Merge pull request #247 from ucb-bar/replseqmem_pr

Bump FIRRTL for Sequential Memories

firrtl

@@ -1 +1 @@
-Subproject commit a2af16c1fb1f5166eab34188df9944012da3cbc3
+Subproject commit 6a05468ed0ece1ace3019666b16f2ae83ef76ef9

vsim/Makefile

@@ -11,7 +11,8 @@ default: all
 
 base_dir = $(abspath ..)
 generated_dir = $(abspath ./generated-src)
-mem_gen = $(base_dir)/vsim/vlsi_mem_gen
+VLSI_MEM_GEN ?= $(base_dir)/vsim/vlsi_mem_gen
+mem_gen = $(VLSI_MEM_GEN)
 sim_dir = .
 output_dir = $(sim_dir)/output
 

vsim/Makefrag

@@ -10,6 +10,7 @@ bb_vsrcs = $(base_dir)/vsrc/DebugTransportModuleJtag.v \
 
 sim_vsrcs = \
 	$(generated_dir)/$(MODEL).$(CONFIG).v \
+	$(generated_dir)/$(MODEL).$(CONFIG).behav_srams.v \
 	$(generated_dir)/consts.$(CONFIG).vh \
 	$(base_dir)/vsrc/$(TB).v \
 	$(base_dir)/vsrc/SimDTM.v \

vsim/Makefrag-verilog

@@ -9,9 +9,15 @@ $(generated_dir)/%.$(CONFIG).fir $(generated_dir)/%.$(CONFIG).d $(generated_dir)
 	mkdir -p $(dir $@)
 	cd $(base_dir) && $(SBT) "run $(generated_dir) $(PROJECT) $(notdir $*) $(CFG_PROJECT) $(CONFIG)"
 
-$(generated_dir)/%.v: $(generated_dir)/%.fir $(FIRRTL_JAR)
+$(generated_dir)/%.v $(generated_dir)/%.conf : $(generated_dir)/%.fir $(FIRRTL_JAR)
 	mkdir -p $(dir $@)
-	$(FIRRTL) -i $< -o $@ -X verilog
+	$(FIRRTL) -i $< -o $@ -X verilog --replSeqMem -c:$(MODEL):-o:$(generated_dir)/$(MODEL).$(CONFIG).conf
+
+$(generated_dir)/$(MODEL).$(CONFIG).behav_srams.v : $(generated_dir)/$(MODEL).$(CONFIG).conf $(mem_gen)
+	cd $(generated_dir) && \
+	rm -f $@ && \
+	$(mem_gen) $(generated_dir)/$(MODEL).$(CONFIG).conf >> $@.tmp && \
+	mv $@.tmp $@
 
 $(generated_dir)/consts.$(CONFIG).vh: $(generated_dir)/$(MODEL).$(CONFIG).prm
 	echo "\`ifndef CONST_VH" > $@

vsim/vlsi_mem_gen

@@ -12,7 +12,7 @@ def parse_line(line):
   width = 0
   depth = 0
   ports = ''
-  mask_gran = 1
+  mask_gran = 0
   tokens = line.split()
   i = 0
   for i in range(0,len(tokens),2):
@@ -21,20 +21,20 @@ def parse_line(line):
       name = tokens[i+1]
     elif s == 'width':
       width = int(tokens[i+1])
+      mask_gran = width # default setting
     elif s == 'depth':
       depth = int(tokens[i+1])
     elif s == 'ports':
       ports = tokens[i+1].split(',')
     elif s == 'mask_gran':
-      # currently used only for fpga, but here for .conf format compatability
       mask_gran = int(tokens[i+1])
     else:
       sys.exit('%s: unknown argument %s' % (sys.argv[0], a))
-  return (name, width, depth, ports)
+  return (name, width, depth, mask_gran, width/mask_gran, ports)
 
-def gen_mem(name, width, depth, ports):
+def gen_mem(name, width, depth, mask_gran, mask_seg, ports):
   addr_width = max(math.ceil(math.log(depth)/math.log(2)),1)
-  port_spec = ['input CLK', 'input RST', 'input init']
+  port_spec = []
   readports = []
   writeports = []
   latchports = []
@@ -50,28 +50,34 @@ def gen_mem(name, width, depth, ports):
       maskedports[pid] = pid
 
