riscv/fpga-shells
1
0
Fork 0
Code Releases Activity

Initial commit for fpga-shells

Browse Source
This commit is contained in:
Shreesha Srinath
2017-08-16 11:23:45 -07:00
commit ab8cf0775f
38 changed files with 2820 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
xilinx/Makefile Normal file
View File

@ -0,0 +1,42 @@
VIVADO ?= vivado
VIVADOFLAGS := \
-nojournal -mode batch \
-source $(fpga_board_script_dir)/board.tcl \
-source $(fpga_common_script_dir)/prologue.tcl
# Path to a program in raw binary format to be flashed into the address that the
# bootrom jumps to.
# FIXME: This variable should probably be communicated by a higher-level Makefile
FLASHED_PROGRAM ?=
# Init project
init = $(FPGA_BUILD_DIR)/.init
$(init): $(fpga_common_script_dir)/init.tcl
mkdir -p $(FPGA_BUILD_DIR) && \
cd $(FPGA_BUILD_DIR) && \
VSRCS="$(VSRCS)" $(VIVADO) $(VIVADOFLAGS) -source $<
.PHONY: init
init: $(init)
# Generate bitstream
bit := $(FPGA_BUILD_DIR)/obj/$(FPGA_TOP_SYSTEM).bit
$(bit): $(fpga_common_script_dir)/vivado.tcl $(init)
cd $(FPGA_BUILD_DIR) && \
VSRCS="$(VSRCS)" $(VIVADO) $(VIVADOFLAGS) -source $<
.PHONY: bit
bit: $(bit)
# Generate mcs
mcs := $(FPGA_BUILD_DIR)/obj/system.mcs
$(mcs): $(bit)
cd $(FPGA_BUILD_DIR) && \
$(VIVADO) $(VIVADOFLAGS) $(fpga_common_script_dir)/write_cfgmem.tcl -tclargs $(BOARD) $@ $^ $(FLASHED_PROGRAM)
.PHONY: mcs
mcs: $(mcs)
.PHONY: clean
clean::
rm -rf $(FPGA_BUILD_DIR)

5
xilinx/arty/constraints/arty-config.xdc Normal file
View File

@ -0,0 +1,5 @@
set_property -dict [list \
CONFIG_VOLTAGE {3.3} \
CFGBVS {VCCO} \
BITSTREAM.CONFIG.SPI_BUSWIDTH {4} \
] [current_design]

