Henry Cook
c6f252a913 Remove Option from success flag in coreplex; just use a sane default. 2016-09-15 12:19:22 -07:00
Henry Cook
888f6a2a55 Revert "move UnitTest back into rocketchip module"
This reverts commit f95b8c4ec2.
2016-09-15 11:48:09 -07:00
Henry Cook
0a65238920 Merge branch 'master' into tl2-irrevocable 2016-09-15 10:30:50 -07:00
Howard Mao
49863944c4 merge ClientTileLinkEnqueuer and ClientUncachedTileLinkEnqueuer objects into TileLinkEnqueuer 2016-09-14 21:36:27 -07:00
Howard Mao
f363f5f709 wrap TestHarness latency pipe in module 2016-09-14 21:16:54 -07:00
Howard Mao
f5db83a72f NTiles should not be a Knob 2016-09-14 21:16:54 -07:00
Howard Mao
646527c88e use named constants to set AXI resp, cache, and prot fields 2016-09-14 21:16:54 -07:00
Howard Mao
f95b8c4ec2 move UnitTest back into rocketchip module 2016-09-14 20:51:56 -07:00
Henry Cook
cde104b3fa [junctions] Removes the obsoleted SMI.
Closes #280.
2016-09-14 20:06:22 -07:00
Henry Cook
ab3814dcee Merge branch 'master' into tl2-irrevocable 2016-09-14 19:00:17 -07:00
Yunsup Lee
e404bea2ee Merge branch 'master' into move-bootrom 2016-09-14 18:58:48 -07:00
Wesley W. Terpstra
1c7d7f9d32 tilelink2 RegisterRouterTest: stall on both edges 2016-09-14 18:22:12 -07:00
Yunsup Lee
97809b183f refactor unittest framework
as a result, there's another SUITE that needs to run
2016-09-14 18:10:21 -07:00
Henry Cook
d35060b881 [junctions] messed up the merge lulz 2016-09-14 17:55:16 -07:00
Henry Cook
1b53e477fa Merge branch 'master' of github.com:ucb-bar/rocket-chip into tl2-irrevocable 2016-09-14 17:50:17 -07:00
Henry Cook
e02d149cbe [tilelink2] Convert TileLink2 to use IrrevocableIO. Add checks to the Monitor to enforce Irrevocable semantics on TLEdges. Update the RegisterRouterTests to pass the new Monitor assertions. 2016-09-14 17:43:07 -07:00
Henry Cook
08c4c7b985 [junctions] make async crossings capable of providing IrrevocableIO 2016-09-14 17:38:54 -07:00
Megan Wachs
1308680f75 Add some async/clock utilities 2016-09-14 16:30:59 -07:00
Yunsup Lee
710f1ec020 Move BootROM from Coreplex to Periphery 2016-09-14 16:09:59 -07:00
Henry Cook
aa3fa90fe3 [tilelink2] Monitor: miscopied name in assert message 2016-09-14 14:56:50 -07:00
Henry Cook
d76e19a6ab [tilelink2] Monitor: simplify monitor interface. EdgeIn and EdgeOut are required to be the same, so why pass around both? 2016-09-14 14:23:23 -07:00
Andrew Waterman
565444c40e Make UnitTestCoreplex cope with an external MMIO network 2016-09-14 12:19:21 -07:00
Andrew Waterman
5828e6042e Work around https://github.com/ucb-bar/firrtl/issues/299 2016-09-14 11:47:10 -07:00
Andrew Waterman
c3ddff809b Move PRCI from Coreplex to always-on block, where it belongs 2016-09-14 11:01:05 -07:00
Andrew Waterman
5566bf1b13 Don't route PLIC interrupts through PRCI
The PLIC is local to the Coreplex, and PRCI should not be.
2016-09-14 11:01:05 -07:00
mwachs5
47acbf928b Give AsyncCrossing slave interfaces registers visibility into when they were written (#288) 2016-09-14 00:17:26 -07:00
Howard Mao
bdb7b1de36 move tilelink-agnostic counters from uncore to util package 2016-09-13 20:47:05 -07:00
Howard Mao
1882241493 move junctions utils into top-level utils package 2016-09-13 20:47:04 -07:00
Henry Cook
7dd4492abb First cut at refactoring unittests into a top-level utility. Individual tests co-located with their DUT. No functional changes. 2016-09-13 20:30:14 -07:00
Wesley W. Terpstra
d23ab7370d tilelink2: Unit Test for the RegisterCrossing 2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
cc88bf1b08 junctions: give unit tests more time 2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
acedd3688a tilelink2: unit test for the clock crossing 2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
c8e6d47884 tilelink2: add a clock crossing adapter 2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
44501cdbf8 crossings: change defaults to sync=3 for safer settling time
Make the matching AsyncQueue depth=8 to support full throughput
2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
