#include <SD.h>                      // need to include the SD library
//#define SD_ChipSelectPin 53  //example uses hardware SS pin 53 on Mega2560
#define SD_ChipSelectPin 5  //using digital pin 4 on arduino nano 328, can use other pins
#include <TMRpcm.h>           //  also need to include this library...
#include <SPI.h>

TMRpcm tmrpcm;   // create an object for use in this sketch

unsigned long time = 0;

void setup(){

  tmrpcm.speakerPin = 9; //5,6,11 or 46 on Mega, 9 on Uno, Nano, etc
  //Complimentary Output or Dual Speakers:
  //pinMode(10,OUTPUT); Pin pairs: 9,10 Mega: 5-2,6-7,11-12,46-45 
  
  Serial.begin(9600);
  //pinMode(13,OUTPUT); //LED Connected to analog pin 0
  if (!SD.begin(SD_ChipSelectPin)) {  // see if the card is present and can be initialized:
    Serial.println("SD fail");  
    return;   // don't do anything more if not

  }
  else{   
    Serial.println("SD ok");   
  }
  tmrpcm.volume(2);
  tmrpcm.play("coffee.wav"); //the sound file "music" will play each time the arduino powers up, or is reset
}



void loop(){
  //blink the LED manually to demonstrate music playback is independant of main loop
  if(tmrpcm.isPlaying() && millis() - time > 50 ) {      
      //digitalWrite(13,!digitalRead(13));
     // time = millis();    
  }else
  if(millis() - time > 500){     
    //digitalWrite(13,!digitalRead(13)); 
    //time = millis(); 
  }


  if(Serial.available()){    
    switch(Serial.read()){
    case 'c': tmrpcm.play("coffee.wav"); break;
    case 'p': tmrpcm.pause(); break;
    case '?': if(tmrpcm.isPlaying()){ Serial.println("A wav file is being played");} else{Serial.println("No wav file is being played");} break;
    case 'S': tmrpcm.stopPlayback(); break;
    case '0': tmrpcm.volume(0); break;
    case '1': tmrpcm.volume(1); break;
    case '2': tmrpcm.volume(2); break;
    case '3': tmrpcm.volume(3); break;
    case '4': tmrpcm.volume(4); break;
    case '5': tmrpcm.volume(5); break;
    case '6': tmrpcm.volume(6); break;
    case '7': tmrpcm.volume(7); break;
    case '=': tmrpcm.quality(0); break;
    case '-': tmrpcm.quality(1); break;
    default: break;
    }
  }

}