240
xilinx/arty/constraints/arty-master.xdc Normal file
View File

@ -0,0 +1,240 @@
## This file is a general .xdc for the ARTY Rev. B
## To use it in a project:
## - uncomment the lines corresponding to used pins
## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project
## Clock signal
set_property -dict { PACKAGE_PIN E3 IOSTANDARD LVCMOS33 } [get_ports { CLK100MHZ }]; #IO_L12P_T1_MRCC_35 Sch=gclk[100]
create_clock -add -name sys_clk_pin -period 10.00 -waveform {0 5} [get_ports {CLK100MHZ}];
create_clock -add -name JTCK -period 100 -waveform {0 50} [get_ports {jd_2}];
##Switches
set_property -dict { PACKAGE_PIN A8 IOSTANDARD LVCMOS33 } [get_ports { sw_0 }]; #IO_L12N_T1_MRCC_16 Sch=sw[0]
set_property -dict { PACKAGE_PIN C11 IOSTANDARD LVCMOS33 } [get_ports { sw_1 }]; #IO_L13P_T2_MRCC_16 Sch=sw[1]
set_property -dict { PACKAGE_PIN C10 IOSTANDARD LVCMOS33 } [get_ports { sw_2 }]; #IO_L13N_T2_MRCC_16 Sch=sw[2]
set_property -dict { PACKAGE_PIN A10 IOSTANDARD LVCMOS33 } [get_ports { sw_3 }]; #IO_L14P_T2_SRCC_16 Sch=sw[3]
##RGB LEDs
set_property -dict { PACKAGE_PIN E1 IOSTANDARD LVCMOS33 } [get_ports { led0_b }]; #IO_L18N_T2_35 Sch=led0_b
set_property -dict { PACKAGE_PIN F6 IOSTANDARD LVCMOS33 } [get_ports { led0_g }]; #IO_L19N_T3_VREF_35 Sch=led0_g
set_property -dict { PACKAGE_PIN G6 IOSTANDARD LVCMOS33 } [get_ports { led0_r }]; #IO_L19P_T3_35 Sch=led0_r
set_property -dict { PACKAGE_PIN G4 IOSTANDARD LVCMOS33 } [get_ports { led1_b }]; #IO_L20P_T3_35 Sch=led1_b
set_property -dict { PACKAGE_PIN J4 IOSTANDARD LVCMOS33 } [get_ports { led1_g }]; #IO_L21P_T3_DQS_35 Sch=led1_g
set_property -dict { PACKAGE_PIN G3 IOSTANDARD LVCMOS33 } [get_ports { led1_r }]; #IO_L20N_T3_35 Sch=led1_r
set_property -dict { PACKAGE_PIN H4 IOSTANDARD LVCMOS33 } [get_ports { led2_b }]; #IO_L21N_T3_DQS_35 Sch=led2_b
set_property -dict { PACKAGE_PIN J2 IOSTANDARD LVCMOS33 } [get_ports { led2_g }]; #IO_L22N_T3_35 Sch=led2_g
set_property -dict { PACKAGE_PIN J3 IOSTANDARD LVCMOS33 } [get_ports { led2_r }]; #IO_L22P_T3_35 Sch=led2_r
#set_property -dict { PACKAGE_PIN K2 IOSTANDARD LVCMOS33 } [get_ports { led3_b }]; #IO_L23P_T3_35 Sch=led3_b
#set_property -dict { PACKAGE_PIN H6 IOSTANDARD LVCMOS33 } [get_ports { led3_g }]; #IO_L24P_T3_35 Sch=led3_g
#set_property -dict { PACKAGE_PIN K1 IOSTANDARD LVCMOS33 } [get_ports { led3_r }]; #IO_L23N_T3_35 Sch=led3_r
##LEDs
set_property -dict { PACKAGE_PIN H5 IOSTANDARD LVCMOS33 } [get_ports { led_0 }]; #IO_L24N_T3_35 Sch=led[4]
set_property -dict { PACKAGE_PIN J5 IOSTANDARD LVCMOS33 } [get_ports { led_1 }]; #IO_25_35 Sch=led[5]
set_property -dict { PACKAGE_PIN T9 IOSTANDARD LVCMOS33 } [get_ports { led_2 }]; #IO_L24P_T3_A01_D17_14 Sch=led[6]
set_property -dict { PACKAGE_PIN T10 IOSTANDARD LVCMOS33 } [get_ports { led_3 }]; #IO_L24N_T3_A00_D16_14 Sch=led[7]
##Buttons
set_property -dict { PACKAGE_PIN D9 IOSTANDARD LVCMOS33 } [get_ports { btn_0 }]; #IO_L6N_T0_VREF_16 Sch=btn[0]
set_property -dict { PACKAGE_PIN C9 IOSTANDARD LVCMOS33 } [get_ports { btn_1 }]; #IO_L11P_T1_SRCC_16 Sch=btn[1]
set_property -dict { PACKAGE_PIN B9 IOSTANDARD LVCMOS33 } [get_ports { btn_2 }]; #IO_L11N_T1_SRCC_16 Sch=btn[2]
set_property -dict { PACKAGE_PIN B8 IOSTANDARD LVCMOS33 } [get_ports { btn_3 }]; #IO_L12P_T1_MRCC_16 Sch=btn[3]
##Pmod Header JA
set_property -dict { PACKAGE_PIN G13 IOSTANDARD LVCMOS33 } [get_ports { ja_0 }]; #IO_0_15 Sch=ja[1]
set_property -dict { PACKAGE_PIN B11 IOSTANDARD LVCMOS33 } [get_ports { ja_1 }]; #IO_L4P_T0_15 Sch=ja[2]
set_property -dict { PACKAGE_PIN A11 IOSTANDARD LVCMOS33 } [get_ports { ja_2 }]; #IO_L4N_T0_15 Sch=ja[3]
set_property -dict { PACKAGE_PIN D12 IOSTANDARD LVCMOS33 } [get_ports { ja_3 }]; #IO_L6P_T0_15 Sch=ja[4]
set_property -dict { PACKAGE_PIN D13 IOSTANDARD LVCMOS33 } [get_ports { ja_4 }]; #IO_L6N_T0_VREF_15 Sch=ja[7]
set_property -dict { PACKAGE_PIN B18 IOSTANDARD LVCMOS33 } [get_ports { ja_5 }]; #IO_L10P_T1_AD11P_15 Sch=ja[8]
set_property -dict { PACKAGE_PIN A18 IOSTANDARD LVCMOS33 } [get_ports { ja_6 }]; #IO_L10N_T1_AD11N_15 Sch=ja[9]
set_property -dict { PACKAGE_PIN K16 IOSTANDARD LVCMOS33 } [get_ports { ja_7 }]; #IO_25_15 Sch=ja[10]
##Pmod Header JB
#set_property -dict { PACKAGE_PIN E15 IOSTANDARD LVCMOS33 } [get_ports { jb_0 }]; #IO_L11P_T1_SRCC_15 Sch=jb_p[1]
#set_property -dict { PACKAGE_PIN E16 IOSTANDARD LVCMOS33 } [get_ports { jb_1 }]; #IO_L11N_T1_SRCC_15 Sch=jb_n[1]
#set_property -dict { PACKAGE_PIN D15 IOSTANDARD LVCMOS33 } [get_ports { jb_2 }]; #IO_L12P_T1_MRCC_15 Sch=jb_p[2]
#set_property -dict { PACKAGE_PIN C15 IOSTANDARD LVCMOS33 } [get_ports { jb_3 }]; #IO_L12N_T1_MRCC_15 Sch=jb_n[2]
#set_property -dict { PACKAGE_PIN J17 IOSTANDARD LVCMOS33 } [get_ports { jb_4 }]; #IO_L23P_T3_FOE_B_15 Sch=jb_p[3]
#set_property -dict { PACKAGE_PIN J18 IOSTANDARD LVCMOS33 } [get_ports { jb_5 }]; #IO_L23N_T3_FWE_B_15 Sch=jb_n[3]
#set_property -dict { PACKAGE_PIN K15 IOSTANDARD LVCMOS33 } [get_ports { jb_6 }]; #IO_L24P_T3_RS1_15 Sch=jb_p[4]
#set_property -dict { PACKAGE_PIN J15 IOSTANDARD LVCMOS33 } [get_ports { jb_7 }]; #IO_L24N_T3_RS0_15 Sch=jb_n[4]
##Pmod Header JC
#set_property -dict { PACKAGE_PIN U12 IOSTANDARD LVCMOS33 } [get_ports { jc[0] }]; #IO_L20P_T3_A08_D24_14 Sch=jc_p[1]
#set_property -dict { PACKAGE_PIN V12 IOSTANDARD LVCMOS33 } [get_ports { jc[1] }]; #IO_L20N_T3_A07_D23_14 Sch=jc_n[1]
#set_property -dict { PACKAGE_PIN V10 IOSTANDARD LVCMOS33 } [get_ports { jc[2] }]; #IO_L21P_T3_DQS_14 Sch=jc_p[2]
#set_property -dict { PACKAGE_PIN V11 IOSTANDARD LVCMOS33 } [get_ports { jc[3] }]; #IO_L21N_T3_DQS_A06_D22_14 Sch=jc_n[2]
#set_property -dict { PACKAGE_PIN U14 IOSTANDARD LVCMOS33 } [get_ports { jc[4] }]; #IO_L22P_T3_A05_D21_14 Sch=jc_p[3]
#set_property -dict { PACKAGE_PIN V14 IOSTANDARD LVCMOS33 } [get_ports { jc[5] }]; #IO_L22N_T3_A04_D20_14 Sch=jc_n[3]
#set_property -dict { PACKAGE_PIN T13 IOSTANDARD LVCMOS33 } [get_ports { jc[6] }]; #IO_L23P_T3_A03_D19_14 Sch=jc_p[4]
#set_property -dict { PACKAGE_PIN U13 IOSTANDARD LVCMOS33 } [get_ports { jc[7] }]; #IO_L23N_T3_A02_D18_14 Sch=jc_n[4]
##Pmod Header JD
set_property -dict { PACKAGE_PIN D4 IOSTANDARD LVCMOS33 } [get_ports { jd_0 }]; #IO_L11N_T1_SRCC_35 Sch=jd[1]
set_property -dict { PACKAGE_PIN D3 IOSTANDARD LVCMOS33 } [get_ports { jd_1 }]; #IO_L12N_T1_MRCC_35 Sch=jd[2]
set_property -dict { PACKAGE_PIN F4 IOSTANDARD LVCMOS33 } [get_ports { jd_2 }]; #IO_L13P_T2_MRCC_35 Sch=jd[3]
#set_property -dict { PACKAGE_PIN F3 IOSTANDARD LVCMOS33 } [get_ports { jd_3 }]; #IO_L13N_T2_MRCC_35 Sch=jd[4]
set_property -dict { PACKAGE_PIN E2 IOSTANDARD LVCMOS33 } [get_ports { jd_4 }]; #IO_L14P_T2_SRCC_35 Sch=jd[7]
set_property -dict { PACKAGE_PIN D2 IOSTANDARD LVCMOS33 } [get_ports { jd_5 }]; #IO_L14N_T2_SRCC_35 Sch=jd[8]
set_property -dict { PACKAGE_PIN H2 IOSTANDARD LVCMOS33 } [get_ports { jd_6 }]; #IO_L15P_T2_DQS_35 Sch=jd[9]
#set_property -dict { PACKAGE_PIN G2 IOSTANDARD LVCMOS33 } [get_ports { jd_7 }]; #IO_L15N_T2_DQS_35 Sch=jd[10]
##USB-UART Interface (FTDI FT2232H)
set_property -dict { PACKAGE_PIN D10 IOSTANDARD LVCMOS33 } [get_ports { uart_rxd_out }]; #IO_L19N_T3_VREF_16 Sch=uart_rxd_out
set_property -dict { PACKAGE_PIN A9 IOSTANDARD LVCMOS33 } [get_ports { uart_txd_in }]; #IO_L14N_T2_SRCC_16 Sch=uart_txd_in
##ChipKit Single Ended Analog Inputs
##NOTE: The ck_an_p pins can be used as single ended analog inputs with voltages from 0-3.3V (Chipkit Analog pins A0-A5).
## These signals should only be connected to the XADC core. When using these pins as digital I/O, use pins ck_io[14-19].
#set_property -dict { PACKAGE_PIN C5 IOSTANDARD LVCMOS33 } [get_ports { ck_an_n[0] }]; #IO_L1N_T0_AD4N_35 Sch=ck_an_n[0]
#set_property -dict { PACKAGE_PIN C6 IOSTANDARD LVCMOS33 } [get_ports { ck_an_p[0] }]; #IO_L1P_T0_AD4P_35 Sch=ck_an_p[0]
#set_property -dict { PACKAGE_PIN A5 IOSTANDARD LVCMOS33 } [get_ports { ck_an_n[1] }]; #IO_L3N_T0_DQS_AD5N_35 Sch=ck_an_n[1]
#set_property -dict { PACKAGE_PIN A6 IOSTANDARD LVCMOS33 } [get_ports { ck_an_p[1] }]; #IO_L3P_T0_DQS_AD5P_35 Sch=ck_an_p[1]
#set_property -dict { PACKAGE_PIN B4 IOSTANDARD LVCMOS33 } [get_ports { ck_an_n[2] }]; #IO_L7N_T1_AD6N_35 Sch=ck_an_n[2]
#set_property -dict { PACKAGE_PIN C4 IOSTANDARD LVCMOS33 } [get_ports { ck_an_p[2] }]; #IO_L7P_T1_AD6P_35 Sch=ck_an_p[2]
#set_property -dict { PACKAGE_PIN A1 IOSTANDARD LVCMOS33 } [get_ports { ck_an_n[3] }]; #IO_L9N_T1_DQS_AD7N_35 Sch=ck_an_n[3]
#set_property -dict { PACKAGE_PIN B1 IOSTANDARD LVCMOS33 } [get_ports { ck_an_p[3] }]; #IO_L9P_T1_DQS_AD7P_35 Sch=ck_an_p[3]
#set_property -dict { PACKAGE_PIN B2 IOSTANDARD LVCMOS33 } [get_ports { ck_an_n[4] }]; #IO_L10N_T1_AD15N_35 Sch=ck_an_n[4]
#set_property -dict { PACKAGE_PIN B3 IOSTANDARD LVCMOS33 } [get_ports { ck_an_p[4] }]; #IO_L10P_T1_AD15P_35 Sch=ck_an_p[4]
#set_property -dict { PACKAGE_PIN C14 IOSTANDARD LVCMOS33 } [get_ports { ck_an_n[5] }]; #IO_L1N_T0_AD0N_15 Sch=ck_an_n[5]
#set_property -dict { PACKAGE_PIN D14 IOSTANDARD LVCMOS33 } [get_ports { ck_an_p[5] }]; #IO_L1P_T0_AD0P_15 Sch=ck_an_p[5]
##ChipKit Digital I/O Low
set_property -dict { PACKAGE_PIN V15 IOSTANDARD LVCMOS33 } [get_ports { ck_io_0 }]; #IO_L16P_T2_CSI_B_14 Sch=ck_io[0]
set_property -dict { PACKAGE_PIN U16 IOSTANDARD LVCMOS33 } [get_ports { ck_io_1 }]; #IO_L18P_T2_A12_D28_14 Sch=ck_io[1]
set_property -dict { PACKAGE_PIN P14 IOSTANDARD LVCMOS33 } [get_ports { ck_io_2 }]; #IO_L8N_T1_D12_14 Sch=ck_io[2]
set_property -dict { PACKAGE_PIN T11 IOSTANDARD LVCMOS33 } [get_ports { ck_io_3 }]; #IO_L19P_T3_A10_D26_14 Sch=ck_io[3]
set_property -dict { PACKAGE_PIN R12 IOSTANDARD LVCMOS33 } [get_ports { ck_io_4 }]; #IO_L5P_T0_D06_14 Sch=ck_io[4]
set_property -dict { PACKAGE_PIN T14 IOSTANDARD LVCMOS33 } [get_ports { ck_io_5 }]; #IO_L14P_T2_SRCC_14 Sch=ck_io[5]
set_property -dict { PACKAGE_PIN T15 IOSTANDARD LVCMOS33 } [get_ports { ck_io_6 }]; #IO_L14N_T2_SRCC_14 Sch=ck_io[6]
set_property -dict { PACKAGE_PIN T16 IOSTANDARD LVCMOS33 } [get_ports { ck_io_7 }]; #IO_L15N_T2_DQS_DOUT_CSO_B_14 Sch=ck_io[7]
set_property -dict { PACKAGE_PIN N15 IOSTANDARD LVCMOS33 } [get_ports { ck_io_8 }]; #IO_L11P_T1_SRCC_14 Sch=ck_io[8]