3348236320 junctions: remove obsolete Handshaker crossing 2016-09-13 18:33:56 -07:00
Wesley W. Terpstra
fe6a67dd0e tilelink2: add a RegisterCrossing primitive 2016-09-13 18:33:53 -07:00
Wesley W. Terpstra
d75f9d6a34 junctions: add an AsyncQueue 2016-09-13 17:38:18 -07:00
Wesley W. Terpstra
8142406d2e junctions: refactor the Crossing type 2016-09-13 15:51:18 -07:00
Wesley W. Terpstra
ecdfb528c5 crossing: refactor AsyncDecoupled to provide AsyncDecoupledCrossing with no clock domain 2016-09-13 15:51:18 -07:00
Wesley W. Terpstra
33a05786db tilelink2 RAMModel: fix put, get, putAck, getAck case (#282)
This case should result in undefined data for the Get.
It was previously requiring the Get to return the new Put data,
which is only guaranteed by a FIFO device.
2016-09-13 15:44:36 -07:00
Henry Cook
632b5896b9 Delete TestGraphs.scala
Re-do later using Fuzzer
2016-09-13 13:29:48 -07:00
Henry Cook
e318c29d48 [tilelink2] Fuzzer: Allow noise-making to be parameterized. Better comments. 2016-09-13 12:25:57 -07:00
Henry Cook
05100c12a7 Merge branch 'master' of github.com:ucb-bar/rocket-chip into monitor 2016-09-13 11:18:18 -07:00
Andrew Waterman
61cbe6164d Add option to execute JAL from decode stage
This is particularly helpful for designs that don't have a BTB, but
it becomes the critical path for designs with RVC.  Caveat emptor.
2016-09-13 02:32:00 -07:00
Wesley W. Terpstra
606f19a17f tilelink2: RegisterRouter Unit Test 2016-09-12 22:13:39 -07:00
Wesley W. Terpstra
7005422651 tilelink2 HintHandler: don't HintAck in the middle of a multibeat op 2016-09-12 19:06:35 -07:00
Wesley W. Terpstra
273d3a73f2 tilelink2: Unit Test passes! 2016-09-12 18:39:50 -07:00
Wesley W. Terpstra
9874bc553a tilelink2: Fragmenter supports Hints 2016-09-12 17:31:59 -07:00
Wesley W. Terpstra
42955a0490 tilelink2: HintHandler optimize to nothing if unneeded 2016-09-12 17:31:16 -07:00
Wesley W. Terpstra
94761f714d tilelink2 HintHandler: fill in correct sink in responses 2016-09-12 17:26:40 -07:00
Wesley W. Terpstra
ca5f98f138 tilelink2: Hints are not special
Hints have a TransferSize limit just like all other message types.
2016-09-12 17:15:28 -07:00
Henry Cook
ad8e563c89 [tilelink2] Fuzzer: Rewrite of fuzzer
Multiple bug-fixes and actual source id generation.
2016-09-12 17:00:58 -07:00
Henry Cook
0b0c891179 [tilelink2] Monitor: Allow zero-mask PutPartials
this will require a larger address refactoring TBD
2016-09-12 17:00:50 -07:00
Henry Cook
c57b52ec86 tilelink2 Fragmenter: bugfix using D.hasData 2016-09-12 16:58:21 -07:00
Henry Cook
82681179cb [tilelink2] Edges: add size to addr_lo.
addr_lo cannot correctly be deciphered from the mask alone.
OxC still has addr_lo === 0 if size is >1.
2016-09-12 16:58:09 -07:00
Andrew Waterman
88440ebf89 Use PseudoLRU in BTB when possible (for powers of two) 2016-09-12 16:52:03 -07:00
Andrew Waterman
266a2f24bd Disable Mul early out by default if XLen == 32
With a default unroll of 8, it doesn't help performance, but costs area.
2016-09-12 16:50:08 -07:00
Andrew Waterman
96185e4b16 tighten an assert condition
dcache.s1_kill is a don't-care if dcache.req.valid wasn't previously high
2016-09-12 16:49:46 -07:00
Andrew Waterman
beb141a20b Allow M, A, D, C extensions to be disabled in misa register 2016-09-12 16:49:46 -07:00
Howard Mao
f3cdeb08c6 pass nMemChannels to coreplex through CoreplexConfig 2016-09-12 12:40:10 -07:00
Howard Mao
9d9f90646d allow configuration of simulation memory latency 2016-09-12 12:33:50 -07:00
Henry Cook
a21b04a7c1 playground for making different DAGs to use as DUTs 2016-09-12 10:32:45 -07:00
Henry Cook
0671d5d637 Initial version of fuzzer and simple ram fuzz test 2016-09-12 10:32:45 -07:00
Wesley W. Terpstra
7760459b76 tilelink2 RegisterRouter: add RegField test patterns 2016-09-12 10:32:25 -07:00
Wesley W. Terpstra
85ae77c108 tilelink2 RAMModule: carefully stage the pipeline to make BRAMs possible 2016-09-12 10:32:25 -07:00
Wesley W. Terpstra
