1
0
Commit Graph

8 Commits

Author SHA1 Message Date
Howard Mao
a7f79aa409 get rid of TileLinkMemorySelector 2016-09-04 10:55:19 -07:00
Howard Mao
f0ab6d0214 tie off finish signals in tilelink wrapper and unwrapper 2016-09-04 10:55:19 -07:00
Jim Lawson
dc9ae19936 Work-around for current Scala compiler "structural type loses implicits".
Running rocket-chip through the chisel3 gsdt branch which supports stricter connection checks and uses implicit definitions to deal with "old" direction overrides, exposed a possible bug in the Scala compiler.

    [error] .../src/main/scala/uncore/devices/Prci.scala:27: value asOutput is not a member of uncore.devices.PRCIInterrupts{val mtip: chisel3.core.Bool; val msip: chisel3.core.Bool}
    [error] possible cause: maybe a semicolon is missing before `value asOutput'?
    [error]   }.asOutput
    [error]     ^
    [error] one error found
    [error] (uncore/compile:compileIncremental) Compilation failed

This change isn't strictly required for current chisel3 code, but is being submitted in anticipation of an eventual merge of the gsdt branch prior to a compiler fix.
2016-09-02 15:38:18 -07:00
Andrew Waterman
e23e4d6de5 Add ClientUncachedTileLinkEnqueuer utility 2016-09-02 15:27:54 -07:00
Andrew Waterman
7aeb42fa55 Allow narrow TL interface on PRCI; make mtime writable 2016-09-02 15:27:54 -07:00
Megan Wachs
3dd51ff734 This commit adds Logic & test support for JTAG implementation of Debug Transport Module.
- The DebugTransportModuleJtag is written in Verilog. It probably could be written in
  Chisel except for some negative edge clocking requirement.
- For real implementations, the AsyncDebugBusTo/From is insufficient. This commit
  includes cases where they are used, but because they are not reset asynchronously,
  a Verilog 'AsyncMailbox' is used when p(AsyncDebug) is false.
- This commit differs significantly from the earlier attempt. Now, the
  DTM and synchronizer is instantiated within Top, as it is a real piece of
  hardware (vs. test infrastructure).
-TestHarness takes a parameter vs. creating an entirely new TestHarness class.
It does not make sense to instantiate TestHarness when p(IncludeJtagDTM) is false,
and it would not make sense to insantiate some other TestHarness if p(IncludeJtagDTM)
is true.

To build Verilog which includes the JtagDTM within Top:

make CONFIG=WithJtagDTM_...

To test using gdb->OpenOCD->jtag_vpi->Verilog:

First, install openocd (included in this commit)

./bootstrap
./configure --prefix=$OPENOCD --enable-jtag-vpi
make
make install

Then to run a simulation:

On a 32-bit core:

$(ROCKETCHIP)/riscv-tools/riscv-tests/debug/gdbserver.py \
  --run ./simv-TestHarness-WithJtagDTM_... \
  --cmd="$OPENOCD/bin/openocd --s $OPENOCD/share/openocd/scripts/" \
  --freedom-e300-sim \
  SimpleRegisterTest.test_s0

On a 64-bit core:

$(ROCKETCHIP)/riscv-tools/riscv-tests/debug/gdbserver.py \
  --run ./simv-TestHarness-WithJtagDTM_... \
  --cmd="$OPENOCD/bin/openocd --s $OPENOCD/share/openocd/scripts/" \
  --freedom-u500-sim \
  SimpleRegisterTest.test_s0
2016-08-19 16:08:31 -07:00
Megan Wachs
dd4a50c452 Add JTAG DTM and test support in simulation
Initial cut

checkpoint which compiles and runs but there is some off-by-1 in the protocol

Debugging the clock crossing logic

checkpoint which works

Clean up the AsyncMailbox black box
2016-08-19 16:08:17 -07:00
Howard Mao
7b20609d4d reorganize moving non-submodule packages into src/main/scala 2016-08-19 13:45:23 -07:00