set_property -dict { PACKAGE_PIN M16 IOSTANDARD LVCMOS33 } [get_ports { ck_io_9 }]; #IO_L10P_T1_D14_14 Sch=ck_io[9]
set_property -dict { PACKAGE_PIN V17 IOSTANDARD LVCMOS33 } [get_ports { ck_io_10 }]; #IO_L18N_T2_A11_D27_14 Sch=ck_io[10]
set_property -dict { PACKAGE_PIN U18 IOSTANDARD LVCMOS33 } [get_ports { ck_io_11 }]; #IO_L17N_T2_A13_D29_14 Sch=ck_io[11]
set_property -dict { PACKAGE_PIN R17 IOSTANDARD LVCMOS33 } [get_ports { ck_io_12 }]; #IO_L12N_T1_MRCC_14 Sch=ck_io[12]
set_property -dict { PACKAGE_PIN P17 IOSTANDARD LVCMOS33 } [get_ports { ck_io_13 }]; #IO_L12P_T1_MRCC_14 Sch=ck_io[13]
##ChipKit Digital I/O On Outer Analog Header
##NOTE: These pins should be used when using the analog header signals A0-A5 as digital I/O (Chipkit digital pins 14-19)
set_property -dict { PACKAGE_PIN F5 IOSTANDARD LVCMOS33 } [get_ports { ck_io_14 }]; #IO_0_35 Sch=ck_a[0]
set_property -dict { PACKAGE_PIN D8 IOSTANDARD LVCMOS33 } [get_ports { ck_io_15 }]; #IO_L4P_T0_35 Sch=ck_a[1]
set_property -dict { PACKAGE_PIN C7 IOSTANDARD LVCMOS33 } [get_ports { ck_io_16 }]; #IO_L4N_T0_35 Sch=ck_a[2]
set_property -dict { PACKAGE_PIN E7 IOSTANDARD LVCMOS33 } [get_ports { ck_io_17 }]; #IO_L6P_T0_35 Sch=ck_a[3]
set_property -dict { PACKAGE_PIN D7 IOSTANDARD LVCMOS33 } [get_ports { ck_io_18 }]; #IO_L6N_T0_VREF_35 Sch=ck_a[4]
set_property -dict { PACKAGE_PIN D5 IOSTANDARD LVCMOS33 } [get_ports { ck_io_19 }]; #IO_L11P_T1_SRCC_35 Sch=ck_a[5]
##ChipKit Digital I/O On Inner Analog Header
##NOTE: These pins will need to be connected to the XADC core when used as differential analog inputs (Chipkit analog pins A6-A11)
#set_property -dict { PACKAGE_PIN B7 IOSTANDARD LVCMOS33 } [get_ports { ck_io[20] }]; #IO_L2P_T0_AD12P_35 Sch=ad_p[12]
#set_property -dict { PACKAGE_PIN B6 IOSTANDARD LVCMOS33 } [get_ports { ck_io[21] }]; #IO_L2N_T0_AD12N_35 Sch=ad_n[12]
#set_property -dict { PACKAGE_PIN E6 IOSTANDARD LVCMOS33 } [get_ports { ck_io[22] }]; #IO_L5P_T0_AD13P_35 Sch=ad_p[13]
#set_property -dict { PACKAGE_PIN E5 IOSTANDARD LVCMOS33 } [get_ports { ck_io[23] }]; #IO_L5N_T0_AD13N_35 Sch=ad_n[13]
#set_property -dict { PACKAGE_PIN A4 IOSTANDARD LVCMOS33 } [get_ports { ck_io[24] }]; #IO_L8P_T1_AD14P_35 Sch=ad_p[14]
#set_property -dict { PACKAGE_PIN A3 IOSTANDARD LVCMOS33 } [get_ports { ck_io[25] }]; #IO_L8N_T1_AD14N_35 Sch=ad_n[14]
##ChipKit Digital I/O High
#set_property -dict { PACKAGE_PIN U11 IOSTANDARD LVCMOS33 } [get_ports { ck_io[26] }]; #IO_L19N_T3_A09_D25_VREF_14 Sch=ck_io[26]
#set_property -dict { PACKAGE_PIN V16 IOSTANDARD LVCMOS33 } [get_ports { ck_io[27] }]; #IO_L16N_T2_A15_D31_14 Sch=ck_io[27]
#set_property -dict { PACKAGE_PIN M13 IOSTANDARD LVCMOS33 } [get_ports { ck_io[28] }]; #IO_L6N_T0_D08_VREF_14 Sch=ck_io[28]
#set_property -dict { PACKAGE_PIN R10 IOSTANDARD LVCMOS33 } [get_ports { ck_io[29] }]; #IO_25_14 Sch=ck_io[29]
#set_property -dict { PACKAGE_PIN R11 IOSTANDARD LVCMOS33 } [get_ports { ck_io[30] }]; #IO_0_14 Sch=ck_io[30]
#set_property -dict { PACKAGE_PIN R13 IOSTANDARD LVCMOS33 } [get_ports { ck_io[31] }]; #IO_L5N_T0_D07_14 Sch=ck_io[31]
#set_property -dict { PACKAGE_PIN R15 IOSTANDARD LVCMOS33 } [get_ports { ck_io[32] }]; #IO_L13N_T2_MRCC_14 Sch=ck_io[32]
#set_property -dict { PACKAGE_PIN P15 IOSTANDARD LVCMOS33 } [get_ports { ck_io[33] }]; #IO_L13P_T2_MRCC_14 Sch=ck_io[33]
#set_property -dict { PACKAGE_PIN R16 IOSTANDARD LVCMOS33 } [get_ports { ck_io[34] }]; #IO_L15P_T2_DQS_RDWR_B_14 Sch=ck_io[34]
#set_property -dict { PACKAGE_PIN N16 IOSTANDARD LVCMOS33 } [get_ports { ck_io[35] }]; #IO_L11N_T1_SRCC_14 Sch=ck_io[35]
#set_property -dict { PACKAGE_PIN N14 IOSTANDARD LVCMOS33 } [get_ports { ck_io[36] }]; #IO_L8P_T1_D11_14 Sch=ck_io[36]
#set_property -dict { PACKAGE_PIN U17 IOSTANDARD LVCMOS33 } [get_ports { ck_io[37] }]; #IO_L17P_T2_A14_D30_14 Sch=ck_io[37]
#set_property -dict { PACKAGE_PIN T18 IOSTANDARD LVCMOS33 } [get_ports { ck_io[38] }]; #IO_L7N_T1_D10_14 Sch=ck_io[38]
#set_property -dict { PACKAGE_PIN R18 IOSTANDARD LVCMOS33 } [get_ports { ck_io[39] }]; #IO_L7P_T1_D09_14 Sch=ck_io[39]
#set_property -dict { PACKAGE_PIN P18 IOSTANDARD LVCMOS33 } [get_ports { ck_io[40] }]; #IO_L9N_T1_DQS_D13_14 Sch=ck_io[40]
#set_property -dict { PACKAGE_PIN N17 IOSTANDARD LVCMOS33 } [get_ports { ck_io[41] }]; #IO_L9P_T1_DQS_14 Sch=ck_io[41]
## ChipKit SPI
set_property -dict { PACKAGE_PIN G1 IOSTANDARD LVCMOS33 } [get_ports { ck_miso }]; #IO_L17N_T2_35 Sch=ck_miso
set_property -dict { PACKAGE_PIN H1 IOSTANDARD LVCMOS33 } [get_ports { ck_mosi }]; #IO_L17P_T2_35 Sch=ck_mosi
set_property -dict { PACKAGE_PIN F1 IOSTANDARD LVCMOS33 } [get_ports { ck_sck }]; #IO_L18P_T2_35 Sch=ck_sck
set_property -dict { PACKAGE_PIN C1 IOSTANDARD LVCMOS33 } [get_ports { ck_ss }]; #IO_L16N_T2_35 Sch=ck_ss
## ChipKit I2C
#set_property -dict { PACKAGE_PIN L18 IOSTANDARD LVCMOS33 } [get_ports { ck_scl }]; #IO_L4P_T0_D04_14 Sch=ck_scl
#set_property -dict { PACKAGE_PIN M18 IOSTANDARD LVCMOS33 } [get_ports { ck_sda }]; #IO_L4N_T0_D05_14 Sch=ck_sda
#set_property -dict { PACKAGE_PIN A14 IOSTANDARD LVCMOS33 } [get_ports { scl_pup }]; #IO_L9N_T1_DQS_AD3N_15 Sch=scl_pup
#set_property -dict { PACKAGE_PIN A13 IOSTANDARD LVCMOS33 } [get_ports { sda_pup }]; #IO_L9P_T1_DQS_AD3P_15 Sch=sda_pup
##Misc. ChipKit signals
#set_property -dict { PACKAGE_PIN M17 IOSTANDARD LVCMOS33 } [get_ports { ck_ioa }]; #IO_L10N_T1_D15_14 Sch=ck_ioa
set_property -dict { PACKAGE_PIN C2 IOSTANDARD LVCMOS33 } [get_ports { ck_rst }]; #IO_L16P_T2_35 Sch=ck_rst
##SMSC Ethernet PHY
#set_property -dict { PACKAGE_PIN D17 IOSTANDARD LVCMOS33 } [get_ports { eth_col }]; #IO_L16N_T2_A27_15 Sch=eth_col
#set_property -dict { PACKAGE_PIN G14 IOSTANDARD LVCMOS33 } [get_ports { eth_crs }]; #IO_L15N_T2_DQS_ADV_B_15 Sch=eth_crs
#set_property -dict { PACKAGE_PIN F16 IOSTANDARD LVCMOS33 } [get_ports { eth_mdc }]; #IO_L14N_T2_SRCC_15 Sch=eth_mdc
#set_property -dict { PACKAGE_PIN K13 IOSTANDARD LVCMOS33 } [get_ports { eth_mdio }]; #IO_L17P_T2_A26_15 Sch=eth_mdio
#set_property -dict { PACKAGE_PIN G18 IOSTANDARD LVCMOS33 } [get_ports { eth_ref_clk }]; #IO_L22P_T3_A17_15 Sch=eth_ref_clk
#set_property -dict { PACKAGE_PIN C16 IOSTANDARD LVCMOS33 } [get_ports { eth_rstn }]; #IO_L20P_T3_A20_15 Sch=eth_rstn
#set_property -dict { PACKAGE_PIN F15 IOSTANDARD LVCMOS33 } [get_ports { eth_rx_clk }]; #IO_L14P_T2_SRCC_15 Sch=eth_rx_clk
#set_property -dict { PACKAGE_PIN G16 IOSTANDARD LVCMOS33 } [get_ports { eth_rx_dv }]; #IO_L13N_T2_MRCC_15 Sch=eth_rx_dv
#set_property -dict { PACKAGE_PIN D18 IOSTANDARD LVCMOS33 } [get_ports { eth_rxd[0] }]; #IO_L21N_T3_DQS_A18_15 Sch=eth_rxd[0]
#set_property -dict { PACKAGE_PIN E17 IOSTANDARD LVCMOS33 } [get_ports { eth_rxd[1] }]; #IO_L16P_T2_A28_15 Sch=eth_rxd[1]
#set_property -dict { PACKAGE_PIN E18 IOSTANDARD LVCMOS33 } [get_ports { eth_rxd[2] }]; #IO_L21P_T3_DQS_15 Sch=eth_rxd[2]
#set_property -dict { PACKAGE_PIN G17 IOSTANDARD LVCMOS33 } [get_ports { eth_rxd[3] }]; #IO_L18N_T2_A23_15 Sch=eth_rxd[3]
#set_property -dict { PACKAGE_PIN C17 IOSTANDARD LVCMOS33 } [get_ports { eth_rxerr }]; #IO_L20N_T3_A19_15 Sch=eth_rxerr
#set_property -dict { PACKAGE_PIN H16 IOSTANDARD LVCMOS33 } [get_ports { eth_tx_clk }]; #IO_L13P_T2_MRCC_15 Sch=eth_tx_clk
#set_property -dict { PACKAGE_PIN H15 IOSTANDARD LVCMOS33 } [get_ports { eth_tx_en }]; #IO_L19N_T3_A21_VREF_15 Sch=eth_tx_en
#set_property -dict { PACKAGE_PIN H14 IOSTANDARD LVCMOS33 } [get_ports { eth_txd[0] }]; #IO_L15P_T2_DQS_15 Sch=eth_txd[0]
#set_property -dict { PACKAGE_PIN J14 IOSTANDARD LVCMOS33 } [get_ports { eth_txd[1] }]; #IO_L19P_T3_A22_15 Sch=eth_txd[1]
#set_property -dict { PACKAGE_PIN J13 IOSTANDARD LVCMOS33 } [get_ports { eth_txd[2] }]; #IO_L17N_T2_A25_15 Sch=eth_txd[2]
#set_property -dict { PACKAGE_PIN H17 IOSTANDARD LVCMOS33 } [get_ports { eth_txd[3] }]; #IO_L18P_T2_A24_15 Sch=eth_txd[3]
##Quad SPI Flash
set_property -dict { PACKAGE_PIN L16 IOSTANDARD LVCMOS33 IOB TRUE } [get_ports { qspi_sck }];
create_clock -add -name qspi_sck_pin -period 20.00 -waveform {0 10} [get_ports { qspi_sck }];
set_property -dict { PACKAGE_PIN L13 IOSTANDARD LVCMOS33 IOB TRUE } [get_ports { qspi_cs }]; #IO_L6P_T0_FCS_B_14 Sch=qspi_cs
set_property -dict { PACKAGE_PIN K17 IOSTANDARD LVCMOS33 IOB TRUE PULLUP TRUE } [get_ports { qspi_dq_0 }]; #IO_L1P_T0_D00_MOSI_14 Sch=qspi_dq[0]
set_property -dict { PACKAGE_PIN K18 IOSTANDARD LVCMOS33 IOB TRUE PULLUP TRUE } [get_ports { qspi_dq_1 }]; #IO_L1N_T0_D01_DIN_14 Sch=qspi_dq[1]
set_property -dict { PACKAGE_PIN L14 IOSTANDARD LVCMOS33 IOB TRUE PULLUP TRUE } [get_ports { qspi_dq_2 }]; #IO_L2P_T0_D02_14 Sch=qspi_dq[2]
set_property -dict { PACKAGE_PIN M14 IOSTANDARD LVCMOS33 IOB TRUE PULLUP TRUE } [get_ports { qspi_dq_3 }]; #IO_L2N_T0_D03_14 Sch=qspi_dq[3]
##Power Measurements
#set_property -dict { PACKAGE_PIN B17 IOSTANDARD LVCMOS33 } [get_ports { vsnsvu_n }]; #IO_L7N_T1_AD2N_15 Sch=ad_n[2]
#set_property -dict { PACKAGE_PIN B16 IOSTANDARD LVCMOS33 } [get_ports { vsnsvu_p }]; #IO_L7P_T1_AD2P_15 Sch=ad_p[2]
#set_property -dict { PACKAGE_PIN B12 IOSTANDARD LVCMOS33 } [get_ports { vsns5v0_n }]; #IO_L3N_T0_DQS_AD1N_15 Sch=ad_n[1]
#set_property -dict { PACKAGE_PIN C12 IOSTANDARD LVCMOS33 } [get_ports { vsns5v0_p }]; #IO_L3P_T0_DQS_AD1P_15 Sch=ad_p[1]
#set_property -dict { PACKAGE_PIN F14 IOSTANDARD LVCMOS33 } [get_ports { isns5v0_n }]; #IO_L5N_T0_AD9N_15 Sch=ad_n[9]
#set_property -dict { PACKAGE_PIN F13 IOSTANDARD LVCMOS33 } [get_ports { isns5v0_p }]; #IO_L5P_T0_AD9P_15 Sch=ad_p[9]
#set_property -dict { PACKAGE_PIN A16 IOSTANDARD LVCMOS33 } [get_ports { isns0v95_n }]; #IO_L8N_T1_AD10N_15 Sch=ad_n[10]
#set_property -dict { PACKAGE_PIN A15 IOSTANDARD LVCMOS33 } [get_ports { isns0v95_p }]; #IO_L8P_T1_AD10P_15 Sch=ad_p[10]
set_clock_groups -asynchronous \
-group [list \
[get_clocks -include_generated_clocks -of_objects [get_ports jd_2]]] \
-group [list \
[get_clocks -of_objects [get_pins ip_mmcm/inst/mmcm_adv_inst/CLKOUT0]]] \
-group [list \
[get_clocks -of_objects [get_pins ip_mmcm/inst/mmcm_adv_inst/CLKOUT1]] \
[get_clocks -of_objects [get_pins ip_mmcm/inst/mmcm_adv_inst/CLKOUT2]]]