9560df537c tilelink2 RegisterRouter: allow sub-4k devices in order to make useful unit tests 2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
26f9e2dfbd tilelink2 Parameters: fix width=1 address truncation bug 2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
98a4facac7 tilelink2 RAMModel: clear Mems on power-up 2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
17f7ab18de tilelink2 RAMModel: model the state a RAM would have for Put+Gets 2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
488b93d146 tilelink2 Parameters: if you support PutPartial, you must support PutFull 2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
d6261e8ce8 tilelink2 Edge: add a numBeats1 method for predecremented code 2016-09-12 10:32:24 -07:00
Wesley W. Terpstra
5604049927 tilelink2 Buffer: support an unlimited number of channels 2016-09-12 10:32:24 -07:00
Yunsup Lee
d985cdfc66 Merge branch 'master' into refactor-periphery 2016-09-10 23:42:13 -07:00
Yunsup Lee
fea31c7061 let GlobalAddrMap and ConfigString overridable 2016-09-10 23:39:44 -07:00
Yunsup Lee
bb3f514e8d now able to add periphery devices through traits
Unfortunately, I had to touch a lot of code, which weren't quite possible to split up into multiple commits.
This commit gets rid of the "extra" infrastructure to add periphery devices into Top.
2016-09-10 23:39:29 -07:00
Megan Wachs
77e4aa63f8 Get rid of the unecessary Parameters for Async Reset Reg 2016-09-09 16:24:35 -07:00
Andrew Waterman
b695ab5292 Merge branch 'master' into tweaks 2016-09-09 15:04:21 -07:00
Megan Wachs
5f5989848c Merge remote-tracking branch 'origin/master' into black_box_regs 2016-09-09 13:12:52 -07:00
Andrew Waterman
656aa78f7d Pipeline FMAs more deeply by default
Rocket's QoR has improved enough that the FMAs are on the critical
path.  This change seems to keep the integer pipeline's logic
paths balanced with the FPU.
2016-09-09 11:06:42 -07:00
Andrew Waterman
eaa4b04ee5 Check D$ store->load collisions more precisely
Tolerate, for example, a half-word store and a half-word load to
different halves of the same word.
2016-09-09 11:06:42 -07:00
Wesley W. Terpstra
c28ca37944 tilelink2: get rid of fragile implicit lazyModule pattern, and support :=
We can more reliably find the current LazyModule from the LazyModule.stack
2016-09-08 23:06:59 -07:00
Wesley W. Terpstra
b587a409a3 tilelink2 Node: make it possible for {Identity,Output,Input}Node to pass a Vec
In order to implement a pass-through RAM Monitor model, we will want to support
a variable number of inputs and outputs with BOTH different manager and client
parameters on each bundle.
2016-09-08 21:34:20 -07:00
Wesley W. Terpstra
48ca478578 Merge branch 'master' into intbar 2016-09-08 21:09:59 -07:00
Wesley W. Terpstra
808a7f60f4 tilelink2 Legacy: it's only an error if it's valid (#264) 2016-09-08 21:09:40 -07:00
Megan Wachs
fda4c2bd76 Add a way to create Async Reset Registers and a way to easily access them with TL2 2016-09-08 20:02:07 -07:00
Megan Wachs
c1eb1f12a2 tilelink2: Rename GPIO to Example to avoid conflicts with real GPIO devices 2016-09-08 20:02:07 -07:00
Wesley W. Terpstra
cbf0670156 tilelink2 Legacy: it's only an error if it's valid 2016-09-08 19:32:00 -07:00
Wesley W. Terpstra
1b07d53f70 tilelink2 IntNodes: record interrupt ranges in parameters 2016-09-08 18:51:43 -07:00
Wesley W. Terpstra
66f58cf2d0 tilelink2 RegisterRouter: support new TL2 interrupts 2016-09-08 15:25:50 -07:00
Wesley W. Terpstra
23e896ed5d tilelink2 IntNodes: support interrupt graphs 2016-09-08 15:25:48 -07:00
Wesley W. Terpstra
d7df7d3109 tilelink2: connect Nodes to LazyModules for better error messages 2016-09-08 15:24:04 -07:00
Wesley W. Terpstra
53987cd9d4 tilelink2 Nodes: support non-Bundle data for io type 2016-09-08 15:19:12 -07:00
Wesley W. Terpstra
60a503dc2f tilelink2 RegField: add a w1ToClear RegField 2016-09-08 14:02:49 -07:00
Wesley W. Terpstra
99b7e734cd tilelink2 Bundles: fix wrong sink width! 2016-09-08 13:47:40 -07:00
Wesley W. Terpstra
9bfd8c1cf5 TL2 WidthWidget (#258)
* tilelink2 Narrower: support widenening and narrowing on all channels