     if ptype == 'read':
-      port_spec.append('input [%d:0] R%dA' % (addr_width-1, pid))
+      prefix = 'R%d_' % len(readports)
-      port_spec.append('input R%dE' % pid)
+      port_spec.append('input %sclk' % prefix)
-      port_spec.append('output [%d:0] R%dO' % (width-1, pid))
+      port_spec.append('input [%d:0] %saddr' % (addr_width-1, prefix))
+      port_spec.append('input %sen' % prefix)
+      port_spec.append('output [%d:0] %sdata' % (width-1, prefix))
       readports.append(pid)
     elif ptype == 'write':
-      port_spec.append('input [%d:0] W%dA' % (addr_width-1, pid))
+      prefix = 'W%d_' % len(writeports)
-      port_spec.append('input W%dE' % pid)
+      port_spec.append('input %sclk' % prefix)
-      port_spec.append('input [%d:0] W%dI' % (width-1, pid))
+      port_spec.append('input [%d:0] %saddr' % (addr_width-1, prefix))
+      port_spec.append('input %sen' % prefix)
+      port_spec.append('input [%d:0] %sdata' % (width-1, prefix))
       if pid in maskedports:
-        port_spec.append('input [%d:0] W%dM' % (width-1, pid))
+        port_spec.append('input [%d:0] %smask' % (mask_seg-1, prefix))
       if not use_latches or pid in maskedports:
         writeports.append(pid)
       else:
         latchports.append(pid)
     elif ptype == 'rw':
-      port_spec.append('input [%d:0] RW%dA' % (addr_width-1, pid))
+      prefix = 'RW%d_' % len(rwports)
-      port_spec.append('input RW%dE' % pid)
+      port_spec.append('input %sclk' % prefix)
-      port_spec.append('input RW%dW' % pid)
+      port_spec.append('input [%d:0] %saddr' % (addr_width-1, prefix))
+      port_spec.append('input %sen' % prefix)
+      port_spec.append('input %swmode' % prefix)
       if pid in maskedports:
-        port_spec.append('input [%d:0] RW%dM' % (width-1, pid))
+        port_spec.append('input [%d:0] %swmask' % (mask_seg-1, prefix))
-      port_spec.append('input [%d:0] RW%dI' % (width-1, pid))
+      port_spec.append('input [%d:0] %swdata' % (width-1, prefix))
-      port_spec.append('output [%d:0] RW%dO' % (width-1, pid))
+      port_spec.append('output [%d:0] %srdata' % (width-1, prefix))
       rwports.append(pid)
     else:
       sys.exit('%s: unknown port type %s' % (sys.argv[0], ptype))
@@ -82,66 +88,83 @@ def gen_mem(name, width, depth, ports):
   masked = len(maskedports)>0
   tup = (depth, width, nr, nw, nrw, masked)
 
-  for pid in readports:
+  for idx in range(nr):
-    decl.append('reg [%d:0] reg_R%dA;' % (addr_width-1, pid))
+    prefix = 'R%d_' % idx
-    sequential.append('if (R%dE) reg_R%dA <= R%dA;' % (pid, pid, pid))
+    decl.append('reg [%d:0] reg_%saddr;' % (addr_width-1, prefix))
-    combinational.append('assign R%dO = ram[reg_R%dA];' % (pid, pid))
+    sequential.append('always @(posedge %sclk)' % prefix)
+    sequential.append('  if (%sen) reg_%saddr <= %saddr;' % (prefix, prefix, prefix))
+    combinational.append('assign %sdata = ram[reg_%saddr];' % (prefix, prefix))
 
-  for pid in rwports:
+  for idx in range(nrw):
-    decl.append('reg [%d:0] reg_RW%dA;' % (addr_width-1, pid))
+    prefix = 'RW%d_' % idx
-    sequential.append('if (RW%dE && !RW%dW) reg_RW%dA <= RW%dA;' % (pid, pid, pid, pid))
+    decl.append('reg [%d:0] reg_%saddr;' % (addr_width-1, prefix))
-    combinational.append('assign RW%dO = ram[reg_RW%dA];' % (pid, pid))
+    sequential.append('always @(posedge %sclk)' % prefix)
+    sequential.append('  if (%sen && !%swmode) reg_%saddr <= %saddr;' % (prefix, prefix, prefix, prefix))
+    combinational.append('assign %srdata = ram[reg_%saddr];' % (prefix, prefix))
 