5
xilinx/arty/tcl/board.tcl Normal file
View File

@ -0,0 +1,5 @@
# See LICENSE for license details.
set name {arty}
set part_fpga {xc7a35ticsg324-1L}
set part_board {digilentinc.com:arty:part0:1.1}
set bootrom_inst {rom}

44
xilinx/arty/tcl/ip.tcl Normal file
View File

@ -0,0 +1,44 @@
# See LICENSE for license details.
create_ip -vendor xilinx.com -library ip -name clk_wiz -module_name mmcm -dir $ipdir -force
set_property -dict [list \
CONFIG.PRIMITIVE {MMCM} \
CONFIG.RESET_TYPE {ACTIVE_LOW} \
CONFIG.CLKOUT1_USED {true} \
CONFIG.CLKOUT2_USED {true} \
CONFIG.CLKOUT3_USED {true} \
CONFIG.CLKOUT1_REQUESTED_OUT_FREQ {8.388} \
CONFIG.CLKOUT2_REQUESTED_OUT_FREQ {65.000} \
CONFIG.CLKOUT3_REQUESTED_OUT_FREQ {32.500} \
] [get_ips mmcm]
create_ip -vendor xilinx.com -library ip -name proc_sys_reset -module_name reset_sys -dir $ipdir -force
set_property -dict [list \
CONFIG.C_EXT_RESET_HIGH {false} \
CONFIG.C_AUX_RESET_HIGH {false} \
CONFIG.C_NUM_BUS_RST {1} \
CONFIG.C_NUM_PERP_RST {1} \
CONFIG.C_NUM_INTERCONNECT_ARESETN {1} \
CONFIG.C_NUM_PERP_ARESETN {1} \
] [get_ips reset_sys]
create_ip -vendor xilinx.com -library ip -name ila -module_name ila -dir $ipdir -force
set_property -dict [list \
CONFIG.C_NUM_OF_PROBES {1} \
CONFIG.C_TRIGOUT_EN {false} \
CONFIG.C_TRIGIN_EN {false} \
CONFIG.C_MONITOR_TYPE {Native} \
CONFIG.C_ENABLE_ILA_AXI_MON {false} \
CONFIG.C_PROBE0_WIDTH {4} \
CONFIG.C_PROBE10_TYPE {1} \
CONFIG.C_PROBE10_WIDTH {32} \
CONFIG.C_PROBE11_TYPE {1} \
CONFIG.C_PROBE11_WIDTH {32} \
CONFIG.C_PROBE12_TYPE {1} \
CONFIG.C_PROBE12_WIDTH {64} \
CONFIG.C_PROBE13_TYPE {1} \
CONFIG.C_PROBE13_WIDTH {64} \
CONFIG.C_PROBE14_TYPE {1} \
CONFIG.C_PROBE14_WIDTH {97} \
] [get_ips ila]

10
xilinx/common/tcl/bitstream.tcl Normal file
View File

@ -0,0 +1,10 @@
# See LICENSE for license details.
# Write a bitstream for the current design
write_bitstream -force [file join $wrkdir "${top}.bit"]
# Save the timing delays for cells in the design in SDF format
write_sdf -force [file join $wrkdir "${top}.sdf"]
# Export the current netlist in verilog format
write_verilog -mode timesim -force [file join ${wrkdir} "${top}.v"]

7
xilinx/common/tcl/boards.tcl Normal file
View File

@ -0,0 +1,7 @@
# See LICENSE for license details.
namespace eval ::program::boards {}
set ::program::boards::spec [dict create \
arty [dict create iface spix4 size 16 bitaddr 0x0 memdev {n25q128-3.3v-spi-x1_x2_x4}] \
vc707 [dict create iface bpix16 size 128 bitaddr 0x3000000 ]]

38
xilinx/common/tcl/init.tcl Normal file
View File

@ -0,0 +1,38 @@
# See LICENSE for license details.
# Include helper functions
source [file join $scriptdir "util.tcl"]
# Create the diretory for IPs
file mkdir $ipdir
# Update the IP catalog
update_ip_catalog -rebuild
# Board specific IP implementation
source [file join $boarddir tcl ip.tcl]
# AR 58526 <http://www.xilinx.com/support/answers/58526.html>
set_property GENERATE_SYNTH_CHECKPOINT {false} [get_files -all {*.xci}]
# Get a list of IPs in the current design
set obj [get_ips]
# Generate target data for the inlcuded IPs in the design
generate_target all $obj
# Export the IP user files
export_ip_user_files -of_objects $obj -no_script -force
# Get the list of active source and constraint files
set obj [current_fileset]
#Xilinx bug workaround
#scrape IP tree for directories containing .vh files
#[get_property include_dirs] misses all IP core subdirectory includes if user has specified -dir flag in create_ip
set property_include_dirs [get_property include_dirs $obj]
# Include generated files for the IPs in the design
set ip_include_dirs [concat $property_include_dirs [findincludedir $ipdir "*.vh"]]
set ip_include_dirs [concat $ip_include_dirs [findincludedir $srcdir "*.h"]]
set ip_include_dirs [concat $ip_include_dirs [findincludedir $srcdir "*.vh"]]