Be extra careful with the mask transformations

We need to make sure that narrowing or widening do not cause a loss
of information about the operation. The addr_hi+(mask|addr_lo) conversions
are now 1-1, except on D, which should not matter.

* tilelink2 SRAM: work around firrtl SeqMem bug

* tilelink2 WidthWidget: renamed from Narrower (it now converts both ways)

* tilelink2 mask: fix an issue with width=1 data buses
2016-09-08 10:38:38 -07:00
Yunsup Lee
2c000a99da compartmentalize Top into periphery traits 2016-09-08 02:08:57 -07:00
Yunsup Lee
e35e7b2ee3 Fix routing in non-contiguous MMIO regions
This is a temporary fix, which can generate more hardware than necessary, but this is OK for now, since this code will soon be replaced with tilelink2 code.
2016-09-07 19:28:12 -07:00
Andrew Waterman
7603b86239 Merge branch 'master' into use-companion 2016-09-07 12:56:55 -07:00
Colin Schmidt
254f49093c only use companion objects for types 2016-09-07 12:32:34 -07:00
Andrew Waterman
23d0b31615 Merge branch 'master' into tilelink2.2 2016-09-07 11:47:50 -07:00
Andrew Waterman
02a2439222 Support a degenerate PLIC with no interrupts
Resolves #249
2016-09-07 11:21:13 -07:00
Andrew Waterman
70cfd7ce13 Make DefaultRV32Config be RV32IMAFCS, not RV32IMC
The latter is more the domain of TinyConfig.
2016-09-07 01:58:25 -07:00
Andrew Waterman
a7f47f3c23 Reduce default BTB size
The old value 62 seems to have been a typo introduced over 2 years ago
in commit 63bd0b9d2a.  The intent was to
fit the dhrystone working set (rofl) which the new value of 40 does.
2016-09-07 01:51:27 -07:00
Andrew Waterman
9fea4c83da Add RV32F support 2016-09-07 00:05:39 -07:00
Andrew Waterman
66e9f027e0 Add MuxT to mux on Tuple2 and Tuple3 2016-09-07 00:05:38 -07:00
Andrew Waterman
511cc6c5c5 Evaluate arg to Boolean.option lazily 2016-09-07 00:05:38 -07:00
Andrew Waterman
a0dcd42e80 avoid erroneously setting tags valid during flush 2016-09-07 00:05:38 -07:00
Yunsup Lee
fb05f5a07f remove parameter ExtIOAddrMapEntries (#250)
with the AddrMap ordering constraint relaxed, this parameter is no longer needed.
2016-09-07 00:05:00 -07:00
Wesley W. Terpstra
d2421654c4 tilelink2: refactor address into addr_hi on ABC and addr_lo on CD
We need addr_lo in order to properly convert widths.
As part of the refactoring, move all methods out of the Bundles
2016-09-06 23:46:44 -07:00
Yunsup Lee
b76612f357 relax contraint on adding AddrMapEntry to AddrMap (#248)
now you can add them in any order.  there's an explicit check at the end to figure out whether there are overlapping regions.
2016-09-06 21:53:55 -07:00
Wesley W. Terpstra
aae4230627 tilelink2: fix bugs found by Megan in Legacy converter 2016-09-06 13:12:33 -07:00
Yunsup Lee
56d81b0034 fix configstring printout with no memory 2016-09-06 10:40:11 -07:00
Wesley W. Terpstra
54ab14cd9d tilelink2: statically optimize numBeats for simple managers 2016-09-05 22:11:03 -07:00
Wesley W. Terpstra
314d6ebd6f tilelink2: stricter TransferSizes requirements 2016-09-05 22:10:28 -07:00
Wesley W. Terpstra
56170c605c tilelink2: be more forgiving in what Legacy TL requires 2016-09-05 21:12:51 -07:00
Wesley W. Terpstra
3167539331 tilelink2: Narrower must be little-endian 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
ded246fb95 tilelink2: relax max transfer size; the real requirement is not exceeding alignment 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
cf0291061d tilelink2: fix a bug in UIntToOH1 triggered if the size was too big 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
9f45212c95 tilelink2: Fragmenter needs to update subaddress 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
757d46279e tilelink2: expand data correctly in D channel narrower 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
0faa8c4051 tilelink2: fix Xbar bug where Mux1H broke FSM if only one manager 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
a0c25880c7 tilelink2: Monitor should check mask of reconstructed request 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
df32cc3887 tilelink2: be careful; apply Andrew's masking trick everywhere 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
fb262558ee tilelink2: helper objects should pass source line from where they were invoked 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
1a081b4dd5 tilelink2: Monitor should report which TL connection was the problem 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
cb54df0a8a tilelink2: tie off unused channels 2016-09-05 20:58:41 -07:00
Wesley W. Terpstra
68e64a9859 tilelink2: clarify ready-valid use of RegisterRouter 2016-09-05 20:58:40 -07:00
Wesley W. Terpstra
e3b3543841 tilelink2: ensure RegFields don't exceed their bounds 2016-09-05 20:58:40 -07:00
Wesley W. Terpstra
8343070639 tilelink2: detect 1-bit overflow in register definitions 2016-09-05 20:58:40 -07:00
Wesley W. Terpstra
a1fc01fd6d tilelink2: prevent mapping the same register twice 2016-09-05 20:58:40 -07:00
Wesley W. Terpstra
81162a2dc9 tilelink2: support attaching a DecoupledIO directly to a register 2016-09-05 20:58:40 -07:00
Wesley W. Terpstra
6a378e79e3 tilelink2: allow 0-stage backpressure in combinational regmap 2016-09-05 20:58:40 -07:00
Wesley W. Terpstra
4746cf00ce tilelink2: move files to new uncore directory 2016-09-05 20:58:40 -07:00
Howard Mao
a7f79aa409 get rid of TileLinkMemorySelector 2016-09-04 10:55:19 -07:00
Howard Mao
f0ab6d0214 tie off finish signals in tilelink wrapper and unwrapper 2016-09-04 10:55:19 -07:00
Howard Mao
66de89c4db allow fixed priority routing in Junctions arbiters 2016-09-04 10:55:19 -07:00
Howard Mao
efe8670283 allow Serializer/Deserializer to work with arbitrary Chisel data types 2016-09-04 10:55:19 -07:00
Howard Mao
b9b79e4fb6 get rid of AtoS RTL 2016-09-04 10:55:19 -07:00
Howard Mao
f34843f1b9 fix assignment of incoherent vector 2016-09-04 10:12:16 -07:00
Yunsup Lee
a4c1942958 flatten Coreplex module hierarchy 2016-09-02 17:45:08 -07:00
Andrew Waterman
63679bb019 Add support for L1 data scratchpads instead of caches
They fit in the same part of the address space as DRAM would be, and
are coherent (because they are not cacheable).