-  for pid in latchports:
+  for idx in range(len(latchports)):
-    decl.append('reg [%d:0] latch_W%dA;' % (addr_width-1, pid))
+    prefix = 'W%d_' % idx
-    decl.append('reg [%d:0] latch_W%dI;' % (width-1, pid))
+    decl.append('reg [%d:0] latch_%saddr;' % (addr_width-1, prefix))
-    decl.append('reg latch_W%dE;' % (pid))
+    decl.append('reg [%d:0] latch_%sdata;' % (width-1, prefix))
+    decl.append('reg latch_%sen;' % (prefix))
     combinational.append('always @(*) begin')
-    combinational.append('  if (!CLK && W%dE) latch_W%dA <= W%dA;' % (pid, pid, pid))
+    combinational.append('  if (!%sclk && %sen) latch_%saddr <= %saddr;' % (prefix, prefix, prefix, prefix))
-    combinational.append('  if (!CLK && W%dE) latch_W%dI <= W%dI;' % (pid, pid, pid))
+    combinational.append('  if (!%sclk && %sen) latch_%sdata <= %sdata;' % (prefix, prefix, prefix, prefix))
-    combinational.append('  if (!CLK) latch_W%dE <= W%dE;' % (pid, pid))
+    combinational.append('  if (!%sclk) latch_%sen <= %sen;' % (prefix, prefix, prefix))
     combinational.append('end')
     combinational.append('always @(*)')
-    combinational.append('  if (CLK && latch_W%dE)' % (pid))
+    combinational.append('  if (%sclk && latch_%sen)' % (prefix, prefix))
-    combinational.append('    ram[latch_W%dA] <= latch_W%dI;' % (pid, pid))
+    combinational.append('    ram[latch_%saddr] <= latch_%sdata;' % (prefix, prefix))
 
   decl.append('reg [%d:0] ram [%d:0];' % (width-1, depth-1))
-  decl.append('`ifndef SYNTHESIS')
+  decl.append('`ifdef RANDOMIZE')
   decl.append('  integer initvar;')
   decl.append('  initial begin')
   decl.append('    #0.002;')
   decl.append('    for (initvar = 0; initvar < %d; initvar = initvar+1)' % depth)
   decl.append('      ram[initvar] = {%d {$random}};' % ((width-1)/32+1))
-  for pid in readports:
+  for idx in range(nr):
-    decl.append('    reg_R%dA = {%d {$random}};' % (pid, ((addr_width-1)/32+1)))
+    prefix = 'R%d_' % idx
-  for pid in rwports:
+    decl.append('    reg_%saddr = {%d {$random}};' % (prefix, ((addr_width-1)/32+1)))
-    decl.append('    reg_RW%dA = {%d {$random}};' % (pid, ((addr_width-1)/32+1)))
+  for idx in range(nrw):
+    prefix = 'RW%d_' % idx
+    decl.append('    reg_%saddr = {%d {$random}};' % (prefix, ((addr_width-1)/32+1)))
   decl.append('  end')
   decl.append('`endif')
 
   decl.append("integer i;")
-  sequential.append("for (i = 0; i < %d; i=i+1) begin" % width)
+  for idx in range(nw):
-  for pid in writeports:
+    prefix = 'W%d_' % idx
-    mask = (' && W%dM[i]' % pid) if pid in maskedports else ''
+    pid = writeports[idx]
-    sequential.append("  if (W%dE%s) ram[W%dA][i] <= W%dI[i];" % (pid, mask, pid, pid))
+    sequential.append('always @(posedge %sclk)' % prefix)
-  for pid in rwports:
+    sequential.append("  if (%sen) begin" % prefix)
-    mask = (' && RW%dM[i]' % pid) if pid in maskedports else ''
+    for i in range(mask_seg):
-    sequential.append("  if (RW%dE && RW%dW%s) ram[RW%dA][i] <= RW%dI[i];" % (pid, pid, mask, pid, pid))
+      mask = ('if (%smask[%d]) ' % (prefix, i)) if pid in maskedports else ''
-  sequential.append("end")
+      ram_range = '%d:%d' % ((i+1)*mask_gran-1, i*mask_gran)
+      sequential.append("    %sram[%saddr][%s] <= %sdata[%s];" % (mask, prefix, ram_range, prefix, ram_range))
+    sequential.append("  end")
+  for idx in range(nrw):
+    pid = rwports[idx]
+    prefix = 'RW%d_' % idx
+    sequential.append('always @(posedge %sclk)' % prefix)
+    sequential.append("  if (%sen && %swmode) begin" % (prefix, prefix))
+    for i in range(mask_seg):
+      mask = ('if (%swmask[%d]) ' % (prefix, i)) if pid in maskedports else ''
+      ram_range = '%d:%d' % ((i+1)*mask_gran-1, i*mask_gran)
+      sequential.append("    %sram[%saddr][%s] <= %swdata[%s];" % (mask, prefix, ram_range, prefix, ram_range))
+    sequential.append("  end")
   body = "\
   %s\n\
-  always @(posedge CLK) begin\n\
+  %s\n\
-    %s\n\
+  %s\n" % ('\n  '.join(decl), '\n  '.join(sequential), '\n  '.join(combinational))
-  end\n\
-  %s\n" % ('\n  '.join(decl), '\n    '.join(sequential), '\n  '.join(combinational))
 
-  s = "module %s(\n\
+  s = "\nmodule %s(\n\
   %s\n\
 );\n\
 \n\
 %s\
 \n\
-endmodule\n" % (name, ',\n  '.join(port_spec), body)
+endmodule" % (name, ',\n  '.join(port_spec), body)
   return s
 
 def main():