7
xilinx/common/tcl/opt.tcl Normal file
View File

@ -0,0 +1,7 @@
# See LICENSE for license details.
# Optimize the netlist
opt_design -directive Explore
# Checkpoint the current design
write_checkpoint -force [file join $wrkdir post_opt]

13
xilinx/common/tcl/place.tcl Normal file
View File

@ -0,0 +1,13 @@
# See LICENSE for license details.
# Place the current design
place_design -directive Explore
# Optimize the current placed netlist
phys_opt_design -directive Explore
# Optimize dynamic power using intelligent clock gating
power_opt_design
# Checkpoint the current design
write_checkpoint -force [file join $wrkdir post_place]

3
xilinx/common/tcl/post-impl-debug.tcl Normal file
View File

@ -0,0 +1,3 @@
# See LICENSE for license details.
# Write debug probes, save MMI for BRAMs in the design

3
xilinx/common/tcl/pre-impl-debug.tcl Normal file
View File

@ -0,0 +1,3 @@
# See LICENSE for license details.
# Instantiate ILAs

64
xilinx/common/tcl/prologue.tcl Normal file
View File

@ -0,0 +1,64 @@
# See LICENSE for license details.
# Set the variable for the directory that includes all scripts
set scriptdir [file dirname [info script]]
# Set the variable for all the common files
set commondir [file dirname $scriptdir]
# Set the variable that points to board specific files
set boarddir [file join [file dirname $commondir] $name]
# Set the variable that points to board constraint files
set constraintsdir [file join $boarddir constraints]
# Set the variable that points to common verilog sources
set srcdir [file join $commondir vsrc]
# Creates a work directory
set wrkdir [file join [pwd] obj]
# Create the directory for IPs
set ipdir [file join $wrkdir ip]
# Set the top for the design based on an environment variable
set top $::env(FPGA_TOP_SYSTEM)
# Create an in-memory project
create_project -part $part_fpga -in_memory
# Set the board part, target language, default library, and IP directory
# paths for the current project
set_property -dict [list \
BOARD_PART $part_board \
TARGET_LANGUAGE {Verilog} \
DEFAULT_LIB {xil_defaultlib} \
IP_REPO_PATHS $ipdir \
] [current_project]
if {[get_filesets -quiet sources_1] eq ""} {
create_fileset -srcset sources_1
}
set obj [current_fileset]
# Add verilog files from VSRCS environment variable
if {[info exists ::env(VSRCS)]} {
# Split string into words even with multiple consecutive spaces
# http://wiki.tcl.tk/989
set vsrcs [regexp -inline -all -- {\S+} $::env(VSRCS)]
foreach vsrc $vsrcs {
add_files -norecurse -fileset $obj $vsrc
}
}
if {[get_filesets -quiet sim_1] eq ""} {
create_fileset -simset sim_1
}
set obj [current_fileset -simset]
if {[get_filesets -quiet constrs_1] eq ""} {
create_fileset -constrset constrs_1
}
set obj [current_fileset -constrset]
add_files -norecurse -fileset $obj [glob -directory $constraintsdir {*.xdc}]

44
xilinx/common/tcl/report.tcl Normal file
View File

@ -0,0 +1,44 @@
# See LICENSE for license details.
# Create a report directory
set rptdir [file join $wrkdir report]
file mkdir $rptdir
# Create a datasheet for the current design
report_datasheet -file [file join $rptdir datasheet.txt]
# Report utilization of the current device
set rptutil [file join $rptdir utilization.txt]
report_utilization -hierarchical -file $rptutil
# Report information about clock nets in the design
report_clock_utilization -file $rptutil -append
# Report the RAM resources utilized in the implemented design
report_ram_utilization -file $rptutil -append -detail
# Report timing summary for a max of 10 paths per group
report_timing_summary -file [file join $rptdir timing.txt] -max_paths 10
# Report the highest fanout of nets in the implemented design
report_high_fanout_nets -file [file join $rptdir fanout.txt] -timing -load_types -max_nets 25
# Run DRC
report_drc -file [file join $rptdir drc.txt]
# Report details of the IO banks in the design
report_io -file [file join $rptdir io.txt]
# Report a table of all clocks in the design
report_clocks -file [file join $rptdir clocks.txt]
# Fail loudly if timing not met
#
# We would ideally elevate critical warning Route 35-39 to an error, but it is
# currently not being emitted with our flow for some reason.
# https://forums.xilinx.com/t5/Implementation/Making-timing-violations-fatal-to-the-Vivado-build/m-p/716957#M15979
set timing_slack [get_property SLACK [get_timing_paths]]
if {$timing_slack < 0} {
puts "Failed to meet timing by $timing_slack, see [file join $rptdir timing.txt]"
exit 1
}

10
xilinx/common/tcl/route.tcl Normal file
View File

@ -0,0 +1,10 @@
# See LICENSE for license details.
# Route the current design
route_design -directive Explore
# Optimize the current design post routing
phys_opt_design -directive Explore
# Checkpoint the current design
write_checkpoint -force [file join $wrkdir post_route]

10
xilinx/common/tcl/synth.tcl Normal file
View File

@ -0,0 +1,10 @@
# See LICENSE for license details.
# Read the specified list of IP files
read_ip [glob -directory $ipdir [file join * {*.xci}]]
# Synthesize the design
synth_design -top $top -flatten_hierarchy rebuilt
# Checkpoint the current design
write_checkpoint -force [file join $wrkdir post_synth]

24
xilinx/common/tcl/util.tcl Normal file
View File

@ -0,0 +1,24 @@
# See LICENSE for license details.
# Helper function that recursively includes files given a directory and a
# pattern/suffix extensions
proc recglob { basedir pattern } {
set dirlist [glob -nocomplain -directory $basedir -type d *]
set findlist [glob -nocomplain -directory $basedir $pattern]
foreach dir $dirlist {
set reclist [recglob $dir $pattern]
set findlist [concat $findlist $reclist]
}
return $findlist
}
# Helper function to find all subdirectories containing ".vh" files
proc findincludedir { basedir pattern } {
set vhfiles [recglob $basedir $pattern]
set vhdirs {}
foreach match $vhfiles {
lappend vhdirs [file dir $match]
}
set uniquevhdirs [lsort -unique $vhdirs]
return $uniquevhdirs
}

25
xilinx/common/tcl/vivado.tcl Normal file
View File

@ -0,0 +1,25 @@
# See LICENSE for license details.
# Synthesize the design
source [file join $scriptdir "synth.tcl"]
# Pre-implementation debug
source [file join $scriptdir "pre-impl-debug.tcl"]
# Post synthesis optimization
source [file join $scriptdir "opt.tcl"]
# Place the design
source [file join $scriptdir "place.tcl"]
# Route the design
source [file join $scriptdir "route.tcl"]
# Generate bitstream and save verilog netlist
source [file join $scriptdir "bitstream.tcl"]
# Post-implementation debug
source [file join $scriptdir "post-impl-debug.tcl"]
# Create reports for the current implementation
source [file join $scriptdir "report.tcl"]

26
xilinx/common/tcl/write_cfgmem.tcl Normal file
View File

@ -0,0 +1,26 @@
# See LICENSE for license details.
#
# Create an MCS-format memory configuration file from a bitstream and an
# optional data file.
set script_program_dir [file dirname [info script]]
source [file join $script_program_dir {boards.tcl}]
if {$argc < 3 || $argc > 4} {
puts $argc
puts {Error: Invalid number of arguments}
puts {Usage: write_cfgmem.tcl board mcsfile bitfile [datafile]}
exit 1
}
lassign $argv board mcsfile bitfile datafile
if {![dict exists $::program::boards::spec $board]} {
puts {Unsupported board}
exit 1
}
set board [dict get $::program::boards::spec $board]
write_cfgmem -format mcs -interface [dict get $board iface] -size [dict get $board size] \
-loadbit "up [dict get $board bitaddr] $bitfile" \
-loaddata [expr {$datafile ne "" ? "up 0x400000 $datafile" : ""}] \
-file $mcsfile -force

15
xilinx/common/vsrc/PowerOnResetFPGAOnly.v Normal file
View File

@ -0,0 +1,15 @@
// See LICENSE file for license details.
module PowerOnResetFPGAOnly(
input clock,
output reg power_on_reset
);
initial begin
power_on_reset <= 1'b1;
end
always @(posedge clock) begin
power_on_reset <= 1'b0;
end
endmodule