They are currently limited to single cores without DRAM.  We intend
to lift both restrictions, probably when we add support for
heterogeneous tiles.
2016-09-02 16:22:07 -07:00
Jim Lawson
dc9ae19936 Work-around for current Scala compiler "structural type loses implicits".
Running rocket-chip through the chisel3 gsdt branch which supports stricter connection checks and uses implicit definitions to deal with "old" direction overrides, exposed a possible bug in the Scala compiler.

    [error] .../src/main/scala/uncore/devices/Prci.scala:27: value asOutput is not a member of uncore.devices.PRCIInterrupts{val mtip: chisel3.core.Bool; val msip: chisel3.core.Bool}
    [error] possible cause: maybe a semicolon is missing before `value asOutput'?
    [error]   }.asOutput
    [error]     ^
    [error] one error found
    [error] (uncore/compile:compileIncremental) Compilation failed

This change isn't strictly required for current chisel3 code, but is being submitted in anticipation of an eventual merge of the gsdt branch prior to a compiler fix.
2016-09-02 15:38:18 -07:00
Andrew Waterman
fb50f7c9dd Set default TileLink width to XLen 2016-09-02 15:27:54 -07:00
Andrew Waterman
e23e4d6de5 Add ClientUncachedTileLinkEnqueuer utility 2016-09-02 15:27:54 -07:00
Andrew Waterman
7aeb42fa55 Allow narrow TL interface on PRCI; make mtime writable 2016-09-02 15:27:54 -07:00
Andrew Waterman
6872000f5e Merge pull request #239 from ucb-bar/move_rtc
Move RTC
2016-09-02 15:17:49 -07:00
Megan Wachs
af364bc7bc Rename RTC to RTCTick to clarify that it needs to be a Boolean signal, not a Clock type signal 2016-09-02 15:14:39 -07:00
Megan Wachs
8163a6b597 Make it easier to override the 'placeholder' Real-Time-Clock, to allow more real-world applications 2016-09-02 11:11:40 -07:00
Andrew Waterman
c05ba1e864 Add TileId parameter, generalizing GroundTestId
This usually shouldn't be used in Tiles that are meant to be P&R'd once
and multiply instantiated, as their RTL would no longer be homogeneous.
However, it is useful for conditionalizing RTL generation for
heterogeneous tiles.
2016-09-02 00:10:50 -07:00
Yunsup Lee
4a7972be31 connect testharness components via member functions (#236)
to prevent code duplication for new testbenches
2016-09-01 18:38:39 -07:00
Howard Mao
c66318307c no longer need to set invalidate_lr in RoCC examples 2016-08-31 22:05:35 -07:00
Howard Mao
27c674972c tie off invalidate_lr in RoCC 2016-08-31 22:00:27 -07:00
Howard Mao
bb578494d8 don't override req.bits.phys in SimpleHellaCacheIF 2016-08-31 22:00:27 -07:00
Howard Mao
50d6738caf make sure DummyPTW sets all the necessary status and ptbr signals 2016-08-31 22:00:27 -07:00
Howard Mao
403cc1c5c4 fix DecoupledTLB to handle misses appropriately 2016-08-31 22:00:27 -07:00
Andrew Waterman
f4524e4c91 Add PML for Boolean.option; use it 2016-08-31 13:43:04 -07:00
SeungRyeol Lee
b1ce3b8c98 Add address map entries for exported mmio port. 2016-08-31 06:58:38 +09:00
Andrew Waterman
8dbee2b133 Don't conditionalize running bmarks on UseVM 2016-08-29 13:43:29 -07:00
Andrew Waterman
07d48df88a Get rid of FPU RoCC port logic when RoCC not present
The previous approach used ex_reg_valid to determine whether to
