1
0

debug: Make DMI NOPs really NOPs.

This simplifies SW design and CDC issues.
This commit is contained in:
Megan Wachs 2017-04-19 13:17:22 -07:00
parent 67404a665b
commit 0c013a56c0
2 changed files with 32 additions and 25 deletions

View File

@ -83,8 +83,11 @@ class DebugTransportModuleJTAG(debugAddrBits: Int, c: JtagDTMConfig)
val busy = Wire(Bool())
val nonzeroResp = Wire(Bool())
val busyResp = Wire(new DMIAccessCapture(debugAddrBits))
val busyResp = Wire(new DMIAccessCapture(debugAddrBits))
val nonbusyResp = Wire(new DMIAccessCapture(debugAddrBits))
val dmiResp = Wire(new DMIAccessCapture(debugAddrBits))
val nopResp = Wire(new DMIAccessCapture(debugAddrBits))
val dmiReqReg = Reg(new DMIReq(debugAddrBits))
val dmiReqValidReg = Reg(init = Bool(false));
@ -156,20 +159,29 @@ class DebugTransportModuleJTAG(debugAddrBits: Int, c: JtagDTMConfig)
// Especially for the first request, we must consider dtmResp.valid,
// so that we don't consider junk in the FIFO to be an error response.
// The current specification says that any non-zero response is an error.
// But there is actually no case in the current design where you SHOULD get an error,
// as we haven't implemented Bus Masters or Serial Ports, which are the only cases errors
// can occur.
nonzeroResp := stickyNonzeroRespReg | (io.dmi.resp.valid & (io.dmi.resp.bits.resp != UInt(0)))
assert(!nonzeroResp, "There is no reason to get a non zero response in the current system.");
assert(!stickyNonzeroRespReg, "There is no reason to have a sticky non zero response in the current system.");
busyResp.addr := UInt(0)
busyResp.resp := -1.S(DMIConsts.dmiRespSize.W).asUInt // Generalizing busy to 'all-F'
busyResp.resp := Fill(DMIConsts.dmiRespSize, 1.U) // Generalizing busy to 'all-F'
busyResp.data := UInt(0)
nonbusyResp.addr := dmiReqReg.addr
nonbusyResp.resp := io.dmi.resp.bits.resp
nonbusyResp.data := io.dmi.resp.bits.data
dmiResp.addr := dmiReqReg.addr
dmiResp.resp := io.dmi.resp.bits.resp
dmiResp.data := io.dmi.resp.bits.data
nopResp.addr := UInt(0)
nopResp.resp := UInt(0)
nopResp.data := UInt(0)
//--------------------------------------------------------
// Debug Access Chain Implementation
dmiAccessChain.io.capture.bits := Mux(busy, busyResp, nonbusyResp)
dmiAccessChain.io.capture.bits := Mux(busy, busyResp, Mux(io.dmi.resp.valid, dmiResp, nopResp))
when (dmiAccessChain.io.update.valid) {
skipOpReg := Bool(false)
downgradeOpReg := Bool(false)
@ -177,24 +189,25 @@ class DebugTransportModuleJTAG(debugAddrBits: Int, c: JtagDTMConfig)
when (dmiAccessChain.io.capture.capture) {
skipOpReg := busy
downgradeOpReg := (!busy & nonzeroResp)
stickyBusyReg := busy
stickyBusyReg := busy
stickyNonzeroRespReg := nonzeroResp
}
//--------------------------------------------------------
// Drive Ready Valid Interface
assert(!(dmiAccessChain.io.update.valid && io.dmi.req.ready), "Conflicting updates for dmiReqValid, should not happen.");
when (dmiAccessChain.io.update.valid) {
when (skipOpReg) {
// Do Nothing
}.elsewhen(downgradeOpReg || (dmiAccessChain.io.update.bits.op === DMIConsts.dmi_OP_NONE)) {
// Do Nothing
dmiReqReg.addr := UInt(0)
dmiReqReg.data := UInt(0)
dmiReqReg.op := UInt(0)
}.otherwise {
when (downgradeOpReg) {
dmiReqReg.addr := UInt(0)
dmiReqReg.data := UInt(0)
dmiReqReg.op := UInt(0)
}.otherwise {
dmiReqReg := dmiAccessChain.io.update.bits
}
dmiReqReg := dmiAccessChain.io.update.bits
dmiReqValidReg := Bool(true)
}
}.otherwise {

View File

@ -1097,19 +1097,13 @@ class DMIToTL(implicit p: Parameters) extends LazyModule {
val (_, gbits) = edge.Get(src, addr, size)
val (_, pfbits) = edge.Put(src, addr, size, io.dmi.req.bits.data)
// Note we force DMI NOPs to go to CONTROL register because
// Inner may be in reset / not have a clock,
// so we force address to be the one that goes to Outer.
// Besides, for a NOP we don't really need to pay the penalty to go
// across the CDC.
val (_, nbits) = edge.Put(src, toAddress = (DMI_RegAddrs.DMI_DMCONTROL << 2).U, size, data=0.U, mask = 0.U)
when (io.dmi.req.bits.op === DMIConsts.dmi_OP_WRITE) { tl.a.bits := pfbits
}.elsewhen (io.dmi.req.bits.op === DMIConsts.dmi_OP_READ) { tl.a.bits := gbits
}.otherwise { tl.a.bits := nbits
when (io.dmi.req.fire()) {
assert (io.dmi.req.bits.op === DMIConsts.dmi_OP_WRITE || io.dmi.req.bits.op === DMIConsts.dmi_OP_READ,
"Invalid DMI Request Type.");
}
tl.a.bits := Mux(io.dmi.req.bits.op === DMIConsts.dmi_OP_WRITE, pfbits, gbits);
tl.a.valid := io.dmi.req.valid
io.dmi.req.ready := tl.a.ready