75
xilinx/vc707/constraints/vc707-master.xdc Normal file
View File

@ -0,0 +1,75 @@
#---------------Physical Constraints-----------------
set_property BOARD_PIN {clk_p} [get_ports sys_diff_clock_clk_p]
set_property BOARD_PIN {clk_n} [get_ports sys_diff_clock_clk_n]
set_property BOARD_PIN {reset} [get_ports reset]
create_clock -name sys_diff_clk -period 5.0 [get_ports sys_diff_clock_clk_p]
set_input_jitter [get_clocks -of_objects [get_ports sys_diff_clock_clk_p]] 0.5
set_property BOARD_PIN {leds_8bits_tri_o_0} [get_ports led_0]
set_property BOARD_PIN {leds_8bits_tri_o_1} [get_ports led_1]
set_property BOARD_PIN {leds_8bits_tri_o_2} [get_ports led_2]
set_property BOARD_PIN {leds_8bits_tri_o_3} [get_ports led_3]
set_property BOARD_PIN {leds_8bits_tri_o_4} [get_ports led_4]
set_property BOARD_PIN {leds_8bits_tri_o_5} [get_ports led_5]
set_property BOARD_PIN {leds_8bits_tri_o_6} [get_ports led_6]
set_property BOARD_PIN {leds_8bits_tri_o_7} [get_ports led_7]
set_property PACKAGE_PIN AU33 [get_ports uart_rx]
set_property IOSTANDARD LVCMOS18 [get_ports uart_rx]
set_property IOB TRUE [get_ports uart_rx]
set_property PACKAGE_PIN AT32 [get_ports uart_ctsn]
set_property IOSTANDARD LVCMOS18 [get_ports uart_ctsn]
set_property IOB TRUE [get_ports uart_ctsn]
set_property PACKAGE_PIN AU36 [get_ports uart_tx]
set_property IOSTANDARD LVCMOS18 [get_ports uart_tx]
set_property IOB TRUE [get_ports uart_tx]
set_property PACKAGE_PIN AR34 [get_ports uart_rtsn]
set_property IOSTANDARD LVCMOS18 [get_ports uart_rtsn]
set_property IOB TRUE [get_ports uart_rtsn]
# FIXME: shreesha: I need to see if these matter and add them back
# currently everything works without it....
#set_property IOB TRUE [get_cells "top/RocketChipTop/uarts_0/txm/out_reg"]
#set_property IOB TRUE [get_cells "uart_rx_sync_reg[0]"]
# PCI Express
#FMC 1 refclk
set_property PACKAGE_PIN A10 [get_ports {pci_exp_refclk_rxp}]
set_property PACKAGE_PIN A9 [get_ports {pci_exp_refclk_rxn}]
create_clock -name pcie_ref_clk -period 10 [get_ports pci_exp_refclk_rxp]
set_input_jitter [get_clocks -of_objects [get_ports pci_exp_refclk_rxp]] 0.5
set_property PACKAGE_PIN H4 [get_ports {pci_exp_txp[0]}]
set_property PACKAGE_PIN H3 [get_ports {pci_exp_txn[0]}]
set_property PACKAGE_PIN G6 [get_ports {pci_exp_rxp[0]}]
set_property PACKAGE_PIN G5 [get_ports {pci_exp_rxn[0]}]
# JTAG
set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets jtag_TCK_IBUF]
set_property -dict { PACKAGE_PIN R32 IOSTANDARD LVCMOS18 PULLUP TRUE } [get_ports {jtag_TCK}]
set_property -dict { PACKAGE_PIN W36 IOSTANDARD LVCMOS18 PULLUP TRUE } [get_ports {jtag_TMS}]
set_property -dict { PACKAGE_PIN W37 IOSTANDARD LVCMOS18 PULLUP TRUE } [get_ports {jtag_TDI}]
set_property -dict { PACKAGE_PIN V40 IOSTANDARD LVCMOS18 PULLUP TRUE } [get_ports {jtag_TDO}]
# SDIO
set_property -dict { PACKAGE_PIN AN30 IOSTANDARD LVCMOS18 IOB TRUE } [get_ports {sdio_clk}]
set_property -dict { PACKAGE_PIN AP30 IOSTANDARD LVCMOS18 IOB TRUE PULLUP TRUE } [get_ports {sdio_cmd}]
set_property -dict { PACKAGE_PIN AR30 IOSTANDARD LVCMOS18 IOB TRUE PULLUP TRUE } [get_ports {sdio_dat[0]}]
set_property -dict { PACKAGE_PIN AU31 IOSTANDARD LVCMOS18 IOB TRUE PULLUP TRUE } [get_ports {sdio_dat[1]}]
set_property -dict { PACKAGE_PIN AV31 IOSTANDARD LVCMOS18 IOB TRUE PULLUP TRUE } [get_ports {sdio_dat[2]}]
set_property -dict { PACKAGE_PIN AT30 IOSTANDARD LVCMOS18 IOB TRUE PULLUP TRUE } [get_ports {sdio_dat[3]}]
set_clock_groups -asynchronous \
-group { clk_pll_i } \
-group { \
clk_out1_vc707clk_wiz_sync \
clk_out2_vc707clk_wiz_sync \
clk_out3_vc707clk_wiz_sync \
clk_out4_vc707clk_wiz_sync \
clk_out5_vc707clk_wiz_sync \
clk_out6_vc707clk_wiz_sync \
clk_out7_vc707clk_wiz_sync } \
-group [list [get_clocks -include_generated_clocks -of_objects [get_pins -hier -filter {name =~ *pcie*TXOUTCLK}]]]

4
xilinx/vc707/tcl/board.tcl Normal file
View File

@ -0,0 +1,4 @@
# See LICENSE for license details.
set name {vc707}
set part_fpga {xc7vx485tffg1761-2}
set part_board {xilinx.com:vc707:part0:1.3}

140
xilinx/vc707/tcl/ip.tcl Normal file
View File

@ -0,0 +1,140 @@
# See LICENSE for license details.
#MIG
create_ip -vendor xilinx.com -library ip -name mig_7series -module_name vc707mig -dir $ipdir -force
set migprj [file join $boarddir tcl {mig.prj}]
set_property CONFIG.XML_INPUT_FILE $migprj [get_ips vc707mig]
#AXI_PCIE
create_ip -vendor xilinx.com -library ip -version 2.8 -name axi_pcie -module_name vc707axi_to_pcie_x1 -dir $ipdir -force
set_property -dict [list \
CONFIG.AXIBAR2PCIEBAR_0 {0x60000000} \
CONFIG.AXIBAR2PCIEBAR_1 {0x00000000} \
CONFIG.AXIBAR2PCIEBAR_2 {0x00000000} \
CONFIG.AXIBAR2PCIEBAR_3 {0x00000000} \
CONFIG.AXIBAR2PCIEBAR_4 {0x00000000} \
CONFIG.AXIBAR2PCIEBAR_5 {0x00000000} \
CONFIG.AXIBAR_0 {0x60000000} \
CONFIG.AXIBAR_1 {0xFFFFFFFF} \
CONFIG.AXIBAR_2 {0xFFFFFFFF} \
CONFIG.AXIBAR_3 {0xFFFFFFFF} \
CONFIG.AXIBAR_4 {0xFFFFFFFF} \
CONFIG.AXIBAR_5 {0xFFFFFFFF} \
CONFIG.AXIBAR_AS_0 {true} \
CONFIG.AXIBAR_AS_1 {false} \
CONFIG.AXIBAR_AS_2 {false} \
CONFIG.AXIBAR_AS_3 {false} \
CONFIG.AXIBAR_AS_4 {false} \
CONFIG.AXIBAR_AS_5 {false} \
CONFIG.AXIBAR_HIGHADDR_0 {0x7FFFFFFF} \
CONFIG.AXIBAR_HIGHADDR_1 {0x00000000} \
CONFIG.AXIBAR_HIGHADDR_2 {0x00000000} \
CONFIG.AXIBAR_HIGHADDR_3 {0x00000000} \
CONFIG.AXIBAR_HIGHADDR_4 {0x00000000} \
CONFIG.AXIBAR_HIGHADDR_5 {0x00000000} \
CONFIG.AXIBAR_NUM {1} \
CONFIG.BAR0_ENABLED {true} \
CONFIG.BAR0_SCALE {Gigabytes} \
CONFIG.BAR0_SIZE {4} \
CONFIG.BAR0_TYPE {Memory} \
CONFIG.BAR1_ENABLED {false} \
CONFIG.BAR1_SCALE {N/A} \
CONFIG.BAR1_SIZE {8} \
CONFIG.BAR1_TYPE {N/A} \
CONFIG.BAR2_ENABLED {false} \
CONFIG.BAR2_SCALE {N/A} \
CONFIG.BAR2_SIZE {8} \
CONFIG.BAR2_TYPE {N/A} \
CONFIG.BAR_64BIT {true} \
CONFIG.BASEADDR {0x50000000} \
CONFIG.BASE_CLASS_MENU {Bridge_device} \
CONFIG.CLASS_CODE {0x060400} \
CONFIG.COMP_TIMEOUT {50ms} \
CONFIG.Component_Name {design_1_axi_pcie_1_0} \
CONFIG.DEVICE_ID {0x7111} \
CONFIG.ENABLE_CLASS_CODE {true} \
CONFIG.HIGHADDR {0x53FFFFFF} \
CONFIG.INCLUDE_BAROFFSET_REG {true} \
CONFIG.INCLUDE_RC {Root_Port_of_PCI_Express_Root_Complex} \
CONFIG.INTERRUPT_PIN {false} \
CONFIG.MAX_LINK_SPEED {2.5_GT/s} \
CONFIG.MSI_DECODE_ENABLED {true} \
CONFIG.M_AXI_ADDR_WIDTH {32} \
CONFIG.M_AXI_DATA_WIDTH {64} \
CONFIG.NO_OF_LANES {X1} \
CONFIG.NUM_MSI_REQ {0} \
CONFIG.PCIEBAR2AXIBAR_0_SEC {1} \
CONFIG.PCIEBAR2AXIBAR_0 {0x00000000} \
CONFIG.PCIEBAR2AXIBAR_1 {0xFFFFFFFF} \
CONFIG.PCIEBAR2AXIBAR_1_SEC {1} \
CONFIG.PCIEBAR2AXIBAR_2 {0xFFFFFFFF} \
CONFIG.PCIEBAR2AXIBAR_2_SEC {1} \
CONFIG.PCIE_BLK_LOCN {X1Y1} \
CONFIG.PCIE_USE_MODE {GES_and_Production} \
CONFIG.REF_CLK_FREQ {100_MHz} \
CONFIG.REV_ID {0x00} \
CONFIG.SLOT_CLOCK_CONFIG {true} \
CONFIG.SUBSYSTEM_ID {0x0007} \
CONFIG.SUBSYSTEM_VENDOR_ID {0x10EE} \
CONFIG.SUB_CLASS_INTERFACE_MENU {Host_bridge} \
CONFIG.S_AXI_ADDR_WIDTH {32} \
CONFIG.S_AXI_DATA_WIDTH {64} \
CONFIG.S_AXI_ID_WIDTH {4} \
CONFIG.S_AXI_SUPPORTS_NARROW_BURST {false} \
CONFIG.VENDOR_ID {0x10EE} \
CONFIG.XLNX_REF_BOARD {None} \
CONFIG.axi_aclk_loopback {false} \
CONFIG.en_ext_ch_gt_drp {false} \
CONFIG.en_ext_clk {false} \
CONFIG.en_ext_gt_common {false} \
CONFIG.en_ext_pipe_interface {false} \
CONFIG.en_transceiver_status_ports {false} \
CONFIG.no_slv_err {false} \
CONFIG.rp_bar_hide {true} \
CONFIG.shared_logic_in_core {false} ] [get_ips vc707axi_to_pcie_x1]
#Coreplex clock generator
create_ip -name clk_wiz -vendor xilinx.com -library ip -version 5.3 -module_name vc707clk_wiz_sync -dir $ipdir -force
set_property -dict [list \
CONFIG.CLK_IN1_BOARD_INTERFACE {Custom} \
CONFIG.PRIM_SOURCE {No_buffer} \
CONFIG.CLKOUT2_USED {true} \
CONFIG.CLKOUT3_USED {true} \
CONFIG.CLKOUT4_USED {true} \
CONFIG.CLKOUT5_USED {true} \
CONFIG.CLKOUT6_USED {true} \
CONFIG.CLKOUT7_USED {true} \
CONFIG.CLKOUT1_REQUESTED_OUT_FREQ {12.5} \
CONFIG.CLKOUT2_REQUESTED_OUT_FREQ {25} \
CONFIG.CLKOUT3_REQUESTED_OUT_FREQ {37.5} \
CONFIG.CLKOUT4_REQUESTED_OUT_FREQ {50} \
CONFIG.CLKOUT5_REQUESTED_OUT_FREQ {100} \
CONFIG.CLKOUT6_REQUESTED_OUT_FREQ {150.000} \
CONFIG.CLKOUT7_REQUESTED_OUT_FREQ {75} \
CONFIG.CLK_IN1_BOARD_INTERFACE {Custom} \
CONFIG.PRIM_IN_FREQ {200.000} \
CONFIG.CLKIN1_JITTER_PS {50.0} \
CONFIG.MMCM_DIVCLK_DIVIDE {1} \
CONFIG.MMCM_CLKFBOUT_MULT_F {4.500} \
CONFIG.MMCM_CLKIN1_PERIOD {5.0} \
CONFIG.MMCM_CLKOUT0_DIVIDE_F {72.000} \
CONFIG.MMCM_CLKOUT1_DIVIDE {36} \
CONFIG.MMCM_CLKOUT2_DIVIDE {24} \
CONFIG.MMCM_CLKOUT3_DIVIDE {18} \
CONFIG.MMCM_CLKOUT4_DIVIDE {9} \
CONFIG.MMCM_CLKOUT5_DIVIDE {6} \
CONFIG.MMCM_CLKOUT6_DIVIDE {12} \
CONFIG.NUM_OUT_CLKS {7} \
CONFIG.CLKOUT1_JITTER {168.247} \
CONFIG.CLKOUT1_PHASE_ERROR {91.235} \
CONFIG.CLKOUT2_JITTER {146.624} \
CONFIG.CLKOUT2_PHASE_ERROR {91.235} \
CONFIG.CLKOUT3_JITTER {135.178} \
CONFIG.CLKOUT3_PHASE_ERROR {91.235} \
CONFIG.CLKOUT4_JITTER {127.364} \
CONFIG.CLKOUT4_PHASE_ERROR {91.235} \
CONFIG.CLKOUT5_JITTER {110.629} \
CONFIG.CLKOUT5_PHASE_ERROR {91.235} \
CONFIG.CLKOUT6_JITTER {102.207} \
CONFIG.CLKOUT6_PHASE_ERROR {91.235} \
CONFIG.CLKOUT7_JITTER {117.249} \
CONFIG.CLKOUT7_PHASE_ERROR {91.235}] [get_ips vc707clk_wiz_sync]