source data from the FPU or RoCC.  Thus, when the RoCC was not
present, it was still creating muxes.  Using ex_cp_valid instead
gets rid of them.
2016-08-29 12:59:17 -07:00
Andrew Waterman
f91552a650 Add performance counter support 2016-08-29 12:31:52 -07:00
Andrew Waterman
1e3339e97c Update breakpoints to match @timsifive's debug spec 2016-08-29 12:31:52 -07:00
Andrew Waterman
9ca82dd397 reset default MulDiv config to moderately fast default
Closes #228.

In commit 3f8c60bbd6 I inadvertently
changed the configuration while refactoring it.
2016-08-29 12:31:52 -07:00
Andrew Waterman
33eaf08b60 set missing port direction
Ideally, chisel should flag this as an error.
2016-08-29 12:31:52 -07:00
Megan Wachs
53ee54dbd1 Incorporate feedback to make the NExtPerhipheryInterrupts come from DeviceBlock itself 2016-08-26 10:40:39 -07:00
Megan Wachs
41aa80c5d7 Merge remote-tracking branch 'origin/master' into coreplex_peripheral_interrupts 2016-08-26 09:32:36 -07:00
Ben Keller
79293f4fa2 Use a better iterator inside the DCache 2016-08-25 20:41:39 -07:00
Henry Cook
115e8edd83 Merge branch 'master' into coreplex_peripheral_interrupts 2016-08-25 17:26:56 -07:00
Henry Cook
93c801f598 Streamline the Generator App and associated utilities. Remove deprecated call to chiselMain and useless Chisel2 args. Update arguments to sbt run. (#227) 2016-08-25 17:26:28 -07:00
Megan Wachs
428eed79a1 Allow some External Interrupts to come from Periphery 2016-08-25 14:16:33 -07:00
Megan Wachs
32118269c1 Remove } introduced in merge 2016-08-23 08:20:52 -07:00
Megan Wachs
9974626d6a Merge remote-tracking branch 'origin/master' into HEAD
Conflicts:
	src/main/scala/rocketchip/TestHarness.scala
2016-08-23 07:34:01 -07:00
Howard Mao
61aa716f44 fix bus axi connections in periphery 2016-08-22 11:57:15 -07:00
Howard Mao
f9ea14b4c2 extra devices should get elaborated in a single build function 2016-08-22 11:57:15 -07:00
Scott Johnson
96e2cefb34 Merge branch 'master' into HEAD 2016-08-22 11:37:30 -07:00
mwachs5
22ffe36258 Add a queue for timing QoR between L2->MMIO network (#217) 2016-08-19 22:51:49 -07:00
Megan Wachs
75efc7dee7 JtagIO's DRV_TDO should be an INPUT 2016-08-19 16:38:03 -07:00
Megan Wachs
723cc063cb Move files after the file reorganization 2016-08-19 16:11:41 -07:00
Megan Wachs
3dd51ff734 This commit adds Logic & test support for JTAG implementation of Debug Transport Module.
- The DebugTransportModuleJtag is written in Verilog. It probably could be written in
  Chisel except for some negative edge clocking requirement.
- For real implementations, the AsyncDebugBusTo/From is insufficient. This commit
  includes cases where they are used, but because they are not reset asynchronously,
  a Verilog 'AsyncMailbox' is used when p(AsyncDebug) is false.
- This commit differs significantly from the earlier attempt. Now, the
  DTM and synchronizer is instantiated within Top, as it is a real piece of
  hardware (vs. test infrastructure).
-TestHarness takes a parameter vs. creating an entirely new TestHarness class.
It does not make sense to instantiate TestHarness when p(IncludeJtagDTM) is false,
and it would not make sense to insantiate some other TestHarness if p(IncludeJtagDTM)
is true.

