1
0
Commit Graph

594 Commits

Author SHA1 Message Date
Colin Schmidt
c1b5f71ee7 don't run bmarks in parallel 2016-02-22 13:34:24 -08:00
Colin Schmidt
4ce603e548 Memtest configs should not have a hex file loaded 2016-02-22 12:49:26 -08:00
Colin Schmidt
43c2237ef7 add more memtest configs and remove channel test 2016-02-22 09:38:44 -08:00
Colin Schmidt
0c575403af only use a single asm test and 1 bmark for memtest 2016-02-22 09:36:53 -08:00
Colin Schmidt
e4c4a90648 add a config to travis for memchannel mux select 2016-02-22 09:36:53 -08:00
Colin Schmidt
3dae576c9e add travis configs for memtest 2016-02-22 09:36:53 -08:00
Howard Mao
4fedd180ee bump uncore and groundtest 2016-02-19 23:31:09 -08:00
Howard Mao
85cc632d5d fix emulator debug build 2016-02-19 23:13:57 -08:00
Howard Mao
5e4a02038c move FPGA AXI to HTIF converter into Chisel module 2016-02-19 13:53:31 -08:00
Palmer Dabbelt
926efd0cab Allow the number of memory channels to be picked at runtime
We're building a chip with 8 memory channels.  Since this will require a
complicated test setup we want to also be able to bring up the chip with fewer
memory channels.  This commit adds a SCR that controls the number of active
memory channels on a chip.  Toggling this SCR will scramble memory and drop
Nasti messages, so it's only possible to change while the chip is booting.

By default this just adds a 1-bit SCR, which essentially no extra logic.

When multiple memory channel configurations are enabled at elaboration time, a
NastiMemoryInterconnect is generated for each channel configuration.  The
number of outstanding misses is increased to coorespond to the maximum number
of banks per memory channel (added as a parameter), which I believe is
necessary to avoid deadlock in the memory system.

A configuration is added that supports 8 memory channels but has only 1 enabled
by default.
2016-02-17 15:23:30 -08:00
Palmer Dabbelt
95b065153d Add CDE to the submodule list
Without this I don't get rebuilds when toching a file in CDE.
2016-02-17 15:23:25 -08:00
Palmer Dabbelt
db9de94588 Generate and use SCR address header files
This uses the new SCRFile changes to generate a header file containing a list
of all the SCRs in a core to remove the magic constant "63" (the HTIF clock
divider control register) and replace it with a generated number (which is
still 63).
2016-02-17 15:23:18 -08:00
Christopher Celio
8687ce5ebd bump torture 2016-02-16 15:13:59 -08:00
Christopher Celio
2e15d92d18 bump torture 2016-02-16 14:24:31 -08:00
Christopher Celio
c1b4d9372f Revert "add new parameters for new SCR file"
This reverts commit 4dad5b8b32.

The commit breaks the build.
2016-02-13 04:02:20 -08:00
Christopher Celio
6c6bbca92a Revert "use singleton for global"
This reverts commit 4d0f941de3.