202
xilinx/vc707/tcl/mig.prj Normal file
View File

@ -0,0 +1,202 @@
<?xml version='1.0' encoding='UTF-8'?>
<!-- IMPORTANT: This is an internal file that has been generated by the MIG software. Any direct editing or changes made to this file may result in unpredictable behavior or data corruption. It is strongly advised that users do not edit the contents of this file. Re-run the MIG GUI with the required settings if any of the options provided below need to be altered. -->
<Project NoOfControllers="1" >
<ModuleName>vc707mig</ModuleName>
<dci_inouts_inputs>1</dci_inouts_inputs>
<dci_inputs>1</dci_inputs>
<Debug_En>OFF</Debug_En>
<DataDepth_En>1024</DataDepth_En>
<LowPower_En>ON</LowPower_En>
<XADC_En>Enabled</XADC_En>
<TargetFPGA>xc7vx485t-ffg1761/-2</TargetFPGA>
<Version>3.0</Version>
<SystemClock>No Buffer</SystemClock>
<ReferenceClock>Use System Clock</ReferenceClock>
<SysResetPolarity>ACTIVE HIGH</SysResetPolarity>
<BankSelectionFlag>FALSE</BankSelectionFlag>
<InternalVref>0</InternalVref>
<dci_hr_inouts_inputs>50 Ohms</dci_hr_inouts_inputs>
<dci_cascade>0</dci_cascade>
<Controller number="0" >
<MemoryDevice>DDR3_SDRAM/SODIMMs/MT8JTF12864HZ-1G6</MemoryDevice>
<TimePeriod>1250</TimePeriod>
<VccAuxIO>2.0V</VccAuxIO>
<PHYRatio>4:1</PHYRatio>
<InputClkFreq>200</InputClkFreq>
<UIExtraClocks>0</UIExtraClocks>
<MMCM_VCO>800</MMCM_VCO>
<MMCMClkOut0> 1.000</MMCMClkOut0>
<MMCMClkOut1>1</MMCMClkOut1>
<MMCMClkOut2>1</MMCMClkOut2>
<MMCMClkOut3>1</MMCMClkOut3>
<MMCMClkOut4>1</MMCMClkOut4>
<DataWidth>64</DataWidth>
<DeepMemory>1</DeepMemory>
<DataMask>1</DataMask>
<ECC>Disabled</ECC>
<Ordering>Normal</Ordering>
<CustomPart>FALSE</CustomPart>
<NewPartName></NewPartName>
<RowAddress>14</RowAddress>
<ColAddress>10</ColAddress>
<BankAddress>3</BankAddress>
<MemoryVoltage>1.5V</MemoryVoltage>
<UserMemoryAddressMap>BANK_ROW_COLUMN</UserMemoryAddressMap>
<PinSelection>
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="A20" SLEW="FAST" name="ddr3_addr[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="B21" SLEW="FAST" name="ddr3_addr[10]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="B17" SLEW="FAST" name="ddr3_addr[11]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="A15" SLEW="FAST" name="ddr3_addr[12]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="A21" SLEW="FAST" name="ddr3_addr[13]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="B19" SLEW="FAST" name="ddr3_addr[1]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="C20" SLEW="FAST" name="ddr3_addr[2]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="A19" SLEW="FAST" name="ddr3_addr[3]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="A17" SLEW="FAST" name="ddr3_addr[4]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="A16" SLEW="FAST" name="ddr3_addr[5]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="D20" SLEW="FAST" name="ddr3_addr[6]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="C18" SLEW="FAST" name="ddr3_addr[7]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="D17" SLEW="FAST" name="ddr3_addr[8]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="C19" SLEW="FAST" name="ddr3_addr[9]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="D21" SLEW="FAST" name="ddr3_ba[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="C21" SLEW="FAST" name="ddr3_ba[1]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="D18" SLEW="FAST" name="ddr3_ba[2]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="K17" SLEW="FAST" name="ddr3_cas_n" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15" PADName="G18" SLEW="FAST" name="ddr3_ck_n[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15" PADName="H19" SLEW="FAST" name="ddr3_ck_p[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="K19" SLEW="FAST" name="ddr3_cke[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="J17" SLEW="FAST" name="ddr3_cs_n[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="M13" SLEW="FAST" name="ddr3_dm[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="K15" SLEW="FAST" name="ddr3_dm[1]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="F12" SLEW="FAST" name="ddr3_dm[2]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="A14" SLEW="FAST" name="ddr3_dm[3]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="C23" SLEW="FAST" name="ddr3_dm[4]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="D25" SLEW="FAST" name="ddr3_dm[5]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="C31" SLEW="FAST" name="ddr3_dm[6]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="F31" SLEW="FAST" name="ddr3_dm[7]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="N14" SLEW="FAST" name="ddr3_dq[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="H13" SLEW="FAST" name="ddr3_dq[10]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="J13" SLEW="FAST" name="ddr3_dq[11]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="L16" SLEW="FAST" name="ddr3_dq[12]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="L15" SLEW="FAST" name="ddr3_dq[13]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="H14" SLEW="FAST" name="ddr3_dq[14]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="J15" SLEW="FAST" name="ddr3_dq[15]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E15" SLEW="FAST" name="ddr3_dq[16]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E13" SLEW="FAST" name="ddr3_dq[17]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="F15" SLEW="FAST" name="ddr3_dq[18]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E14" SLEW="FAST" name="ddr3_dq[19]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="N13" SLEW="FAST" name="ddr3_dq[1]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="G13" SLEW="FAST" name="ddr3_dq[20]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="G12" SLEW="FAST" name="ddr3_dq[21]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="F14" SLEW="FAST" name="ddr3_dq[22]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="G14" SLEW="FAST" name="ddr3_dq[23]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="B14" SLEW="FAST" name="ddr3_dq[24]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="C13" SLEW="FAST" name="ddr3_dq[25]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="B16" SLEW="FAST" name="ddr3_dq[26]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D15" SLEW="FAST" name="ddr3_dq[27]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D13" SLEW="FAST" name="ddr3_dq[28]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E12" SLEW="FAST" name="ddr3_dq[29]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="L14" SLEW="FAST" name="ddr3_dq[2]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="C16" SLEW="FAST" name="ddr3_dq[30]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D16" SLEW="FAST" name="ddr3_dq[31]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="A24" SLEW="FAST" name="ddr3_dq[32]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="B23" SLEW="FAST" name="ddr3_dq[33]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="B27" SLEW="FAST" name="ddr3_dq[34]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="B26" SLEW="FAST" name="ddr3_dq[35]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="A22" SLEW="FAST" name="ddr3_dq[36]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="B22" SLEW="FAST" name="ddr3_dq[37]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="A25" SLEW="FAST" name="ddr3_dq[38]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="C24" SLEW="FAST" name="ddr3_dq[39]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="M14" SLEW="FAST" name="ddr3_dq[3]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E24" SLEW="FAST" name="ddr3_dq[40]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D23" SLEW="FAST" name="ddr3_dq[41]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D26" SLEW="FAST" name="ddr3_dq[42]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="C25" SLEW="FAST" name="ddr3_dq[43]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E23" SLEW="FAST" name="ddr3_dq[44]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D22" SLEW="FAST" name="ddr3_dq[45]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="F22" SLEW="FAST" name="ddr3_dq[46]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E22" SLEW="FAST" name="ddr3_dq[47]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="A30" SLEW="FAST" name="ddr3_dq[48]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D27" SLEW="FAST" name="ddr3_dq[49]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="M12" SLEW="FAST" name="ddr3_dq[4]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="A29" SLEW="FAST" name="ddr3_dq[50]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="C28" SLEW="FAST" name="ddr3_dq[51]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D28" SLEW="FAST" name="ddr3_dq[52]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="B31" SLEW="FAST" name="ddr3_dq[53]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="A31" SLEW="FAST" name="ddr3_dq[54]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="A32" SLEW="FAST" name="ddr3_dq[55]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E30" SLEW="FAST" name="ddr3_dq[56]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="F29" SLEW="FAST" name="ddr3_dq[57]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="F30" SLEW="FAST" name="ddr3_dq[58]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="F27" SLEW="FAST" name="ddr3_dq[59]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="N15" SLEW="FAST" name="ddr3_dq[5]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="C30" SLEW="FAST" name="ddr3_dq[60]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="E29" SLEW="FAST" name="ddr3_dq[61]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="F26" SLEW="FAST" name="ddr3_dq[62]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="D30" SLEW="FAST" name="ddr3_dq[63]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="M11" SLEW="FAST" name="ddr3_dq[6]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="L12" SLEW="FAST" name="ddr3_dq[7]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="K14" SLEW="FAST" name="ddr3_dq[8]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15_T_DCI" PADName="K13" SLEW="FAST" name="ddr3_dq[9]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="M16" SLEW="FAST" name="ddr3_dqs_n[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="J12" SLEW="FAST" name="ddr3_dqs_n[1]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="G16" SLEW="FAST" name="ddr3_dqs_n[2]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="C14" SLEW="FAST" name="ddr3_dqs_n[3]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="A27" SLEW="FAST" name="ddr3_dqs_n[4]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="E25" SLEW="FAST" name="ddr3_dqs_n[5]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="B29" SLEW="FAST" name="ddr3_dqs_n[6]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="E28" SLEW="FAST" name="ddr3_dqs_n[7]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="N16" SLEW="FAST" name="ddr3_dqs_p[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="K12" SLEW="FAST" name="ddr3_dqs_p[1]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="H16" SLEW="FAST" name="ddr3_dqs_p[2]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="C15" SLEW="FAST" name="ddr3_dqs_p[3]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="A26" SLEW="FAST" name="ddr3_dqs_p[4]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="F25" SLEW="FAST" name="ddr3_dqs_p[5]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="B28" SLEW="FAST" name="ddr3_dqs_p[6]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="DIFF_SSTL15_T_DCI" PADName="E27" SLEW="FAST" name="ddr3_dqs_p[7]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="H20" SLEW="FAST" name="ddr3_odt[0]" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="E20" SLEW="FAST" name="ddr3_ras_n" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="LVCMOS15" PADName="C29" SLEW="FAST" name="ddr3_reset_n" IN_TERM="" />
<Pin VCCAUX_IO="HIGH" IOSTANDARD="SSTL15" PADName="F20" SLEW="FAST" name="ddr3_we_n" IN_TERM="" />
</PinSelection>
<System_Clock>
<Pin PADName="E19/E18(CC_P/N)" Bank="38" name="sys_clk_p/n" />
</System_Clock>
<System_Control>
<Pin PADName="AV40" Bank="15" name="sys_rst" />
<Pin PADName="No connect" Bank="Select Bank" name="init_calib_complete" />
<Pin PADName="No connect" Bank="Select Bank" name="tg_compare_error" />
</System_Control>
<TimingParameters>
<Parameters twtr="7.5" trrd="6" trefi="7.8" tfaw="30" trtp="7.5" tcke="5" trfc="110" trp="13.75" tras="35" trcd="13.75" />
</TimingParameters>
<mrBurstLength name="Burst Length" >8 - Fixed</mrBurstLength>
<mrBurstType name="Read Burst Type and Length" >Sequential</mrBurstType>
<mrCasLatency name="CAS Latency" >11</mrCasLatency>
<mrMode name="Mode" >Normal</mrMode>
<mrDllReset name="DLL Reset" >No</mrDllReset>
<mrPdMode name="DLL control for precharge PD" >Slow Exit</mrPdMode>
<emrDllEnable name="DLL Enable" >Enable</emrDllEnable>
<emrOutputDriveStrength name="Output Driver Impedance Control" >RZQ/7</emrOutputDriveStrength>
<emrMirrorSelection name="Address Mirroring" >Disable</emrMirrorSelection>
<emrCSSelection name="Controller Chip Select Pin" >Enable</emrCSSelection>
<emrRTT name="RTT (nominal) - On Die Termination (ODT)" >RZQ/6</emrRTT>
<emrPosted name="Additive Latency (AL)" >0</emrPosted>
<emrOCD name="Write Leveling Enable" >Disabled</emrOCD>
<emrDQS name="TDQS enable" >Enabled</emrDQS>
<emrRDQS name="Qoff" >Output Buffer Enabled</emrRDQS>
<mr2PartialArraySelfRefresh name="Partial-Array Self Refresh" >Full Array</mr2PartialArraySelfRefresh>
<mr2CasWriteLatency name="CAS write latency" >8</mr2CasWriteLatency>
<mr2AutoSelfRefresh name="Auto Self Refresh" >Enabled</mr2AutoSelfRefresh>
<mr2SelfRefreshTempRange name="High Temparature Self Refresh Rate" >Normal</mr2SelfRefreshTempRange>
<mr2RTTWR name="RTT_WR - Dynamic On Die Termination (ODT)" >Dynamic ODT off</mr2RTTWR>
<PortInterface>AXI</PortInterface>
<AXIParameters>
<C0_C_RD_WR_ARB_ALGORITHM>RD_PRI_REG</C0_C_RD_WR_ARB_ALGORITHM>
<C0_S_AXI_ADDR_WIDTH>30</C0_S_AXI_ADDR_WIDTH>
<C0_S_AXI_DATA_WIDTH>64</C0_S_AXI_DATA_WIDTH>
<C0_S_AXI_ID_WIDTH>4</C0_S_AXI_ID_WIDTH>
<C0_S_AXI_SUPPORTS_NARROW_BURST>0</C0_S_AXI_SUPPORTS_NARROW_BURST>
</AXIParameters>
</Controller>
</Project>