To build Verilog which includes the JtagDTM within Top:

make CONFIG=WithJtagDTM_...

To test using gdb->OpenOCD->jtag_vpi->Verilog:

First, install openocd (included in this commit)

./bootstrap
./configure --prefix=$OPENOCD --enable-jtag-vpi
make
make install

Then to run a simulation:

On a 32-bit core:

$(ROCKETCHIP)/riscv-tools/riscv-tests/debug/gdbserver.py \
  --run ./simv-TestHarness-WithJtagDTM_... \
  --cmd="$OPENOCD/bin/openocd --s $OPENOCD/share/openocd/scripts/" \
  --freedom-e300-sim \
  SimpleRegisterTest.test_s0

On a 64-bit core:

$(ROCKETCHIP)/riscv-tools/riscv-tests/debug/gdbserver.py \
  --run ./simv-TestHarness-WithJtagDTM_... \
  --cmd="$OPENOCD/bin/openocd --s $OPENOCD/share/openocd/scripts/" \
  --freedom-u500-sim \
  SimpleRegisterTest.test_s0
2016-08-19 16:08:31 -07:00
Megan Wachs
dd4a50c452 Add JTAG DTM and test support in simulation
Initial cut

checkpoint which compiles and runs but there is some off-by-1 in the protocol

Debugging the clock crossing logic

checkpoint which works

Clean up the AsyncMailbox black box
2016-08-19 16:08:17 -07:00
Howard Mao
f4e0e0966c move rocketchip package sources into its own subdirectory 2016-08-19 13:45:23 -07:00
Howard Mao
7b20609d4d reorganize moving non-submodule packages into src/main/scala 2016-08-19 13:45:23 -07:00
Andrew Waterman
114226252b Hierarchicalize D$ config 2016-08-19 12:12:34 -07:00
Andrew Waterman
3f8c60bbd6 Hierarchicalize FPU and MulDiv parameters
This gets some leaf-level parameters out of the global parameterization,
better separating concerns.  This commit also allows disabling the
M extension.
2016-08-19 12:06:17 -07:00
Colin Schmidt
0a6c05a5d8 connect top level interrupts to coreplex 2016-08-18 15:52:44 -07:00
Howard Mao
91a97d6773 add some more comments to describe the new device system 2016-08-18 15:06:55 -07:00
Howard Mao
1b6fa70b5c Add test for external TL clients (bus mastering) 2016-08-18 14:26:03 -07:00
Howard Mao
18982d7351 add default addrMapEntry definition which throws exception 2016-08-18 12:29:41 -07:00
Howard Mao
f7c42499bb allow ExtraDevices to have client ports as well as MMIO ports 2016-08-18 12:18:14 -07:00
Howard Mao
d771f37e7e rename BusPorts to ExternalClients 2016-08-18 10:54:24 -07:00
Howard Mao
10190197c3 allow coreplex to take in more than 1 bus port 2016-08-18 10:35:25 -07:00
David Biancolin
29600f64ec make memsize configurable 2016-08-17 16:31:34 -07:00
Andrew Waterman
ed827678ac Write test harness in Chisel
This is an unavoidably invasive commit, because it affects the unit tests
(which formerly exited using stop()), the test harness Verilog generator
(since it is no longer necessary), and the DRAM model (since it is no
longer connected).  However, this should substantially reduce the effort
of building test harnesses in the future, since manual or semi-automatic
Verilog writing should no longer be necessary.  Furthermore, there is now
very little duplication of effort between the Verilator and VCS test
harnesses.