The commit breaks the build.
2016-02-13 03:56:47 -08:00
John Wright
4d0f941de3 use singleton for global 2016-02-13 00:56:11 -08:00
John Wright
4dad5b8b32 add new parameters for new SCR file 2016-02-12 18:24:12 -08:00
Howard Mao
9fb2216548 get rid of unused external mmio port 2016-02-10 21:49:02 -08:00
Howard Mao
4b95374f0c bump rocket for bug fixes 2016-02-10 11:12:48 -08:00
Howard Mao
72a876bfba add NASTI to TL converter 2016-02-10 11:12:39 -08:00
Palmer Dabbelt
96b77f399c Merge pull request #43 from ucb-bar/chisel3
Bump junctions, for a chisel3 fix
2016-02-08 14:42:06 -08:00
Palmer Dabbelt
98baf401a6 Bump junctions, for a chisel3 fix 2016-02-08 13:33:05 -08:00
Andrew Waterman
70945953a8 Merge pull request #42 from ucb-bar/chisel3
Chisel 3 support
2016-02-05 16:01:35 -08:00
Palmer Dabbelt
b2ed35e8aa Print a better error on missing config classes
Without this you don't actually see what config class you tried to use, which
makes it hard to grep around Makefiles to see why things are broken.
2016-02-05 09:59:02 -08:00
Palmer Dabbelt
8422aaf6fc Add a "/" when targetDir doesn't have one
This isn't Chisel 3 specific, but that's what I happened to do in the Chisel 3
Driver wrapper.
2016-02-05 09:57:47 -08:00
Palmer Dabbelt
3bb0f11e6c Chisel3 <> reverse fix 2016-02-05 09:56:42 -08:00
Colin Schmidt
c944193e16 add dma configs to travis 2016-02-02 16:06:01 -08:00
Howard Mao
06c3f9b655 Rocket Chip fixes in response to lowRISC team's comments
* DMA frontend-backend communication tunneled over TileLink/AXI
 * Split MMIO and Mem requests in l1tol2net instead of in AXI interconnect
 * Don't make NIOMSHRs configurable. Fixed at 1.
 * Connect accelerator-internal CSRs into the CSR file
 * Make mtvec register configurable and writeable
2016-02-02 13:14:52 -08:00
Palmer Dabbelt
97640f099d Merge pull request #41 from ucb-bar/regressions
Support torture regressions
2016-02-01 18:39:28 -08:00
Palmer Dabbelt
5cea4edee2 Bump riscv-tools for torture NaN ISA change 2016-01-31 23:06:59 -08:00
Palmer Dabbelt
e18759642f Avoid running Chisel in parallel in the same directory
It looks like Chisel fails when I try to run it in parallel.  This adds a lock
file to ensure that only a single Chisel instance is running at a time when
running the regressions.
2016-01-31 23:06:59 -08:00
Palmer Dabbelt
00465b15c3 Allow the regression Makefile to clean all targets 2016-01-31 23:06:59 -08:00
Palmer Dabbelt
c9a2b7d109 Add torture as part of the regression
Since the latest Spike fix my torture runs are succeeding, so I can now run it
as part of the regression flow.
2016-01-31 23:06:59 -08:00
Palmer Dabbelt
e185fe6850 Add targets for emulator and fsim regressions
This change allows the other simulation targets (the emulator and the FPGA
simulator) to be run just like the Verilog simulator could be before.
2016-01-31 23:06:59 -08:00
Andrew Waterman
7e9d8c7256 Merge pull request #40 from ucb-bar/make-3.82
Support make-3.82 and newer
2016-01-28 14:28:27 -08:00
Palmer Dabbelt
1149a412cc Support make-3.82 and newer
make changed its priorties for resolving implicit rules, which causes different
behavior when running "make run-bmark-tests".  This patch changes the hex file
rules to ensure they match between the two versions of make.

I've tried this with both make-3.81 and make-4.1, and they both work for me.
2016-01-28 12:19:11 -08:00
Palmer Dabbelt
7209c13338 Move to a regression Makefile
In order to have the buildbot support various types of failures it needs
to run different commands.  Rather than modifying the regression script
to have a bunch of arguments I've just gone and made a makefile for
regressions instead.

This doesn't run torture right now because that's broken, but I'll add
support soon.
2016-01-26 22:50:49 -08:00
Howard Mao
ff79a44eb0 move some utility code from uncore to junctions 2016-01-21 15:39:09 -08:00
Andrew Waterman
fdd19145e9 bump chisel/hardfloat/junctions/uncore submodules 2016-01-17 01:50:04 -08:00
Howard Mao
04fd407c3e bump rocket submodule pointer 2016-01-15 15:29:23 -08:00
Howard Mao
3b4b7126ed Chisel3 compile-time deprecations should be runtime errors 2016-01-14 15:12:41 -08:00
Howard Mao
33aa64212d fix more Chisel3 deprecations 2016-01-14 15:06:30 -08:00
Andrew Waterman
fc638c6339 Chisel3 compatibility fixes 2016-01-12 16:28:05 -08:00
Andrew Waterman
603db5e271 Chisel3 compatibility; new NaNs; new MIPI behavior 2016-01-12 16:25:03 -08:00
Howard Mao
c06884b78c lowercase SMI to Smi 2016-01-11 17:44:10 -08:00
Colin Schmidt
8d1afa4197 bump fpga repo 2016-01-09 17:50:29 -08:00
Howard Mao
806e40d19b implement DMA streaming functionality 2016-01-07 19:26:15 -08:00
Howard Mao
2f71a3da5a bump up submodule commits to merge commits
Github's PR system doesn't work so well with submodules, since it always
creates merge commits. We should probably avoid using it in the future.
2015-12-22 08:09:24 -08:00
Howard Mao
0f51ca4c10 Merge pull request #35 from ucb-bar/dma
Implement DMA unit
2015-12-22 10:33:59 -05:00