59
xilinx/vc707/vsrc/sdio.v Normal file
View File

@ -0,0 +1,59 @@
// See LICENSE for license details.
`timescale 1ns/1ps
`default_nettype none
module sdio_spi_bridge (
input wire clk,
input wire reset,
// SDIO
inout wire sd_cmd,
inout wire [3:0] sd_dat,
output wire sd_sck,
// QUAD SPI
input wire spi_sck,
input wire [3:0] spi_dq_o,
output wire [3:0] spi_dq_i,
output wire spi_cs
);
wire mosi, miso;
reg miso_sync [1:0];
assign mosi = spi_dq_o[0];
assign spi_dq_i = {2'b00, miso_sync[1], 1'b0};
assign sd_sck = spi_sck;
IOBUF buf_cmd (
.IO(sd_cmd),
.I(mosi),
.O(),
.T(1'b0)
);
IOBUF buf_dat0 (
.IO(sd_dat[0]),
.I(),
.O(miso),
.T(1'b1)
);
IOBUF buf_dat3 (
.IO(sd_dat[3]),
.I(spi_cs),
.O(),
.T(1'b0)
);
always @(posedge clk) begin
if (reset) begin
miso_sync[0] <= 1'b0;
miso_sync[1] <= 1'b0;
end else begin
miso_sync[0] <= miso;
miso_sync[1] <= miso_sync[0];
end
end
endmodule
`default_nettype wire

78
xilinx/vc707/vsrc/vc707reset.v Normal file
View File

@ -0,0 +1,78 @@
// See LICENSE for license details.
`timescale 1ns/1ps
`default_nettype none
`define RESET_SYNC 4
`define DEBOUNCE_BITS 8
module vc707reset(
// Asynchronous reset input, should be held high until
// all clocks are locked and power is stable.
input wire areset,
// Clock domains are brought up in increasing order
// All clocks are reset for at least 2^DEBOUNCE_BITS * period(clock1)
input wire clock1,
output wire reset1,
input wire clock2,
output wire reset2,
input wire clock3,
output wire reset3,
input wire clock4,
output wire reset4
);
sifive_reset_hold hold_clock0(areset, clock1, reset1);
sifive_reset_sync sync_clock2(reset1, clock2, reset2);
sifive_reset_sync sync_clock3(reset2, clock3, reset3);
sifive_reset_sync sync_clock4(reset3, clock4, reset4);
endmodule
// Assumes that areset is held for more than one clock
// Allows areset to be deasserted asynchronously
module sifive_reset_sync(
input wire areset,
input wire clock,
output wire reset
);
reg [`RESET_SYNC-1:0] gen_reset = {`RESET_SYNC{1'b1}};
always @(posedge clock, posedge areset) begin
if (areset) begin
gen_reset <= {`RESET_SYNC{1'b1}};
end else begin
gen_reset <= {1'b0,gen_reset[`RESET_SYNC-1:1]};
end
end
assign reset = gen_reset[0];
endmodule
module sifive_reset_hold(
input wire areset,
input wire clock,
output wire reset
);
wire raw_reset;
reg [`RESET_SYNC-1:0] sync_reset = {`RESET_SYNC{1'b1}};
reg [`DEBOUNCE_BITS:0] debounce_reset = {`DEBOUNCE_BITS{1'b1}};
wire out_reset;
// Captures reset even if clock is not running
sifive_reset_sync capture(areset, clock, raw_reset);
// Remove any glitches due to runt areset
always @(posedge clock) begin
sync_reset <= {raw_reset,sync_reset[`RESET_SYNC-1:1]};
end
// Debounce the reset
assign out_reset = debounce_reset[`DEBOUNCE_BITS];
always @(posedge clock) begin
if (sync_reset[0]) begin
debounce_reset <= {(`DEBOUNCE_BITS+1){1'b1}};
end else begin
debounce_reset <= debounce_reset - out_reset;
end
end
assign reset = out_reset;
endmodule
`default_nettype wire