This commit removes support for DRAMsim, which is a bit of an unfortunate
consequence.  The main blocker is the lack of Verilog parameterization for
BlackBox.  It would be straightforward to revive DRAMsim once support for
that feature is added to Chisel and FIRRTL.  But that might not even be
necessary, as we move towards synthesizable DRAM models and FAME-1
transformations.
2016-08-15 23:27:27 -07:00
Howard Mao
47a0c880a4 make sure TLId set in Periphery 2016-08-15 13:58:23 -07:00
Howard Mao
e939af88aa explicitly set TLId for bus TL ports 2016-08-15 12:46:29 -07:00
Howard Mao
2c39f039b5 make external address map order overrideable 2016-08-15 11:40:28 -07:00
Howard Mao
fb476d193c refactor main App for better code re-use 2016-08-11 16:15:23 -07:00
Howard Mao
e0ae039235 fix config string generation for extra devices 2016-08-11 10:44:32 -07:00
Howard Mao
647dbefd9b split coreplex off into separate package 2016-08-10 18:04:22 -07:00
Howard Mao
4bfa7ceb6a unit tests in Coreplex instead of Tile 2016-08-10 11:26:14 -07:00
Howard Mao
0ee1ce4366 separate Coreplex and TopLevel parameter traits 2016-08-10 09:49:56 -07:00
Howard Mao
f95d319162 don't use secondary external address map; collapse submap instead 2016-08-09 22:29:38 -07:00
Howard Mao
2645f74af2 clean up addrmap flatten function 2016-08-09 22:14:32 -07:00
Howard Mao
33f13d5c49 don't repeat external addr map base 2016-08-09 21:20:54 -07:00
Howard Mao
3ea2f4a6c4 refactor top-level into coreplex and platform 2016-08-09 18:26:52 -07:00
Howard Mao
dd1fed41b6 generate BootROM contents from assembly code 2016-08-05 16:39:21 -07:00
Howard Mao
9fa5b228b2 allow extra devices and top-level ports to be added without changing RocketChip.scala 2016-08-04 14:06:14 -07:00
Howard Mao
410e3e5366 make sure TraceGen gets correct addresses 2016-08-04 11:08:25 -07:00
Howard Mao
0a85e92652 Allow additional internal MMIO devices to be created without changing BaseConfig 2016-08-04 11:04:52 -07:00
Howard Mao
f04aefc95c get rid of deprecated ZynqAdapter 2016-08-02 13:14:20 -07:00
Howard Mao
63b814fcd7 only run the important (high coverage) tests in regression suite 2016-08-02 10:54:05 -07:00
Howard Mao
b7723f1ff8 make unit tests local to the packages being tested 2016-08-01 17:02:00 -07:00
Howard Mao
98eede0505 some refactoring in RocketChip top-level 2016-08-01 17:02:00 -07:00
Megan Wachs
55c992bb3a Use FoldRight() instead of for loop 2016-08-01 16:56:33 -07:00
Megan Wachs
8db2e8829f Allow aggregate CONFIG on Command Line 2016-08-01 14:24:16 -07:00
Andrew Waterman
fe670e5421 Stop using deprecated FileSystemUtilities to create files 2016-07-31 18:04:56 -07:00
Andrew Waterman
058396aefe [rocket] Implement RVC 2016-07-29 17:56:42 -07:00
Howard Mao
cb86aaa46b fix trace generator addresses 2016-07-28 17:56:14 -07:00
Howard Mao
ecd1af326c fix L2 deadlock bug and add more advanced trace generator 2016-07-26 12:43:08 -07:00
Howard Mao
1063d90993 make sure L1 and L2 agree on coherence policy 2016-07-25 12:20:49 -07:00
Howard Mao
6a5b2d7f59 fix assembly tests for configurations without VMU and/or user mode 2016-07-22 17:21:57 -07:00
Howard Mao
75347eed56 some fixes and cleanup to stateless bridge 2016-07-21 19:51:26 -07:00
Megan Wachs
c31c650def If NTiles == 1, only use MEI. Also Create configuration for ManagerToClientStatelessBridge. 2016-07-21 13:54:28 -07:00
Howard Mao
20df74d138 generate more L1 voluntary releases in TraceGen 2016-07-21 12:33:55 -07:00